E3/T3 (DS3) LIM (J6813B) (Discontinued)

The VIAVI E3/T3 (DS3) LIM (J6813B) helps network professionals isolate and resolve network problems quickly and has 75 Ohm BNC connectors.

This product has been discontinued.

This product has been discontinued

6/30/2017

The VIAVI E3/T3 (DS3) LIM (J6813B) helps network professionals isolate and resolve network problems quickly.  Note that generation at the first software release is limited to through-mode repeater functionality. Other generation functionality will be available in a subsequent software release.

Key Features:

  • Can be configured to operate at the E3 (34 Mb/s) or T3 (45 Mb/s) line rate with E3 or DS3 framing, respectively, at 75 Ohm BNC interfaces
  • Hot-swappable - the LIM can be removed safely while an application is running and another LIM inserted in its place; the current application terminates and the user can launch another suitable application for the new LIM without having to power down and restart the analyzer
  • Can be configured to operate at the E3 (34 Mb/s) or T3 (45 Mb/s) line rate with E3 or DS3 framing, respectively, at 75 Ohm BNC interfaces
  •  Has two receivers to provide bi-directional monitoring capability
  • Has two electrical outputs
  • Analysis at all layers of ATM, Frame Relay, HDLC/SDLC and PPP traffic
  • Full rate cell mode and frame mode ATM generation and ATM Ping
  • Auto-discovery of the VPI-VCIs of up to 4,096 ATM virtual channels
  • Real-time simultaneous AAL-2 and AAL-5 reassembly on up to 4096 virtual channels (user controls which)
  • ATM Policing, Traffic Contract Estimation and 1-point CDV on multiple virtual circuits simultaneously
  • Hardware filters for capture and analysis based on VPI-VCI (other hardware filtering is provided in the related internal data acquisition system of the analyzer platform)
  • Delivery of frames and/or cells to the related internal data acquisition system in the analyzer for full rate capture and analysis
  • Real-time line status and statistics
  • Electrical pulse amplitude measurements on each receiver
  • Can be used with the J6800A Network Analyzer, J6801A Distributed Network

Como começar

Tem interesse em uma demonstração de produto? Fale conosco para obter mais informações, receber uma cotação ou saber como comprar.