Optical Network Transport (ONT)

Highly configurable, multi-application and multi-port platform for system verification and acceptance testing. High-speed testing for high-speed optical networks.

The modular design of the ONT-600 platform offers high flexibility and lets users operate multiple test modules simultaneously. The ONT-600 comes in a variety of mainframes and application modules, ranging from “single-port” point tools up to a full 19” rack-mounted multi-slot, multi-port and multi-user solution that satisfies sophisticated SVT needs.

  • Benefits

    All application modules share the same GUI and identical automation and scripting, so that they can be used throughout the product development cycles.

  • Applications

    • Detailed hardware level testing with unframed and protocol based traffic.
    • 25G, 50G, 100G and 400G Optical Modules validation: electrical lanes stressing (clock offset variation, TX pre-emphasis and RX equalization manipulation, dynamic skew) per IEEE standards, MDIO/I2C management interface verification (peek/poke, HW pins control, MDIO/I2C Dump)
    • Support for OTN, Ethernet, Fibre Channel, CPRI, and SONET/SDH
    • Qualify PTP (IEEE 1588) implementations in optical networks and equipment
    • Full service disruption and latency measurements for all supported technologies
    • Equipment Manufacturers: Support for R&D, SVT (system verification/test), and production environments covering the entire product life cycle
    • Service Providers: Conduct product qualification and benchmark testing before deployments and bring to the field for first office applications (FOA)
    • Data Centers: Fully verify data center interconnect elements and long-haul transmission elements for quality and performance and fully stress and verify pluggable optics including active optical cables.
  • Key Features

    • Multiple mainframe options including rackmount, desktop, and modules with built-in display for mobile test needs.
    • Supports testing of all major transport technologies for equipment manufacturers, service providers, and data centers
    • OTN: up to OTU4 with ODU Muxing down to ODU0; ODUflex, ODU multichannel, and FlexO
    • Ethernet: Gigabit Ethernet up to 400 GE and FlexE fully supported with full stress/margin analysis
    • SDH/SONET: 155 Mbps up to 40G
    • Fibre Channel: 1/2/4/8/10/16G FC
    • CPRI unframed and framed testing: CPRI line bit rate option 1 (614.40 Mbps) up to option 9 (12.165 Gbps)
    • Most accurate latency and service disruptions measurements for OTN, Ethernet, CPRI, Fibre Channel, and SONET/SDH
    • Browser-oriented graphical user interface (GUI)
    • Full multitasking operation
    • Full automation support via CLI or with drivers and libraries for LabWindows CVI, LabView, Python and Tcl/Tk
Products
The ONT-100G solution supports testing and verification for new high-speed network elements for 40 GE and 100 GE and enables the development of 100G products based on CFP and CFP2 technologies.
The MTM provides high density 155M to 11.3G testing at layers 1 through 3. Concurrent users can control a broad protocol range including OTN, GigE/10GigE LAN, SONET/SDH, and Fibre Channel.
The 400G CFP8 Module is a scalable test solution based on the latest draft standard for 400G Ethernet (IEEE 802.3 bs) and ready for OTUC4. It boasts a CFP8 slot to host the first-generation 400G pluggables; future FlexE and FlexO applications are addressed via 5 QSFP28 slots.

Asistencia en cada paso

Proporcionamos soporte técnico, servicios, una formación completa y los recursos que necesita. Todo ello forma parte de lo que hacemos con el fin de maximizar el valor de su inversión en VIAVI.

Servicios

Valor y servicios que complementan su catálogo de instrumentos y soluciones de sistemas VIAVI para proporcionar un coste total de propiedad excelente

Atención al cliente

Ofrecemos un servicio de atención al cliente que proporciona solicitudes de autorización de devolución de material (RMA) para tareas de reparación y calibración

Formación

Soluciones educativas técnicas, formación sobre productos y una formación combinada para técnicos que utilizan productos nuevos o trabajan con herramientas existentes

Asistencia técnica

El centro de asistencia técnica (TAC) le ayudará a utilizar y configurar los productos y se encargará de los problemas relativos al rendimiento del producto

Primeros pasos

¿Le interesa una demostración de algún producto? Póngase en contacto con nosotros para obtener más información, recibir un presupuesto o averiguar cómo adquirir un producto.