Read Me 		JDSU Driver V2.87 additional information

Supported devices: 

SmartPocket:	OLP-34, OLP-35, OLP-38
SmartClass:	OCC-55, OCC-56, OLA-55M, OLP-55, OLP-57, OLS-55, OLT-55, ORL-55, 
c-Series:	cOPM-A1, cORL-A1

Supported operating systems:

Windows 2000
Windows XP, 32 Bit
Windows Vista, 32 Bit
Windows 7, 32 Bit and 64 Bit

User Guide:

Step 1: 

Install the appropriate driver(s) BEFORE connecting the device to the PC.

Connecting the device without properly installed drivers will produce a faulty entry in the Windows Device Manager. This entry needs to be removed manually.

Step 2:

Connect the device via USB cable to the PC.
Windows will allocate a COM number (i.e. “COM 4”) to the connection.
This number can be checked using the Windows Device Manager.

Step 3:

Start Hyperterminal or any other serial port communication program.

Configure the serial port as follows:

Smart Pocket devices:

	Bits per second:	19200
	Data bits:		8
	Parity:		None
	Stop bits:		2
	Flow control:	None

Smart class devices and c-series devices:

	No manual configuration needed.

Step 4:

Test the connection using the query “:SYST:ERR?” that is supported by all devices. Repeat the query until the answer is “0, no error”.
The query “*IDN?” will cause the device to send an identification string (i.e. “JDSU DEUTSCHLAND GMBH, OLP-35/12, A-0057, V02.00”).

Document created by JDSU Germany GmbH, Eningen 
Date: November 26, 2010