Todos los productos

Copy fast ethernet traffic from a full-duplex copper link for a copper monitoring device
Aggregate full-duplex traffic but also convert that traffic to be analyzed by a copper or optical single-receive analysis or security device
Copy full-duplex traffic and aggregates the traffic into a single stream to any analysis or security device with a single-receive capture interface
Copy gigabit traffic from a full-duplex copper link for a copper monitoring device
Copy gigabit traffic from a full-duplex copper link for a copper or optical monitoring device
Trilithic 180 DSP
The 180 DSP is a signal level meter specifically tailored for installation and troubleshooting of RF signals. Featuring fast measurements and powerful troubleshooting tools, the 180 DSP comes equipped with all the tests an installer needs to measure both Analog and Digital signals and ensure the highest quality installation—and includes a price point that makes it feasible for system operators to outfit their entire fleet.
Trilithic 1G DSP
The 1G DSP conveniently combines CATV, DOCSIS 3.1 Cable Modem, Gigabit Ethernet, and Optical testing in a single meter for troubleshooting and maintenance of your entire HFC plant.
El sistema 1G DSP con TDR tiene la ventaja de reunir funciones de pruebas de televisión por cable, de módem de cable DOCSIS 3.1 y de TDR de cable en un solo instrumento portátil de gran robustez.
3550R Touch-Screen Radio Test System
The first hand-held Radio Test Set. Full radio test set functions in a lightweight hand-held platform
Trilithic 360 DSP
The 360 DSP is the first meter designed specifically to simplify Home Certifications. Built from the ground up, tailored specifically for the needs of fulfillment, this meter is ideal for standardizing processes and procedures for installation and service. The 360 DSP also includes a price point that makes it feasible for system operators to outfit their entire fleet.
3920B Series Analog and Digital Radio Test Platform
The industry standard for analog and digital radio test
VIAVI OSP has been delivering 3D depth sensing filters from the technology’s roots in the revolutionary Microsoft Xbox Kinect. Through multiple generations of increasing performance and decreasing cost, we remain the industry’s leading supplier of high performance filters for depth-sensing systems in consumer electronics.
The VIAVI 10 GigE/GigE Interface (J6873A) is a half-length, full-height PCI Express® interface card that provides full 10 gigabit capture, extensive filtering, and network key performance indicators to solve more network problems quickly.
7200B Configurable Automated Test Set
The industry’s premier instrument platform for production, depot level maintenance and field test of current and next generation radio systems
800G FLEX Module
400G QSFP-DD Test Module for the ONT-800
The 802 AWE™ is a handheld wireless network test set that is designed to help identify and resolve many problems that are encountered during Wi-Fi, ZigBee, or Bluetooth wireless network deployments.
8150 TETRA AirAnalyzer
EXCLUSIVE TETRA Network QoS Analysis, Protocol Logging and System Performance Analysis
8380 RPC
The 8380 RPC Return Path Combiner is a programmable 16 x 1 non-blocking RF matrix switch designed for use with the 8310 RSA Return Sweep Analyzer in the return path of CATV systems.
8800SX Digital Radio Test Set
Advanced Analog and Digital Radio Test Set for Bench and Field Environments
9581 SST
The 9581 SST Return Path Analyzer is the only DSP-based return path analyzer in the industry.
ACTS Software
Server application enables a proprietary connection with the Original or New DSP Family of Field Analyzers for communication and testing Packet Loss, Latency, Jitter and MOS of VoIP services.
ADS-B INTEGRITY ADS-B Out Integrity Test Application
Performance testing of ADS-B Out equipment
ALT-8000 FMCW/Pulse Radio Altimeter Flightline Test Set
Versatile time-saving portable test set for testing installed FMCW and pulse radio altimeters
ALT-8015 FMCW/Military Pulse Radio Altimeter Test Set
Versatile time-saving portable test set for testing installed FMCW and military pulse radio altimeters
APM-424 MK XII/XIIA Test Sets
Fast, reliable performance testing for mission-readiness
ATC-5000NG NextGen Transponder
Prepare for Global ATC Modernization with NextGen test technology
Icon-based map view of OTDR events and instant pass/fail display for easy OTDR results interpretation and analysis.
CERTiFi es una solución basada en la nube para equipos que diseñan, crean, prueban y certifican el cableado estructurado de redes empresariales.
The COSA-4055 module offers the functionality and speed of an OSA in a handheld form factor at a fraction of the price of a traditional OSA. It is an ideal test tool for metro/access links and CWDM systems.
CPRIAdvisor CAP-100/CAE-100/CAM-100
CPRIAdvisor is an interference monitoring solution that increases RF visibility by performing continuous monitoring of the mobile spectrum, and allowing remote access to expedite maintenance and problem resolution.
Plugs into market leading T-BERD/MTS test instruments to create the smallest, portable 100G test solutions for both out in the field and in the central office.
CT-4
El etiquetador CT-4 es un etiquetador de canales digitales que se emplea como sistema con el detector de fugas digitales Seeker D para detectar fugas en las bandas de frecuencias aeronáutica y LTE, y eliminar todos los activadores de “falsas alarmas” al proporcionar portadoras CW duales propias en dos ubicaciones.
A CWDM OTDR test solution to deploy or maintain and troubleshoot in-service CWDM fiber networks
CellAdvisor 5G
El sistema CellAdvisor 5G de VIAVI es la solución portátil perfecta para validar todos los aspectos de la implementación, el mantenimiento y la gestión de las estaciones base 5G.
CellAdvisor ofrecen soluciones integradas para la medición de barrido de línea y la inspección de fibra con medidores de potencia RF/óptica en un instrumento, gestionable en la nube para la instalación y el mantenimiento de estaciones base.
La funcionalidad combinada incluye análisis de espectro, análisis de cable y antena, medidor de potencia, análisis de interferencias, escáner de canales, RFoCPRI™ y análisis de señal.
CellAdvisor RF Analyzer combines the functionality of spectrum analysis, cable and antenna analysis, and power measurements, covering all of your needs for test, acceptance, and troubleshooting of the physical layer of cellular networks.
CellAdvisor Signal Analyzer combines the functionality of spectrum analysis, DAS, and power measurements, covering all of your needs for base station troubleshooting and maintenance.
El estándar del sector en certificación empresarial tanto para redes de cobre como de fibra.
Charms™ are printable taggants that covertly incorporate customized logos and are easily identified using a low-cost, portable microscope
ChromaFlair pigments are unique, multi-layer pigment flakes that give paints, coatings, plastics, textiles and packaging the ability to change color when viewed from different angles.
Advanced Fiber Optic Connector End Face Cleaning System
Compliance Assistant
Compliance Assistant software simplifies FCC EAS compliance through automation.
El comprobador de carga de canal de fibra Xgig es la herramienta de primera generación con un protocolo de canal de fibra de alta velocidad de 16 Gbps (16 GFC) disponible en el mercado.
CEA
The xSIGHT CEA Application enables the industry’s most effective assurance workflows via the real-time correlation of customer experience to the underlying network and service performance.
DTSS on the T-BERD/MTS-8000 platform
The portable DTSS on the T-BERD/MTS-8000 platform brings new DTSS technology to the field in a uniquely portable and high powered combination. This product can also be provided in a rack-mounted optical test unit within an OTU-8000 to be combined with ONMSi for a permanent fiber monitoring solution.
Allocate valuable testing and troubleshooting resources more effectively via remote PC access to the VIAVI communication analyzers
EASyCAP
A one-box solution for delivering CAP-based audio alerts with extended capabilities for broadcast radio systems.
EASyCAP
A one-box solution for delivering CAP-based audio and video alerts with extended capabilities for broadcast TV systems.
EASyCAP
A one-box solution for delivering CAP-based audio and video alerts with extended capabilities for cable TV and OTT systems.
EASyCAP
A one-box solution for delivering CAP-based audio and video alerts with extended capabilities for IPTV and OTT systems.
EASyCAP
Solución monovolumen para la entrega de alertas de audio y vídeo basadas en el CAP con funciones ampliadas para mercados internacionales.
Integrated automated test facilities for testing long-term reliability of optical components while subjected to environmental stress conditions in a temperature/humidity chamber.
A next-generation service assurance solution that addresses the entire Ethernet Service deployment life cycle including test and turn-up acceptance, SLA/performance monitoring and reporting, and test and troubleshooting with both hardware and virtualized software solutions.
eCo Architect
eCo Architect is an Eclipse-based development tool that lets you create, validate, and debug SCA software components and applications. Utilizes a visual modeling language that allows developers to unambiguously express every concept of the SCA graphically. Generates behavioral and structural source code that builds for all supported operating environments. Provides a Zero-Merge functionality to simplify business logic insertion.
eCo Hub
eCo Hub implements the SCA 4.1 Core Framework (CF) that deploys, configures and controls software applications on the target embedded system platform. It supports the largest combination of operating systems, object request brokers, and processors. Not being subject to ITAR restrictions, eCo Hub is based on the knowledge and optimization techniques acquired with the former SCARI CF that runs in thousands of battlefield deployed radios from different international radio manufacturers.
eCo Inspector
eCo Inspector is an Eclipse-based run-time monitoring tool that lets you install and control applications as well as visualize the structure of the running software. The NordiaSoft eCo Inspector is an essential tool for debugging and testing during SCA development.
Visual fault locators for fiber bends and breaks, localization of damages and end-to-end continuity check.
Identifies optical fibers by detecting the optical signals being transmitted through a single-mode fiber.
Live Fiber Identifier easily identifies the optical signal without having to disconnect the fiber or disrupt network traffic. Also converts to an Optical Power Meter (OPM).
FVAm Benchtop Microscopes
"All-in-one" benchtop inspection and analysis solution for multifiber connectors such as MPO
La solución integral para la inspección de conectores de fibra
Fiberchek Sidewinder
Solución integral portátil del sector para la inspección y el análisis de conectores multifibra como los conectores MPO.
Automatic bi-directional IL, ORL and OTDR test solution for use in the installation, turn-up, and maintenance of FTTx/PON, Access and Metro Networks.
Automatic bi-directional IL, ORL and OTDR test solution for use in the installation, turn-up, and maintenance of FTTx/PON, Access and Metro and Long Haul Networks.
Post-processing and reporting PC software to view, edit, analyze and generate accurate and updated documentation of field-acquired optical fiber test data.
Fuel Interfaces
Fuel Interface Cables
Una gama de fuentes de luz óptica de bolsillo y bajo costo para la instalación y el mantenimiento de redes de fibra óptica de modo único y modo múltiple.
Fusion, the cornerstone product of the vNet solution set within the VIAVI NITRO™ platform, provides software-based lifecycle management for test, service activation, performance monitoring and troubleshooting on all network layers.
GEOanalytics delivers a sophisticated API to allow third party applications to make direct use of the location intelligence, with the additional dimension of building level resolution location information.
GEOinsights unlocks the power of the location intelligence. The data feed transforms the detailed connection centric data into an anonymized, aggregated feed of insights about places, people, and time, enabling new revenue streams through data monetization.
The modular approach of GEOoptimize, deployed as a service or as a solution, meets the complexity issues operators face today by delivering automated network performance optimization harnessing the power of geo-located subscriber-centric intelligence.
NITRO GEO GEOperformance, powered by the Network Integrated Test, Real-time analytics and Optimization (NITRO) intelligence platform, uses location intelligence to transform RAN planning and performance engineering by increasing operational efficiency, and significantly increasing return on investment, while delivering game changing improvements in the network performance actually experienced by customers.
GPSG1000
High-end test capability ideal for validating the performance of GPS enabled devices
Advanced handhelds display systems that integrate fiber inspection and testing into a single portable solution.
Premier triple –play access network tester installs and maintains copper and fiber based bonded ADSL/VDSL, IPTV, Microsoft TV, VoIP and data plus legacy networks.
The VIAVI Solutions® Hi-Res Multimode OTDR solution has been designed to characterize and locate faults on very short multimode fiber runs deployed in aircraft, spacecraft, submarines, and ships.
High-Density Optical nTAP
With several options available, you can scale up to 24 modules in one unit of rack with the High-Density Optical TAP.
The I-Stop reverse test probe is a test accessory you can use with signal level meters and/or analyzers for bi-directional measurements with no risk of power damage.
IFF-45TS
Provides RF signal generation and parametric measurement of MK XIIA and TACAN equipment
IFF-7300S Series IFF/Crypto/TACAN Automated Test System
For military transponders, interrogators, cryptos and TACAN transceivers
IFR 4000 Nav/Comm Flightline Test Set
Equips the maintenance technician with the most portable nav/comm ramp test set on the market today
IFR6000 Transponder/DME/TCAS Flight Line Test Set
Industry standard test solution for installed systems
IFF-7300S Series IFF/Crypto/TACAN Automated Test System
Supports military IFF transponder modes and TACAN
16x1 5-1000 MHz, 75 Ohm, RF input switch controlled by the RSAM to provide monitoring at up to 128 different test points.
An easy-to-use solution that allows users to quickly locate an interference source by following guidance on a tablet-based map application.
JMEP is a powerful micro Ethernet probe for Ethernet and IP performance assurance.
JTNC APIs
Ensure interoperable, secure, and cost efficient waveforms and wireless communications by recommending standards, conducting compliance and certification analyses in accordance with DoD policies, and maintaining a DoD Waveform IR.​
Ponga a punto la red coaxial doméstica con este kit, que permite a los técnicos encontrar fugas con el medidor de nivel de señal (DSP u ONX).
LAW
La aplicación LAW, junto con Seeker GPS, constituye un sistema de gestión de fugas que permite a los operadores buscar y solucionar fugas rápidamente.
VIAVI OSP has a rightful claim to mastery. Since 1948, we have continued to pioneer the development of advanced optical coating technologies.
As technology companies and auto makers add new functionality to make cars more automated, LiDAR (Light Detection and Ranging) systems play an important role in ensuring that cars accurately sense and react to the environment around them.
VIAVI OSP has a rightful claim to mastery. Since 1948, we have continued to pioneer the development of advanced optical coating technologies.
VIAVI OSP has a rightful claim to mastery. Since 1948, we have continued to pioneer the development of advanced optical coating technologies.
The Multiple Application Platform (MAP) multiport tunable filter module (mTFX-C1) dramatically simplifies test signal management for next-generation 100 G+ interfaces, sub-systems, and system test.
Panel mount or remote head configurations with densities up to 4 per module.
Optical Switch Solutions built on the industry-leading, fourth-generation instrumentation class of VIAVI optical switch technology.
Singlemode Insertion Loss / Return Loss test meter and fully EF-compliant multimode Insertion Loss test modules for use with the VIAVI advanced MAP-200 platform.
Test solution for manufacturing and new device development of passive DWDM devices, ROADMs & Circuit Packs. Provides full characterization of wavelength dependence performance.
MAP-200 Tunable Distributed Bragg Reflector (DBR) laser (mTLG-C1) is a new-generation tunable laser that is ideal for DWDM testing where the capability to change wavelength on demand over the C- band with 50 GHz spacing is essential.
High-resolution, wide wavelength-range attenuator ideal for use in applications such as analog systems and high bit-rate digital systems.
The MAP-200 Broadband Source (mBBS-C1) provides an amplified spontaneous emission (ASE) output that is ultra-stable, spectrally flattened and high-power density across the extended C-band.
The MAP-200 Erbium Doped Fiber Amplifiers (mEDFA-C1) meet some of the most demanding optical specifications including a low-noise version with <3.7dB noise figure. DWDM, high power and an L-band version are also available.
The MAP-200 general purpose light sources (mSRC-C2) are fiber-coupled, fixed-wavelength emitters that cover key Telecom/Datacom wavelength bands of 850, 1300, 1310, 1490, 1550, and 1625 nm.
Single-channel, polarization-independent semiconductor optical amplifier (SOA)
map-200-passive-utility-module
The MAP-200 Utility Module, mUTL-C1, provides a range of passive optical devices such as couplers, splitters, Mux/Demux modules and band-pass filters to simplify the integration of these devices into automated test systems
The MAP-200 Polarization Control Module (mPCX-C1) provides polarization scrambling, control and stabilization for use in applications such as temporal depolarization, 100G+ coherent interface testing as well as stabilization and tracking of target SOP conditions
MAP-2100
The one tool data center operators need to remotely test transmission quality of the network connecting its data centers, central offices, or head ends.
Provides a flexible, more cost-effective compact platform for optical test switching and signal conditioning in optical device and sub-system development and manufacturing.
MCV-1
Mobile calibration verification unit that is used as a signal source for checking the calibration of both the Original and New DSP Family of Field Analyzers as well as most typical field analyzers.
MP-60/-80
Mide la potencia óptica a través de una conexión USB 2.0 a un PC, portátil o dispositivo inteligente. Además, hace posible el procesamiento digital de mediciones de potencia óptica y se integra directamente con el software de FiberChekPRO y FiberChekMOBILE de VIAVI.
T-BERD/MTS-2000
Equipo de pruebas portátil para la instalación, la puesta en marcha y el mantenimiento de redes de fibra óptica.
T-Berd/MTS 4000
Solución todo en uno de bahía doble integrada para automatizar la certificación y las pruebas ópticas y de fibra
Este probador es el instrumento portátil 10G más pequeño del mercado y es capaz de realizar pruebas a lo largo de todo el ciclo de vida del servicio, incluidas la caracterización de fibra, la activación de servicios, la solución de problemas y el mantenimiento.
Medidor de potencia óptica para pruebas de canal descendente y de ruta de retorno en sistemas RFoG y PON.
Medidores de instalación y servicio DOCSIS 3.1 robustos y compactos para proveedores y contratistas de servicios de cable.
Medusa Labs Test Tools Suite is leading application-based data testing and signal integrity testing tool enabling developers to identify, locate, and resolve elusive errors through stress testing before products are released to market.
MicroNIR OnSite-W Probe
The MicroNIR™ OnSite is a compact, ruggedized and ergonomic design making it ideal for applications in the field or on the manufacturing floor. MicroNIR OnSite is controlled by tablet PC based software with intuitive user interface which requires minimum training to operate.
The MicroNIR™ PAT-U is a USB-powered rugged NIR spectrometer. It is the smallest of its kind on the market making it suitable for use on equipment of different sizes as well as implementation of multiple of the analyzers on a given process.
The MicroNIR™ PAT-W is a battery-powered rugged NIR spectrometer equipped with WiFi connectivity for data communication making it suitable for use on rotating blenders as well as other stationary process equipment.
The MicroNIR™ Pro is an excellent development tool for a new user assessing the feasibility of NIR spectroscopy for their applications. The product is offered with a number of accessories that allow for ease of use in an at-line or laboratory setting.
MicroNIR Onsite
The MicroNIR™ Tablet Probe was specifically designed for the rapid analysis of individual pharmaceutical tablets & pills, single grain kernels & seeds, and similar material types. In addition to these samples, the Tablet Probe can also be used for the analysis of powders contained in plastic bags in both large and small volumes.
Mission Test
Is your radio mission ready?
AXIe - Modular Instrumentation
We are pleased to announce its new modular line of products based upon the latest AXIe standard. The new AXIe chassis is the world’s first to support both the Wide PCI Express Extensions for AXIe and PCIe Gen3 backplane data rates, making it the test and measurement industry’s highest-throughput modular chassis.
​The MAP-based integrated multi-wavelength meter and high resolution optical spectrum analyzer module combines sub-GHz resolution performance and compact modularity in a single slot cassette.
4100-Series DWDM Module
Una solución para pruebas OTDR DWDM orientada a implementar, mantener y solucionar problemas en redes de fibra DWDM en servicio
El probador multifunción 10 GigE más compacto del sector para la instalación y el mantenimiento de servicios de protocolo de Internet y Ethernet de nivel de portadora.
Solución integrada todo en uno que automatiza pruebas de OTDR de cables MPO
Solución de prueba OTDR para la instalación, la puesta en marcha y el mantenimiento de redes de Empresa, FTTx, Acceso, Metro y redes de larga y ultralarga distancia.
NEON Signal Mapper
Signal mapping to provide complete critical in-building coverage
The heart of the VIAVI Location Intelligence solution is the NITRO Mobile platform, which connects to the Network OSS to collect customer generated trace data. Using patented methods the billions of events per day are geolocated, analyzed and loaded into the intelligence store.
Provides performance management capabilities including data collection, correlation, analytics and reporting enabling service providers to proactively identify faults, troubleshoot and resolve problems and perform trend analysis and capacity planning.
Centralized Ethernet turn-up test and troubleshooting tool for Service Activation of Business Ethernet and Mobile Backhaul applications.
OCC-4056C DWDM Optical Channel Checker Module
The OCC-4056C module offers the functionality and speed of an OSA in a handheld form factor at a fraction of the price of a traditional OSA. It is an ideal test tool for metro/access links and DWDM systems.
Sistema de monitorización y pruebas de redes de fibra óptica ONMSi para redes principales, metropolitanas, de acceso y FTTH.
The 400G CFP8 Module is a scalable test solution based on the latest standard for 400G and 200G Ethernet (IEEE 802.3 bs) and ready for OTUCn. It boasts a CFP8 slot to host the first-generation 400G pluggables, support for upcoming QSFP-DD and OSFP available via adapters. FlexE and FlexO applications are addressed via 5 QSFP28 slots.
ONT-600 FlexE
Software Option for ONT-600 QFLEX, CFP8 QFLEX Data and CFP8 PHY Module
The MTM provides high density 155M to 11.3G testing at layers 1 through 3. Concurrent users can control a broad protocol range including OTN, GigE/10GigE LAN, SONET/SDH, and Fiber Channel.
The VIAVI ONT N-PORT module is a 4-port solution for test and system verification of 100G-class products. It supports four native, fully independent QSFP28 or SFP28 ports. Test applications include Ethernet, OTN, and Fiber Channel.
The CFP and CFP2 Test Modules support testing and verification of new high-speed network elements for 25GE, 40GE, OTU3, 50GE,100GE and OTU4. They enable the development of 100G class products based on CFP and CFP2 technologies. CFP4 and QSFP28 support is available via adapters.
ONT-800 Rack
Highly configurable, multi-protocol, multi-port test platform for R&D and system verification of optical transport ICs, modules, and systems
Compact full band optical spectrum analyzers for CWDM, DWDM and ROADM systems testing.
Full range of optical spectrum analyzers for spectral measurements in CWDM, DWDM, and ROADM testing-based systems, providing true OSNR measurements based on the unique VIAVI in-band OSNR method.
High resolution OSA with lab performance in a field-ready tester for spectral analysis of 10/40/100 and 400 G DWDM networks.
The first in-service, in-band Pol-Mux OSNR testing solution to optimize your high-speed network performance.
OTDR Modules – 4100-Series for T-BERD/MTS-2000, -4000 V2, -5800 Platforms
OTDR test solution for use in installing, turning up, and maintaining long-haul, metro, FTTx/PON, access, and enterprise networks.
Provides clear digital voice transmission over a single fiber; hands free operation makes communication convenient for technicians using a headset or speaker phone mode.
Automatice la monitorización de las redes ópticas con la unidad para pruebas de OTDR remota instalada en bastidor más compacta del mercado.
OTU-8000 Optical Test Unit
Automatice la monitorización de las redes ópticas con la unidad modular para pruebas OTDR automatizada de montaje en bastidor, que ofrece una amplia diversidad de módulos OTDR para llevar a cabo rastreos de OTDR típicos, así como mediciones de DTS y DTSS (detección distribuida de temperatura y carga).
OVF-1 Visual Fault Locator
For fault location in fiber optics networks.
Observer Analyzer
Observer Analyzer monitors unified communications (UC) deployments, network performance, applications, and troubleshooting on complex networks including VM environments.
Observer Apex offers end-user experience scoring with seamless integration to GigaFlow enriched records and GigaStor transaction details to help IT teams achieve optimal service delivery.
GigaFlow Summary Dashboard
Observer GigaFlow transforms flow-based analysis by combining multiple traffic and infrastructure data sources to provide deep performance management and network security insight
The best packet capture and analysis appliance in the industry ensures every network conversation is available for troubleshooting and deep-dive forensic investigations.
The Observer Management Server (OMS) UI features simple navigation to easily authenticate, control user access and passwords, administer upgrades, and streamline management from a single, centralized location.
Cover your edge and remote network sites with Observer Probes. Monitor performance and aggregate across sites with GigaStor within Apex for broad visibility into resource health.
Cuando realice una migración a la nube o intente garantizar el rendimiento de la TI híbrida, utilice Observer SightOps para obtener una visibilidad completa con diversos proveedores, incluidos AWS y Azure, entre otros.
Transfer network traffic from a full-duplex copper link to a copper analysis or security device in a single stream.
Copy traffic from a full-duplex copper link and send it to a copper or optical monitoring device – also available with aggregation functionality.
Easily send Ethernet traffic from a full-duplex copper link to a copper monitoring device with Observer Copper TAPs.
With several options available, you can scale up to 24 modules in one unit of rack with the High-Density Optical TAP (HDOT).
High-Density Optical nTAP
nTAPs are passive, full-duplex devices, offering complete visibility to monitoring devices regardless of traffic level. They work with the leading management tools for quick and easy deployment. nTAPs are transparent for monitoring critical links, and provide continuous network data flow even if power fails. nTAPs are scalable, modularized, space efficient, and economical.
SaaS-based, flexible, and quick to deploy active testing, ObserverLIVE empowers teams to overcome the potential pitfalls of hybrid IT while fully leveraging its business value.
Copy traffic from one full-duplex optical link for one optical monitoring device
Gracias a la plataforma de medición de análisis de señal OneExpert CATV, cualquier técnico puede convertirse en un experto, ya que permite verificar el rendimiento de la red y solucionar problemas de una forma más sencilla, más rápida y más eficaz que nunca.
Copy traffic from one full-duplex optical link to one optical monitoring device
Integrated fiber characterization and dispersion test solution combining PMD, CD, and AP measurements to characterize high speed networks.
Copy traffic from one full-duplex optical link to one copper monitoring device
Copy traffic from one full-duplex optical link to one copper monitoring device
La sonda de análisis e inspección automatizada de conectores de fibra permite valorar si el conector de fibra es apto para la conexión o no, utilizando PC, portátiles, dispositivos móviles y soluciones de pruebas de VIAVI.
Fast, cost-effective and accurate polarization mode dispersion (PMD) testing for high speed network characterization.
A fuel tester that makes a powerful difference in line and hangar maintenance
PSD90-1C AC/DC Fuel Capacitance Test Set
Technologically advanced test set, providing multiple functions for calibration and troubleshooting
Software para el mantenimiento y la optimización de los medidores de activación de servicios digitales (DSAM), proporciona gestión de datos de campo, gestión del medidor y acceso remoto del DSAM.
VIAVI OSP has a rightful claim to mastery. Since 1948, we have continued to pioneer the development of advanced optical coating technologies.
Plataforma de medición y pruebas ópticas optimizada para ofrecer un desarrollo y una producción rentable de elementos de red de transmisión óptica.
Obtenga siempre resultados de alto rendimiento cuando implemente un servicio de banda ancha rápida doméstica.
Polatis Optical Matrix Switches
The Polatis range of optical matrix switches provide versatility in optical switching applications
El medidor de potencia óptica para todos los técnicos de fibra: compacto, intuitivo, fiable y siempre seguro.
Enables fully automated service activation and verification for Carrier Ethernet applications including Business Services and Mobile Backhaul.
RGS-2000NG TCAS Test Set
Designed for engineering development, design validation, manufacturing and return-to-service TCAS testing
RSVP²
RSVP² for reverse path testing is designed specifically with the CATV installer in mind.
High-performance solution for 2, 2.5, 3 and 4G system verification, troubleshooting, and RAN optimization. Its intelligent call trace-centric approach supports the evolution of CDMA, including CDMA One and CDMA2000.
High-performance solution for 2, 2.5, 3 and 4G system verification, troubleshooting and RAN optimization. Its intelligent call trace-centric approach supports the evolution of GSM including EDGE, GPRS, EGPRS and UMTS.
High-performance solution for 2, 2.5, 3 and 4G system verification, troubleshooting, and RAN optimization. Specific benefits for IMS include advanced decodes, powerful call traces and efficient signaling analysis.
The VIAVI Signaling Analyzer Real Time is the test industry’s most complete, end-to-end analysis and troubleshooting solution for LTE networks, providing comprehensive monitoring and network diagnostics.
The VIAVI Signaling Analyzer Real Time (SART) is a high-performance solution for 2, 2.5, 3 and 4G system verification, troubleshooting, and RAN optimization. Its intelligent call trace-centric approach supports the evolution of SS7.
The VIAVI Signaling Analyzer platform accelerates development and deployment of 3G UMTS networks, helps customers perform verification, troubleshooting, and RAN optimization of ATM-Based UTRAN and migrate their networks to IP UTRAN architectures.
The headend/hub rack-mounted SCU-1800 provides non-interfering downstream sweep to 1.218 GHz and upstream sweep to 204 MHz on up to 16 ports.
SST Configure
This is the SST Configure software for the 9581 SST R3, 9581 SST R4, & 9581 SST R5 Return Path Analyzers.
Salus K12 EMS
Reliable, Effective, Instant Alerting at Your Fingertips
SecureShift inks provide an overt color-shifting appearance that enhances security through easy visual verification.
Seeker & MCA III
Seeker with MCA III is a GPS-based leakage management and CATV leak detection system for documentation and troubleshooting.
Seeker D Lite
The Seeker D Lite is a dual-mode and dual-frequency in-home leakage detector that accurately monitors leakage in all digital systems or in mixed digital and analog systems. The Seeker D Lite works with both the CT-4 Channel Tagger in the headend or the Seeker D Lite Source Transmitter in the field.
Seeker Setup
This is the Seeker Setup configuration software for the Seeker Product Family of Leakage Detectors.
Seeker D & MCA III
El modelo Seeker D con MCA III es un sistema de detección de fugas de televisión por cable y gestión de fugas basado en GPS que cuenta con un detector de fugas de doble banda capaz de monitorizar fugas dentro de la banda aeronáutica o la banda cerca de LTE, todo ello en un sistema digital completo.
Seeker HL
El sistema de evaluación de fugas domésticas Seeker HL es una solución de fugas digitales de bajo coste que incluye una fuente de señal etiquetada de doble frecuencia, con un nivel de salida seleccionable y un receptor de fugas discriminatorio que se ha diseñado para ofrecer una sensibilidad máxima a las fugas tanto en la banda de frecuencias aeronáutica como en la banda de frecuencias LTE.
The VIAVI Signaling Analyzer Real Time (SART) is a high-performance wireless test solution for 2, 2.5, 3 and 4G system verification, troubleshooting, and RAN optimization.
Single Fiber Insertion Loss & Return Loss System
PCT-rm is a MAP-220 based Insertion Loss (IL) and Return Loss (RL) solution targeting single fiber connector applications in the lab and in manufacturing.
dsp
El sistema DSP con TDR localiza de forma precisa las roturas y los fallos de los cables para volver a poner en marcha el servicio lo antes posible.
PathTrak proporciona unas funciones de análisis de espectro y QAM superiores que permiten unas funciones de monitorización y solución de problemas más eficientes y efectivas. PathTrak, ahora completamente compatible con el software XPERTrak, es una parte integral de la cartera de productos general de mantenimiento, monitorización y solución de problemas de HFC de VIAVI.
VIAVI small cell solution including NetComplete EtherASSURE and PacketPortal Intelligent Network Visibility and Ethernet Assurance Microprobes.
SmartClass 4800
Optimized for business services installation teams, the SmartClass 4800 is a highly efficient, modern tool for ensuring data and voice services achieve expected key performance indicators (KPI).
SmartClass Fiber MPOLx MPO Optical Loss Test Sets
El dispositivo SmartClass Fiber MPOLx de VIAVI Solutions es el primer equipo específico de pruebas de pérdida óptica del sector que permite realizar todas las operaciones obligatorias de las pruebas de la certificación de nivel 1 (básica) mediante la conectividad de fibra de MPO.
Optical power meters for the installation and maintenance of singlemode and multimode fiber optic networks. Combine pass/fail fiber inspection and optical power measurement into one solution.
Con un rango dinámico de 100 dB, los medidores de potencia óptica OLP-85 y OLP-85P son idóneos para cualquier tipo de aplicación de pruebas de pérdida y potencia de redes de fibra óptica.
The OLP-87 PON Power Meter enables simultaneous power measurement of all upstream & downstream wavelengths on live B/E/G-PON networks and is also compatible with next generation PON networks (XG(S)-PON, 10G EPON & NG-PON2).
El probador OLP-88 TruePON es una herramienta innovadora que emplea tecnología de análisis de datos GPON. Es el instrumento de pruebas perfecto para técnicos de campo que abordan tareas de activación del servicio de redes GPON y para equipos de asistencia encargados de atender quejas de servicio y que tienen que identificar el origen de los distintos problemas.
The OLS-85 inspection-ready optical light source is the ideal partner to the SmartClass Fiber OLP-85 and OLP-85P to perform automatic loss test.
Las soluciones más rápidas y sencillas para la certificación de fibra de nivel 1
The SmartClass Fiber ORL-85 and -85P combine microscope, optical power meter (OPM), light source (OLS), continuous wave return loss meter (OCWR), and connector inspection in one compact instrument.
Compact, low-cost test solution for installation, maintenance, and upgrades of CWDM & DWDM networks.
Atenuadores portátiles compactos y robustos para su uso en el laboratorio o en campo.
All-in-one tool for broadband services installation, including copper, ADSL 1/2/2+, WiFi, coax, HPNA, fiber, IP data, VoIP, and IP video testing.
Smart ID Plus
Solución para cableados coaxiales problemáticos que reduce el número de llamadas necesarias y mejora la experiencia del cliente.
SmartOTDR Handheld Fiber Tester
El SmartOTDR, compacto y ligero, acelera y optimiza las pruebas de campo de redes de acceso y metropolitanas con una interfaz OTDR personalizado y análisis automáticos que cualquier técnico puede manejar.
SmartOTU es una solución independiente para pruebas de fibra remotas que es capaz de detectar y localizar automáticamente fallos y monitorizar redes de fibra.
Una gama de medidores de potencia óptica de bolsillo y bajo costo para la instalación y el mantenimiento de redes de fibra óptica de modo único y modo múltiple.
Incluyen una fuente de luz (OLS-3x), un medidor de potencia (OLP-3x) y diversos accesorios.
SpectraFlair pigment is a multi-layer thin-film flake comprised of magnesium fluoride and aluminum. Precisely controlling the thickness and relief of the pigment’s flake structure produces the diffractive effect characteristic of SpectraFlair pigment.
There is a fascinating world to be seen beyond the range of human vision. Hyperspectral imaging – seeing beyond the visible spectrum with much more color detail – allows us to explore the invisible world that surrounds us.
Software de análisis, generación de informes, impresión y archivo de los resultados de las medidas.
StrataSync es una solución basada en la nube, que permite gestionar los activos, la configuración y los datos de prueba de los instrumentos de VIAVI, garantizando que éstos tengan instalada la versión y las opciones más recientes.
The T-BERD/MTS-5800-100G handheld network tester is the one tool that network technicians and engineers need to install and maintain their networks. It supports both legacy and emerging technologies to address network applications including metro/core, data center interconnect, and business services test applications.
Modular multifunction fiber and network interface test platform performs the widest ranging fiber and network tests
The T-BERD/MTS-8000 is the world’s most scalable test platform for next generation high speed network deployment (40G and 100G). It’s a multi-application platform with physical, optical and Transport / Ethernet testing capabilities.
The field-optimized Timing Extension Module (TEM) helps network operators maintain precise synchronization by delivering industry-leading accuracy to field portable timing and synchronization measurements.
The TM500 Test Mobile family is in use with almost every base station manufacturer across the world, and can be regarded as the de facto standard for network testing via RF.
Permite a los operadores de cable aumentar la satisfacción de sus clientes con medidas automáticas personalizadas que reducen considerablemente las peticiones de asistencia repetidas y mejoran la productividad.
WorkFlow automation software for the JDSU HST-3000 Handheld Services Tester.
TeraVM is an application emulation and security performance solution, delivering comprehensive test coverage for application services, wired and wireless networks.
TeraVM – 5G Core Emulator
One of the biggest challenges facing NEMs and mobile operators as they launch 5G is developing products against constantly changing and maturing 3GPP specs.
TeraVM 5G vRAN Emulator
The VIAVI TeraVM 5G vRAN emulator provides a full wraparound test of a 5G Standalone Core Network.
Delivering a fully virtualized application and security validation solution to test and secure devices, networks and their services
The founding principle of TeraVM is it’s a software only solution. TeraVM enables an elastic test bed which can be used to deliver software defined testing with reliable and repeatable results. TeraVM is agnostic to the hypervisors/hardware platforms on which the public clouds such as Amazon Web Services, Microsoft Azure, or indeed private cloud platforms of OpenStack or OpenMano are built upon.
Copy traffic from three full-duplex optical links for three optical monitoring devices
Throughput testing as a virtual network function based on RFC 6349.
Copy traffic from two full-duplex optical links for two optical monitoring devices
UC-584 Series Transponder Antenna Coupler
Providing repeatable test results on the ramp or in the hangar
Enables technicians to install and troubleshoot copper-based single pair and bonded pair VDSL2 and ADSL2+ circuits the right-way -- dual ended with UltraFED IIB.
The VSA-RF100 integrates both RF and MPEG analysis to quickly identify and troubleshoot customer-affecting issues down to the individual program level.
The VSE-1100 is the industry’s first converged digital spectrum video analyzer and noise-troubleshooting platform designed for the challenges of the converged cable access platform (CCAP) and remote PHY evolution.
The industry’s only software-based solution that monitors operators’ video services end-to-end from the video source to the end device with active and passive testing.
The Wander Analysis Software is an advanced synchronization evaluation tool with the ability to import and analyze TIE data.
El primer analizador de red LAN Wi-Fi/inalámbrica desarrollado para instaladores con todos los niveles de preparación, dotado de funciones intuitivas para una rápida caracterización, optimización y resolución de problemas de redes Wi-Fi domésticas.
Wireless Innovation Forum (WInnF) APIs
WInnForum members are dedicated to advancing technologies supporting the innovative utilization of spectrum and the development of wireless communications systems, including essential or critical communications systems.
XPERTrak
Hay muchos sistemas disponibles hoy en día para detectar problemas y fallos, pero solo XPERTrak™ ofrece la información y las herramientas para ayudar a corregirlos. Detecte suscriptores en riesgo antes de que acudan a otra empresa y aborde los problemas de forma rápida con herramientas integradas de detección y reparación, incluidas las fugas de señal de la planta y la interacción de los medidores de campo. El sistema virtualizado simplifica la transición a las nuevas tecnologías HFC, como DOCSIS 3.1 y la arquitectura PHY remota, y permite la continuidad de las funciones de mantenimiento esenciales de las redes HFC.
Comprehensive multiprotocol analysis, load testing, and error injection for all SAN/NAS technologies.
Xgig 1000 24 Gbps SAS Solution
Fully integrated, stand-alone system with 24/12/6/3 Gbps SAS multi-functions (Analyzer and Jammer)
Extensive Xgig capabilities and flexibility provide unmatched network visibility to more easily identify and resolve problems, accelerate new product design, and speed time-to-market.
The most powerful PCIe and NVMe analysis system available, offering complete visibility into traffic flows with advanced trace and analysis capabilities.
The Delay Emulator simplifies test setup and configuration and provides developers with a suite of powerful yet flexible capabilities to accurately emulate a variety of real world operating conditions.
The Xgig 10GbE and Fiber Channel Analyzer is a versatile, state-of-art solution for monitoring and analyzing live traffic of different storage protocols, including 10G Fiber Channel, 10GbE, iSCSI, FCIP, iFCP and iWARP.
Fully integrated, stand-alone system with 12/6/3 Gbps SAS multi-functions (Analyzer, Generator, Jammer)
XGIG 4K PCIe 4.0 Platform
The most powerful PCIe Gen 4.0 analysis system available, offering complete visibility into traffic flows with advanced trace and analysis and jamming capabilities.
The Xgig SAS/SATA analyzer is a critically-important tool for engineers developing and troubleshooting products and systems that involve the SAS/SATA protocols.
The powerful Traffic Generator extends the capabilities of the Xgig Analysis and Test Platform to create network traffic at line rate to stress test equipment during development and in-network.
The Xgig 8G Fiber Channel Analyzer offers a wide array of advanced analysis capabilities to enable users to achieve more robust product performance without sacrificing time-to-market.
Expert software comes standard with all Xgig Analyzers to provide a unique and robust set of debugging and analysis capabilities specifically designed to accelerate and simplify device development and troubleshooting.
The Xgig BERT solution simplifies signal integrity verification and high-speed bit error measurements by injecting data patterns into the traffic stream that create worst-case data loading conditions and stress a network's physical layer to its limits.
The Xgig Load Tester quickly and easily verifies data integrity, monitors network performance, and identifies a wide range of sophisticated problems across complex network topologies that would be too difficult to troubleshoot with an analyzer alone.
Xgig, designed for heavy-duty data traffic and complicated network structures, offers the industry a reliable analysis tool for high-bandwidth protocols such as GbE and iSCSI.Xgig® GbE/iSCSI Analyzer
The Xgig® Jammer manipulates live network traffic to simulate errors in real time, enabling users to verify the responsiveness and robustness of error recovery processes.
The xSIGHT Session Trace Application provides industry-recognized transaction tracing and decoding troubleshooting functionality much faster and at a lower cost than traditional solutions.
 xSIGHT Traffic Analysis Agent
Traffic Analysis Agents deliver Control and User Plane metrics in real-time via the xSIGHT Mediation component to xSIGHT or third-party monitoring apps.
Dexter Pham Jamie Owmbey
xSIGHT Traffic Storage Agents deliver Control and User Plane metrics in real-time to monitoring applications, plus store KPIs and Control Plane traffic for troubleshooting applications.