当前位置

光学制造测试平台

光连接器和无源器件测试

单模插入损耗/回波损耗测试仪,完全 EF 兼容的多模插入损耗测试模块,用于 Viavi 先进的 MAP-200 平台。
无源 DWDM 设备、ROADMs & Circuit Packs 的制造和新设备开发的测试解决方案。 详细描述与波长相关的性能
集成的自动化测试设备,用于测试光学元件在温度/湿度试验箱内、受到环境压力条件下的长期可靠性。

光学信号调节和切换 

基于行业领先的第四代仪器类 Viavi 光开关技术构建的光开关解决方案。
Range of fully non-blocking optical switch modules from Polatis designed for OEM integration.
Polatis 多模光纤交换机托盘,利用 DirectLight® 波束控制技术,是一款结构紧凑、完全无阻塞的多模高性能产品。
Polatis 非模块化光开关组件系列,专为 19" ANSI 和 ETSI 机柜设备使用设计。
High-performance, fully non-blocking all-optical 80x80 matrix switch designed with exceptionally low optical loss, compact size, low power requirements and fast switching speeds.
Polatis将光开关、衰减器和功率计完美地集成在一个紧凑的平台中。
map-200-passive-utility-module
The MAP-200 Utility Module, mUTL-C1, provides a range of passive optical devices such as couplers, splitters, Mux/Demux modules and band-pass filters to simplify the integration of these devices into automated test systems

光源和放大器

MAP-200 可调谐分布式布拉格反射镜(DBR)激光器(mTLG-C1)是新一代的可调谐激光器,对于必须在 C 波段内以 50GHZ 间隔调整波长的 DWDM 测试来说,它是再理想不过的激光器设备。
The MAP-200 Broadband Source (mBBS-C1) provides an amplified spontaneous emission (ASE) output that is ultra-stable, spectrally flattened and high-power density across the extended C-band.
The MAP-200 Erbium Doped Fiber Amplifiers (mEDFA-C1) meet some of the most demanding optical specifications including a low-noise version with <3.7dB noise figure. DWDM, high power and an L-band version are also available.
The MAP-200 general purpose light sources (mSRC-C2) are fiber-coupled, fixed-wavelength emitters that cover key Telecom/Datacom wavelength bands of 850, 1300, 1310, 1490, 1550, and 1625 nm.

多应用平台 (MAP) 机箱

优化的光测试和测量平台用于高效益的开发和光传输网络网元的制造
提供一个灵活的、更具成本效益的紧凑平台,用于光学设备和子系统开发及制造中的光学测试切换和信号调节。

光源、功率和光谱测量

面板安装或远程头配置
​The MAP-based integrated multi-wavelength meter and high resolution optical spectrum analyzer module combines sub-GHz resolution performance and compact modularity in a single slot cassette.

光学信号调节

High-resolution, wide wavelength-range attenuator ideal for use in applications such as analog systems and high bit-rate digital systems.
The Multiple Application Platform (MAP-200) multiport tunable filter module (mTFX-C1) dramatically simplifies test signal management for next-generation 100 G+ interfaces, sub-systems, and system test.
The MAP-200 Polarization Control Module (mPCX-C1) provides polarization scrambling, control and stabilization for use in applications such as temporal depolarization, 100G+ coherent interface testing as well as stabilization and tracking of target SOP conditions
map-200-passive-utility-module
The MAP-200 Utility Module, mUTL-C1, provides a range of passive optical devices such as couplers, splitters, Mux/Demux modules and band-pass filters to simplify the integration of these devices into automated test systems