Tous les produits

Copy fast ethernet traffic from a full-duplex copper link for a copper monitoring device
Aggregate full-duplex traffic but also convert that traffic to be analyzed by a copper or optical single-receive analysis or security device
Copy full-duplex traffic and aggregates the traffic into a single stream to any analysis or security device with a single-receive capture interface
Copy gigabit traffic from a full-duplex copper link for a copper monitoring device
Copy gigabit traffic from a full-duplex copper link for a copper or optical monitoring device
The Xgig Fiber Channel Load Tester is the first generation tool with a high speed 14 Gbps Fiber Channel (16 GFC) protocol available on the market.
Trilithic 180 DSP
The 180 DSP is a signal level meter specifically tailored for installation and troubleshooting of RF signals. Featuring fast measurements and powerful troubleshooting tools, the 180 DSP comes equipped with all the tests an installer needs to measure both Analog and Digital signals and ensure the highest quality installation—and includes a price point that makes it feasible for system operators to outfit their entire fleet.
Trilithic 1G DSP
The 1G DSP conveniently combines CATV, DOCSIS 3.1 Cable Modem, Gigabit Ethernet, and Optical testing in a single meter for troubleshooting and maintenance of your entire HFC plant.
The 1G DSP with TDR conveniently combines CATV, DOCSIS 3.1 Cable Modem, and cable TDR testing in one rugged, hand-held instrument.
3550R Touch-Screen Radio Test System
The first hand-held Radio Test Set. Full radio test set functions in a lightweight hand-held platform
Trilithic 360 DSP
The 360 DSP is the first meter designed specifically to simplify Home Certifications. Built from the ground up, tailored specifically for the needs of fulfillment, this meter is ideal for standardizing processes and procedures for installation and service. The 360 DSP also includes a price point that makes it feasible for system operators to outfit their entire fleet.
3920B Series Analog and Digital Radio Test Platform
The industry standard for analog and digital radio test
VIAVI OSP has been delivering 3D depth sensing filters from the technology’s roots in the revolutionary Microsoft Xbox Kinect. Through multiple generations of increasing performance and decreasing cost, we remain the industry’s leading supplier of high performance filters for depth-sensing systems in consumer electronics.
The VIAVI 10 GigE/GigE Interface (J6873A) is a half-length, full-height PCI Express® interface card that provides full 10 gigabit capture, extensive filtering, and network key performance indicators to solve more network problems quickly.
7200B Configurable Automated Test Set
The industry’s premier instrument platform for production, depot level maintenance and field test of current and next generation radio systems
800G FLEX Module
400G QSFP-DD Test Module for the ONT-800
The 802 AWE™ is a handheld wireless network test set that is designed to help identify and resolve many problems that are encountered during Wi-Fi, ZigBee, or Bluetooth wireless network deployments.
8150 TETRA AirAnalyzer
EXCLUSIVE TETRA Network QoS Analysis, Protocol Logging and System Performance Analysis
8380 RPC
The 8380 RPC Return Path Combiner is a programmable 16 x 1 non-blocking RF matrix switch designed for use with the 8310 RSA Return Sweep Analyzer in the return path of CATV systems.
8800SX Digital Radio Test Set
Advanced Analog and Digital Radio Test Set for Bench and Field Environments
9581 SST
The 9581 SST Return Path Analyzer is the only DSP-based return path analyzer in the industry.
ACTS Software
Server application enables a proprietary connection with the Original or New DSP Family of Field Analyzers for communication and testing Packet Loss, Latency, Jitter and MOS of VoIP services.
ADS-B INTEGRITY Test Application
Performance testing of ADS-B Out equipment
ALT-8000
Versatile time-saving portable test set for testing installed FMCW and pulse radio altimeters
ALT-8015 FMCW/Military Pulse Radio Altimeter Test Set
Versatile time-saving portable test set for testing installed FMCW and military pulse radio altimeters
APM-424 MK XII/XIIA Test Sets
Fast, reliable performance testing for mission-readiness
ATC-5000NG NextGen Transponder
Prepare for Global ATC Modernization with NextGen test technology
La première solution de mesure d’OSNR « in-band » en service des réseaux DWDM avec multiplexage en polarisation.
Analyseurs de spectre optique large bande compacts pour les tests sur les systèmes CWDM, DWDM et ROADM.
Analyse du lien optique, détection des événements et défauts et affichage sous forme d’une vue simplifiée à l’aide d’icônes compréhensibles par tous les techniciens, quel que soit leur niveau d’expertise dans les tests de la fibre optique.
CERTiFi est une solution basée sur le cloud, faite pour les équipes qui conçoivent, développent, testent et certifient le câblage structuré pour les réseaux d’entreprise.
The COSA-4055 module offers the functionality and speed of an OSA in a handheld form factor at a fraction of the price of a traditional OSA. It is an ideal test tool for metro/access links and CWDM systems.
CPRIAdvisor CAP-100/CAE-100/CAM-100
CPRIAdvisor is an interference monitoring solution that increases RF visibility by performing continuous monitoring of the mobile spectrum, and allowing remote access to expedite maintenance and problem resolution.
Plugs into market leading T-BERD/MTS test instruments to create the smallest, portable 100G test solutions for both out in the field and in the central office.
CT-4
The CT-4 is a Digital Channel Tagger that is used as a system with the Seeker D Digital Leakage Detector to detect leaks in the Aeronautical and LTE frequency bands and eliminate all 'false alarm' triggers by providing proprietary dual CW carriers at two locations.
CT-X
Enjoy full-channel lineup flexibility to accommodate digital plant expansion, while greatly enhancing leak detection speed and accuracy with the VIAVI CT-X channel tagger
A CWDM OTDR test solution to deploy or maintain and troubleshoot in-service CWDM fiber networks
Offrent les fonctionnalités combinées incluant l’analyse de spectre, l’analyse de câble et d’antenne, la mesure de puissance, l’analyse d’interférence, le balayage de canaux, l’analyse RFoCPRI™, et l’analyse de signal.
CellAdvisor Cable and Antenna Analyzer is a rugged, easy-to-use, all-in-one tool with everything you need for cell site installation.
CellAdvisor RF Analyzer combines the functionality of spectrum analysis, cable and antenna analysis, and power measurements, covering all of your needs for test, acceptance, and troubleshooting of the physical layer of cellular networks.
CellAdvisor Signal Analyzer combines the functionality of spectrum analysis, DAS, and power measurements, covering all of your needs for base station troubleshooting and maintenance.
CellAdvisor 5G
VIAVI CellAdvisor 5G constitue la solution de terrain portable idéale pour valider tous les aspects du déploiement, de la maintenance et de la gestion des antennes-relais 5G.
Un appareil à la pointe de la technologie en matière de certification des réseaux optiques et cuivre.
Charms™ are printable taggants that covertly incorporate customized logos and are easily identified using a low-cost, portable microscope
ChromaFlair pigments are unique, multi-layer pigment flakes that give paints, coatings, plastics, textiles and packaging the ability to change color when viewed from different angles.
Advanced Fiber Optic Connector End Face Cleaning System
Solution intégrée « tout-en-un » d’automatisation des tests de câbles MPO par réflectométrie
Compliance Assistant
Compliance Assistant software simplifies FCC EAS compliance through automation.
CEA
The xSIGHT CEA Application enables the industry’s most effective assurance workflows via the real-time correlation of customer experience to the underlying network and service performance.
Robust and compact DOCSIS 3.1 installation and service meters for cable service providers and contractors.
dsp
The DSP TDR precisely locates cable breaks or faults to get service back online as soon as possible.
DTSS on the T-BERD/MTS-8000 platform
The portable DTSS on the T-BERD/MTS-8000 platform brings new DTSS technology to the field in a uniquely portable and high powered combination. This product can also be provided in a rack-mounted optical test unit within an OTU-8000 to be combined with ONMSi for a permanent fiber monitoring solution.
4100-Series DWDM Module
A DWDM OTDR test solution to deploy, maintain and troubleshoot in-service DWDM fiber networks
Diffractive elements are thin phase elements that operate by means of interference and diffraction to produce arbitrary distributions of light or to aid in the design of optical systems.
Allocate valuable testing and troubleshooting resources more effectively via remote PC access to the VIAVI communication analyzers
EASyCAP
A one-box solution for delivering CAP-based audio alerts with extended capabilities for broadcast radio systems.
EASyCAP
A one-box solution for delivering CAP-based audio and video alerts with extended capabilities for broadcast TV systems.
EASyCAP
A one-box solution for delivering CAP-based audio and video alerts with extended capabilities for cable TV and OTT systems.
EASyCAP
A one-box solution for delivering CAP-based audio and video alerts with extended capabilities for IPTV and OTT systems.
EASyCAP
A one-box solution for delivering CAP-based audio and video alerts with extended capabilities for international markets.
Integrated automated test facilities for testing long-term reliability of optical components while subjected to environmental stress conditions in a temperature/humidity chamber.
A next-generation service assurance solution that addresses the entire Ethernet Service deployment life cycle including test and turn-up acceptance, SLA/performance monitoring and reporting, and test and troubleshooting with both hardware and virtualized software solutions.
eCo Architect
eCo Architect is an Eclipse-based development tool that lets you create, validate, and debug SCA software components and applications. Utilizes a visual modeling language that allows developers to unambiguously express every concept of the SCA graphically. Generates behavioral and structural source code that builds for all supported operating environments. Provides a Zero-Merge functionality to simplify business logic insertion.
eCo Hub
eCo Hub implements the SCA 4.1 Core Framework (CF) that deploys, configures and controls software applications on the target embedded system platform. It supports the largest combination of operating systems, object request brokers, and processors. Not being subject to ITAR restrictions, eCo Hub is based on the knowledge and optimization techniques acquired with the former SCARI CF that runs in thousands of battlefield deployed radios from different international radio manufacturers.
eCo Inspector
eCo Inspector is an Eclipse-based run-time monitoring tool that lets you install and control applications as well as visualize the structure of the running software. The NordiaSoft eCo Inspector is an essential tool for debugging and testing during SCA development.
Laser rouge pour visualiser les défauts et vérifier la continuité des fibres optiques
Identifies optical fibers by detecting the optical signals being transmitted through a single-mode fiber.
La pince à trafic détecte facilement un signal optique sans déconnecter la fibre optique ni perturber le trafic réseau. Elle peut également servir de photomètre optique (OPM).
FVAm Benchtop Microscopes
"All-in-one" benchtop inspection and analysis solution for multifiber connectors such as MPO
La solution tout-en-un pour l’inspection des fibres optiques.
Fiberchek Sidewinder
Solution d’inspection et d’analyse portable « tout-en-un » pour connecteurs multifibre tels que les MPO.
Solution de tests IL, ORL et OTDR bidirectionnels automatiques pour l’installation, la mise en service et la maintenance des réseaux FTTx/PON, d’accès et métropolitains.
Automatic bi-directional IL, ORL and OTDR test solution for use in the installation, turn-up, and maintenance of FTTx/PON, Access and Metro and Long Haul Networks.
FiberTrace 2 et FiberCable 2 (anciennement OFS-100 et OFS-200) sont des logiciels PC de post-traitement et d’édition de rapport. Ils permettent de gérer et d’analyser les mesures optiques ainsi que de générer des rapports.
Fuel Interfaces
Fuel Interface Cables
Fusion, the cornerstone product of the vNet solution set within the VIAVI NITRO™ platform, provides software-based lifecycle management for test, service activation, performance monitoring and troubleshooting on all network layers.
GEOanalytics delivers a sophisticated API to allow third party applications to make direct use of the location intelligence, with the additional dimension of building level resolution location information.
GEOinsights unlocks the power of the location intelligence. The data feed transforms the detailed connection centric data into an anonymized, aggregated feed of insights about places, people, and time, enabling new revenue streams through data monetization.
The modular approach of GEOoptimize, deployed as a service or as a solution, meets the complexity issues operators face today by delivering automated network performance optimization harnessing the power of geo-located subscriber-centric intelligence.
NITRO GEO GEOperformance, powered by the Network Integrated Test, Real-time analytics and Optimization (NITRO) intelligence platform, uses location intelligence to transform RAN planning and performance engineering by increasing operational efficiency, and significantly increasing return on investment, while delivering game changing improvements in the network performance actually experienced by customers.
GPSG1000
High-end test capability ideal for validating the performance of GPS enabled devices
Advanced handhelds display systems that integrate fiber inspection and testing into a single portable solution.
Premier triple –play access network tester installs and maintains copper and fiber based bonded ADSL/VDSL, IPTV, Microsoft TV, VoIP and data plus legacy networks.
The VIAVI Solutions® Hi-Res Multimode OTDR solution has been designed to characterize and locate faults on very short multimode fiber runs deployed in aircraft, spacecraft, submarines, and ships.
High-Density Optical nTAP
With several options available, you can scale up to 24 modules in one unit of rack with the High-Density Optical TAP.
Tighten up the home coaxial network with this kit, finding leaks using the technician's (DSP or ONX) signal level meter.
The I-Stop reverse test probe is a test accessory you can use with signal level meters and/or analyzers for bi-directional measurements with no risk of power damage.
IFF-45TS
Provides RF signal generation and parametric measurement of MK XIIA and TACAN equipment
IFF-7300S Series IFF/Crypto/TACAN Automated Test System
For military transponders, interrogators, cryptos and TACAN transceivers
IFR 4000 Nav/Comm Flightline Test Set
Equips the maintenance technician with the most portable nav/comm ramp test set on the market today
IFR6000 Transponder/DME/TCAS Flight Line Test Set
Industry standard test solution for installed systems
Supports military IFF transponder modes and TACAN
16x1 5-1000 MHz, 75 Ohm, RF input switch controlled by the RSAM to provide monitoring at up to 128 different test points.
An easy-to-use solution that allows users to quickly locate an interference source by following guidance on a tablet-based map application.
JMEP is a powerful micro Ethernet probe for Ethernet and IP performance assurance.
LAW
LAW, coupled with the Seeker family of leakage detectors, provides a management system that maximizes the effectiveness and return on investment of leakage systems.
VIAVI OSP has a rightful claim to mastery. Since 1948, we have continued to pioneer the development of advanced optical coating technologies.
As technology companies and auto makers add new functionality to make cars more automated, LiDAR (Light Detection and Ranging) systems play an important role in ensuring that cars accurately sense and react to the environment around them.
VIAVI OSP has a rightful claim to mastery. Since 1948, we have continued to pioneer the development of advanced optical coating technologies.
VIAVI OSP has a rightful claim to mastery. Since 1948, we have continued to pioneer the development of advanced optical coating technologies.
Module offrant une sortie d’émission spontanée amplifiée (ASE) qui se caractérise par une haute densité de puissance aplanie dans la bande C. Il assure également une grande stabilité spectrale.
Six configurations différentes disponibles : pré-amplificateur, amplificateur, amplificateur haute puissance, amplificateur avec accès en plein câble, en ligne et DWDM. Faible bruit, haute puissance de sortie et gain élevé.
The MAP-200 general purpose light sources (mSRC-C2) are fiber-coupled, fixed-wavelength emitters that cover key Telecom/Datacom wavelength bands of 850, 1300, 1310, 1490, 1550, and 1625 nm.
​The MAP-based integrated multi-wavelength meter and high resolution optical spectrum analyzer module combines sub-GHz resolution performance and compact modularity in a single slot cassette.
The Multiple Application Platform (MAP) multiport tunable filter module (mTFX-C1) dramatically simplifies test signal management for next-generation 100 G+ interfaces, sub-systems, and system test.
Single-channel, polarization-independent semiconductor optical amplifier (SOA)
Optical Switch Solutions built on the industry-leading, fourth-generation instrumentation class of VIAVI optical switch technology.
Singlemode Insertion Loss / Return Loss test meter and fully EF-compliant multimode Insertion Loss test modules for use with the VIAVI advanced MAP-200 platform.
map-200-passive-utility-module
The MAP-200 Utility Module, mUTL-C1, provides a range of passive optical devices such as couplers, splitters, Mux/Demux modules and band-pass filters to simplify the integration of these devices into automated test systems
Module à détecteur InGaAs de 3 mm offrant une gamme de mesure de 10 à - 80 dBm (800 à 1650 nm).
The MAP-200 Polarization Control Module (mPCX-C1) provides polarization scrambling, control and stabilization for use in applications such as temporal depolarization, 100G+ coherent interface testing as well as stabilization and tracking of target SOP conditions
Test solution for manufacturing and new device development of passive DWDM devices, ROADMs & Circuit Packs. Provides full characterization of wavelength dependence performance.
MAP Series Tunable Distributed Bragg Reflector (DBR) laser (mTLG-C2) is a new-generation tunable laser that is ideal for DWDM testing where the capability to change wavelength on demand over the C- band with 50 GHz spacing is essential.
High-resolution, wide wavelength-range attenuator ideal for use in applications such as analog systems and high bit-rate digital systems.
Optical test and measurement platform optimized for cost-effective development and manufacturing of optical transmission network elements.
MAP-2100
The one tool data center operators need to remotely test transmission quality of the network connecting its data centers, central offices, or head ends.
Provides a flexible, more cost-effective compact platform for optical test switching and signal conditioning in optical device and sub-system development and manufacturing.
Multiple Application Platform (MAP-300)
Third Generation optical test and measurement system that is optimized for compact cost-effective development and manufacturing of optical communications technology.
MCV-1
Mobile calibration verification unit that is used as a signal source for checking the calibration of both the Original and New DSP Family of Field Analyzers as well as most typical field analyzers.
MP-60/-80
Mesure la puissance optique à l’aide d’une connexion USB 2.0 à un PC, ordinateur portable ou appareil mobile. Permet ainsi le traitement numérique des mesures de puissance optique à l'aide des logiciels VIAVI FiberChekPRO ou FiberChekMOBILE.
Le testeur de réseau portatif MTS 5800-100G est le seul outil dont les techniciens réseau et les ingénieurs ont besoin pour l’installation et la maintenance de leurs réseaux. Il est compatible avec les anciennes et nouvelles technologies afin de gérer les applications réseau, y compris les applications de test des installations métropolitaines/principales, des interconnexions entre les datacenters et des services aux entreprises.
T-BERD/MTS-2000
Équipement de test portable dédié à l’installation, la mise en service et le dépannage des réseaux fibre optique.
Solution « tout-en-un » intégrant deux modules permettant l’automatisation des tests et certification des réseaux optiques.
Ce testeur, qui est le plus petit du marché, peut effectuer des tests tout au long du cycle de vie du réseau, tels que la caractérisation de la fibre, l’activation du service, le dépannage et la maintenance.
Plateforme modulaire multifonction pour les tests d’interface réseau et de fibre optique
Medusa Labs Test Tools Suite is leading application-based data testing and signal integrity testing tool enabling developers to identify, locate, and resolve elusive errors through stress testing before products are released to market.
MicroNIR OnSite-W Probe With Tablet
The MicroNIR™ OnSite is a compact, ruggedized and ergonomic design making it ideal for applications in the field or on the manufacturing floor. MicroNIR OnSite is controlled by tablet PC based software with intuitive user interface which requires minimum training to operate.
The MicroNIR™ PAT-U is a USB-powered rugged NIR spectrometer. It is the smallest of its kind on the market making it suitable for use on equipment of different sizes as well as implementation of multiple of the analyzers on a given process.
The MicroNIR™ PAT-W is a battery-powered rugged NIR spectrometer equipped with WiFi connectivity for data communication making it suitable for use on rotating blenders as well as other stationary process equipment.
The MicroNIR™ Pro is an excellent development tool for a new user assessing the feasibility of NIR spectroscopy for their applications. The product is offered with a number of accessories that allow for ease of use in an at-line or laboratory setting.
MicroNIR Onsite
The MicroNIR™ Tablet Probe was specifically designed for the rapid analysis of individual pharmaceutical tablets & pills, single grain kernels & seeds, and similar material types. In addition to these samples, the Tablet Probe can also be used for the analysis of powders contained in plastic bags in both large and small volumes.
Mission Test
Is your radio mission ready?
AXIe - Modular Instrumentation
We are pleased to announce its new modular line of products based upon the latest AXIe standard. The new AXIe chassis is the world’s first to support both the Wide PCI Express Extensions for AXIe and PCIe Gen3 backplane data rates, making it the test and measurement industry’s highest-throughput modular chassis.
Industry’s most compact 10 GigE multifunction tester for the installation and maintenance of carrier-grade Ethernet and Internet Protocol services.
NEON Signal Mapper
Signal mapping to provide complete critical in-building coverage. VIAVI Solutions and TRX Systems are providing a new joint solution that integrates TRX’s NEON Signal Mapper Application with the VIAVI 3550R and the 8800SX Radio Test Sets.
The heart of the VIAVI Location Intelligence solution is the NITRO Mobile platform, which connects to the Network OSS to collect customer generated trace data. Using patented methods the billions of events per day are geolocated, analyzed and loaded into the intelligence store.
Provides performance management capabilities including data collection, correlation, analytics and reporting enabling service providers to proactively identify faults, troubleshoot and resolve problems and perform trend analysis and capacity planning.
Centralized Ethernet turn-up test and troubleshooting tool for Service Activation of Business Ethernet and Mobile Backhaul applications.
Network & Service Companion (NSC-100)
Un instrument compact pour les techniciens et sous-traitants chargés de l’installation, de l’activation et du dépannage de réseaux résidentiels haut-débit, de services aux entreprises et de services Ethernet métropolitains/d’entreprise. Fournir une analyse comparative de réseau, valider des performances de services et distribution, tout en favorisant le respect des bonnes pratiques permettant de tout tester, partout et simplement
OCC-4056C DWDM Optical Channel Checker Module
The OCC-4056C module offers the functionality and speed of an OSA in a handheld form factor at a fraction of the price of a traditional OSA. It is an ideal test tool for metro/access links and DWDM systems.
Système de test et de surveillance des réseaux optiques backbones, métropolitains, d’accès et FTTH.
The 400G CFP8 Module is a scalable test solution based on the latest standard for 400G and 200G Ethernet (IEEE 802.3 bs) and ready for OTUCn. It boasts a CFP8 slot to host the first-generation 400G pluggables, support for upcoming QSFP-DD and OSFP available via adapters. FlexE and FlexO applications are addressed via 5 QSFP28 slots.
ONT-600 FlexE
Software Option for ONT-600 QFLEX, CFP8 QFLEX Data and CFP8 PHY Module
The MTM provides high density 155M to 11.3G testing at layers 1 through 3. Concurrent users can control a broad protocol range including OTN, GigE/10GigE LAN, SONET/SDH, and Fiber Channel.
The VIAVI ONT N-PORT module is a 4-port solution for test and system verification of 100G-class products. It supports four native, fully independent QSFP28 or SFP28 ports. Test applications include Ethernet, OTN, and Fiber Channel.
The CFP and CFP2 Test Modules support testing and verification of new high-speed network elements for 25GE, 40GE, OTU3, 50GE,100GE and OTU4. They enable the development of 100G class products based on CFP and CFP2 technologies. CFP4 and QSFP28 support is available via adapters.
800G FLEX Module
Highly configurable, multi-protocol, multi-port test platform for R&D and system verification of optical transport ICs, modules, and systems
Full range of optical spectrum analyzers for spectral measurements in CWDM, DWDM, and ROADM testing-based systems, providing true OSNR measurements based on the unique VIAVI in-band OSNR method.
High resolution OSA with lab performance in a field-ready tester for spectral analysis of 10/40/100 and 400 G DWDM networks.
Permet de communiquer via la fibre lorsqu'aucun réseau GSM n'est disponible.
Automatisez la surveillance des réseaux optiques avec l’unité de test OTDR à distance sur rack la plus compacte du marché.
OTU-8000 Optical Test Unit
Automatisez la surveillance de vos réseaux optiques grâce à une unité de test modulaire et montée sur rack compatible avec une large gamme de modules OTDR pour des mesures de réflectométrie traditionnelles ou des mesures de répartition de la température et de la contrainte (DTS et DTSS).
OVF-1 Visual Fault Locator
Pour la localisation des défauts dans les réseaux optiques
Observer Analyzer
Optimisation des Performances. Réduction des Temps d'Interruption de Services. Observer Analyzer comprend les environnements virtuels (VM) complexes et gère les déploiements de Communications Unifiées, les performances du réseau, des applications et bien plus encore.
Observer Apex intègre les scores d’utilisateurs finaux, la clarté de la géolocalisation des sites et des processus de résolution en trois étapes. Il fournit ainsi les données de suivi des performances dont les équipes informatiques ont besoin pour atteindre des objectifs de service optimaux.
Observer GigaFlow transforme l’analyse des flux en combinant différentes sources de données relatives au trafic et à l’infrastructure, permettant ainsi une gestion des performances plus en profondeur et fournissant des données détaillées au niveau de la sécurité du réseau
Le meilleur dispositif d’analyse et de capture des paquets du marché garantit la disponibilité de chaque conversation réseau pour la recherche de panne et les enquêtes technico-légales approfondies.
Fusionner deux flux de données en un seul, de manière totalement transparente.
Easily send Ethernet traffic from a full-duplex copper link to a copper monitoring device with Observer Copper TAPs.
With several options available, you can scale up to 24 modules in one unit of rack with the High-Density Optical TAP (HDOT).
Copy traffic from a full-duplex copper link and send it to a copper or optical monitoring device – also available with aggregation functionality.
High-Density Optical nTAP
nTAPs are passive, full-duplex devices, offering complete visibility to monitoring devices regardless of traffic level. They work with the leading management tools for quick and easy deployment. nTAPs are transparent for monitoring critical links, and provide continuous network data flow even if power fails. nTAPs are scalable, modularized, space efficient, and economical.
Solution SaaS souple et rapide à déployer, ObserverLIVE permet aux équipes de surmonter les obstacles potentiellement associés aux environnements informatiques hybrides, tout en exploitant intégralement sa valeur commerciale.
Copy traffic from one full-duplex optical link for one optical monitoring device
L’outil d’analyse des signaux OneExpert CATV permet de vérifier la performance des réseaux et rend le dépannage plus simple, plus rapide et plus efficace.
OneExpert ONX-220
Fast, simple, versatile, and affordable, the ONX-220 is a powerful installation/service meter.
Copy traffic from one full-duplex optical link to one optical monitoring device
Integrated fiber characterization and dispersion test solution combining PMD, CD, and AP measurements to characterize high speed networks.
Copy traffic from one full-duplex optical link to one copper monitoring device
Copy traffic from one full-duplex optical link to one copper monitoring device
Sonde d’inspection et d’analyse automatique des connecteurs optiques, compatible avec PC, ordinateurs portables, smartphones, tablettes et plates-formes de test VIAVI.
Fast, cost-effective and accurate polarization mode dispersion (PMD) testing for high speed network characterization.
A fuel tester that makes a powerful difference in line and hangar maintenance
PSD90-1C AC/DC Fuel Capacitance Test Set
Technologically advanced test set, providing multiple functions for calibration and troubleshooting
VIAVI OSP has a rightful claim to mastery. Since 1948, we have continued to pioneer the development of advanced optical coating technologies.
Polatis Optical Matrix Switches
The Polatis range of optical matrix switches provide versatility in optical switching applications
Enables fully automated service activation and verification for Carrier Ethernet applications including Business Services and Mobile Backhaul.
RGS-2000NG TCAS Test Set
Designed for engineering development, design validation, manufacturing and return-to-service TCAS testing
RSVP²
RSVP² for reverse path testing is designed specifically with the CATV installer in mind.
OTDR Modules – 4100-Series for T-BERD/MTS-2000, -4000 V2, -5800 Platforms
Solution de tests OTDR pour l’installation, la mise en service et la maintenance des réseaux d’entreprise, FTTx/PON, d’accès, métropolitains et longue distance.
Gamme de modules OTDR (Réflectomètre optique) pour l'installation, la mise en service et la maintenance des réseaux d'entreprise, FTTx, d'accès, métropolitains, très longue et ultra longue distance.
High-performance solution for 2, 2.5, 3 and 4G system verification, troubleshooting, and RAN optimization. Its intelligent call trace-centric approach supports the evolution of CDMA, including CDMA One and CDMA2000.
High-performance solution for 2, 2.5, 3 and 4G system verification, troubleshooting and RAN optimization. Its intelligent call trace-centric approach supports the evolution of GSM including EDGE, GPRS, EGPRS and UMTS.
High-performance solution for 2, 2.5, 3 and 4G system verification, troubleshooting, and RAN optimization. Specific benefits for IMS include advanced decodes, powerful call traces and efficient signaling analysis.
The VIAVI Signaling Analyzer Real Time is the test industry’s most complete, end-to-end analysis and troubleshooting solution for LTE networks, providing comprehensive monitoring and network diagnostics.
The VIAVI Signaling Analyzer Real Time (SART) is a high-performance solution for 2, 2.5, 3 and 4G system verification, troubleshooting, and RAN optimization. Its intelligent call trace-centric approach supports the evolution of SS7.
The VIAVI Signaling Analyzer platform accelerates development and deployment of 3G UMTS networks, helps customers perform verification, troubleshooting, and RAN optimization of ATM-Based UTRAN and migrate their networks to IP UTRAN architectures.
Wireless Innovation Forum (WInnF) APIs
A primary objective of the Software Communications Architecture (SCA) is to enhance waveform application portability across different hardware platforms executing different Operating Environments (OEs). The aim is to write business logic that can be easily ported from one platform to another.
The headend/hub rack-mounted SCU-1800 provides non-interfering downstream sweep to 1.218 GHz and upstream sweep to 204 MHz on up to 16 ports.
SST Configure
This is the SST Configure software for the 9581 SST R3, 9581 SST R4, & 9581 SST R5 Return Path Analyzers.
Salus K12 EMS
Comprehensive Event Response from a Single Click, Anywhere
SecureShift inks provide an overt color-shifting appearance that enhances security through easy visual verification.
Seeker & MCA III
Seeker with MCA III is a GPS-based leakage management and CATV leak detection system for documentation and troubleshooting.
Seeker D & MCA III
Seeker D with MCA III is a GPS-based leakage management and CATV leak detection system with a dual-band leakage detector capable of monitoring leakage within the aeronautical band or the near-LTE band in a complete digital system.
Seeker D Lite
The Seeker D Lite is a dual-mode and dual-frequency in-home leakage detector that accurately monitors leakage in all digital systems or in mixed digital and analog systems. The Seeker D Lite works with both the CT-4 Channel Tagger in the headend or the Seeker D Lite Source Transmitter in the field.
Seeker HL
The Seeker HL In-Home Leakage Evaluation System is a low-cost digital leakage solution that includes a dual-frequency tagged signal source, with a selectable output level and a discriminating leakage receiver that is designed to be extremely sensitive to leakage in both the Aeronautical and LTE Frequency Bands.
Seeker Setup
This is the Seeker Setup configuration software for the Seeker Product Family of Leakage Detectors.
Seeker X
Fully frequency-agile connected solution to quickly and accurately find network shielding weaknesses regardless of channel lineup or plant architecture in use.
Grâce à la navigation aisée de l’interface utilisateur du serveur de gestion Observer, il devient facile d’effectuer des authentifications, de vérifier l’accès et les mots de passe des utilisateurs, d’administrer les mises à niveau et de rationaliser la gestion depuis un emplacement centralisé unique.
The VIAVI Signaling Analyzer Real Time (SART) is a high-performance wireless test solution for 2, 2.5, 3 and 4G system verification, troubleshooting, and RAN optimization.
Single Fiber Insertion Loss & Return Loss System
PCT-rm is a MAP-220 based Insertion Loss (IL) and Return Loss (RL) solution targeting single fiber connector applications in the lab and in manufacturing.
VIAVI small cell solution including NetComplete EtherASSURE and PacketPortal Intelligent Network Visibility and Ethernet Assurance Microprobes.
Solution for problematic coax home wiring reduces repeat calls and improves customer experience.
SmartClass Fiber MPOLx MPO Optical Loss Test Sets
Le SmartClass Fiber MPOLx de VIAVI Solutions est le premier kit de test de perte optique capable d’effectuer les tests pour la certification de niveau 1 des connecteurs MPO.
Optical power meters for the installation and maintenance of singlemode and multimode fiber optic networks. Combine pass/fail fiber inspection and optical power measurement into one solution.
With a 100 dB dynamic range, the OLP-85 and -85P optical power meters are perfect for any fiber-optic network power or loss test application.
Le photomètre OLP-87 PON permet des mesures simultanées de toutes les longueurs d’onde montantes et descendantes sur les réseaux B/E/G-PON opérationnels. Il est également compatible avec les réseaux PON nouvelle génération (XG(S)-PON, 10G EPON et NG-PON2).
Le testeur OLP-88 TruePON est un outil innovant qui utilise la technologie d’analyse des données GPON. C’est l’outil idéal pour les techniciens d’intervention gérant l’activation de service des réseaux GPON, ainsi que pour les équipes de support chargées de résoudre les plaintes liées au service et d’identifier les causes des problèmes.
La source optique OLS-85 est le complément idéal du photomètre SmartClass Fiber OLP-85/-85P pour la réalisation de tests automatiques de perte d'insertion.
La solution la plus rapide et la plus facile à utiliser pour la certification de fibre optique de niveau 1
The SmartClass Fiber ORL-85 combine optical power meter (OPM), light source (OLS), continuous wave return loss meter (OCWR), and connector inspection in one compact instrument.
Compact, low-cost test solution for installation, maintenance, and upgrades of CWDM & DWDM networks.
Atténuateurs portatifs compacts et résistants utilisables sur le terrain ou en laboratoire
All-in-one tool for broadband services installation, including copper, ADSL 1/2/2+, WiFi, coax, HPNA, fiber, IP data, VoIP, and IP video testing.
SmartClass 4800
Optimisé pour les équipes d’installation des services aux entreprises, le SmartClass 4800 est un outil ultra rapide et moderne permettant de s’assurer que les services de voix et de données atteignent les indicateurs clés de performance (ICP) attendus.
Le SmartOTDR, un réflectomètre léger et compact, permet de tester les réseaux optiques d’accès et métropolitains. Il possède une interface que tout technicien, même novice, est en mesure d'utiliser.
Le SmartOTU est une solution de surveillance des réseaux fibre optique capable de détecter et localiser automatiquement toute anomalie.
Une gamme de mesureurs de puissance optique de poche à bas prix pour l’installation et la maintenance des réseaux à fibres optiques monomodes et multimodes.
Photomètre optique pour les tests des signaux descendants et des voies de retour des systèmes RFoG et PON.
Une gamme de sources optiques compactes et économiques pour l’installation et la maintenance des réseaux à fibre optique monomodes et multimodes.
Inclut une source optique (OLS-3x), un photomètre (OLP-3x) et des accessoires supplémentaires.
SpectraFlair pigment is a multi-layer thin-film flake comprised of magnesium fluoride and aluminum. Precisely controlling the thickness and relief of the pigment’s flake structure produces the diffractive effect characteristic of SpectraFlair pigment.
There is a fascinating world to be seen beyond the range of human vision. Hyperspectral imaging – seeing beyond the visible spectrum with much more color detail – allows us to explore the invisible world that surrounds us.
Logiciel d'analyse avancée pour éditer des rapports, imprimer et archiver les résultats de mesure.
StrataSync est une solution hébergée sur le cloud permettant de gérer les parcs d'instruments de mesure VIAVI, leur configuration et les données de test et de garantir que la dernière version de logiciel et les options les plus récentes sont installées.
PathTrak offre des capacités supérieures d’analyse de spectre et de QAM qui permettent une surveillance et une recherche de panne particulièrement efficaces. Désormais entièrement pris en charge par le logiciel XPERTrak, PathTrak est un élément à part entière de la gamme de produits de maintenance, de surveillance et de recherche de panne HFC de VIAVI.
Delivers all the test capabilities technicians and engineers need to install and maintain high-capacity networks
The T-BERD/MTS-8000 is the world’s most scalable test platform for next generation high speed network deployment (40G and 100G). It’s a multi-application platform with physical, optical and Transport / Ethernet testing capabilities.
The field-optimized Timing Extension Module (TEM) helps network operators maintain precise synchronization by delivering industry-leading accuracy to field portable timing and synchronization measurements.
The TM500 Test Mobile family is in use with almost every base station manufacturer across the world, and can be regarded as the de facto standard for network testing via RF.
Solution permettant aux câblo-opérateurs d'accroître la satisfaction de leurs clients en utilisant des procédures de test automatisées et personnalisées pour réduire considérablement les interventions et augmenter la productivité .
Software for maintaining and optimizing DSAM meters; provides Field Data Management, Meter Browser Management, and DSAM Remote Access.
WorkFlow automation software for the JDSU HST-3000 Handheld Services Tester.
TeraVM
TeraVM is an application emulation and security performance solution, delivering comprehensive test coverage for application services, wired and wireless networks.
TeraVM – 5G Core Emulator
One of the biggest challenges facing NEMs and mobile operators as they launch 5G is developing products against constantly changing and maturing 3GPP specs.
TeraVM 5G
The VIAVI TeraVM 5G Core Test provides a full wraparound validation of a 5G Standalone Core Network.
Delivering a fully virtualized application and security validation solution to test and secure devices, networks and their services
The founding principle of TeraVM is it’s a software only solution. TeraVM enables an elastic test bed which can be used to deliver software defined testing with reliable and repeatable results. TeraVM is agnostic to the hypervisors/hardware platforms on which the public clouds such as Amazon Web Services, Microsoft Azure, or indeed private cloud platforms of OpenStack or OpenMano are built upon.
Offre à chaque fois des résultats haute performance lors du déploiement de services haut débit au domicile des abonnés.
Copy traffic from three full-duplex optical links for three optical monitoring devices
Test de débit sous forme de fonction de réseau virtuel, basé sur RFC 6349.
Copy traffic from two full-duplex optical links for two optical monitoring devices
UC-584 Series Transponder Antenna Coupler
Providing repeatable test results on the ramp or in the hangar
Permet aux techniciens d'installer et de dépanner correctement les circuits VDSL2 et ADSL2+ cuivre à paires uniques et liées -- aux deux extrémités grâce à UltraFED IIB.
The VSA-RF100 integrates both RF and MPEG analysis to quickly identify and troubleshoot customer-affecting issues down to the individual program level.
The VSE-1100 is the industry’s first converged digital spectrum video analyzer and noise-troubleshooting platform designed for the challenges of the converged cable access platform (CCAP) and remote PHY evolution.
The industry’s only software-based solution that monitors operators’ video services end-to-end from the video source to the end device with active and passive testing.
The Wander Analysis Software is an advanced synchronization evaluation tool with the ability to import and analyze TIE data.
Le premier analyseur de réseaux LAN sans fil/WiFi conçu pour les installateurs de tous niveaux, dont les fonctionnalités intuitives permettent la caractérisation, l’optimisation et le dépannage rapides des réseaux WiFi domestiques.
XPERTrak
There are many systems available today to turn dashboard indicators red, but only XPERTrak™ also gives you the insight and tools to help you turn them green.
The Delay Emulator simplifies test setup and configuration and provides developers with a suite of powerful yet flexible capabilities to accurately emulate a variety of real world operating conditions.
Comprehensive multiprotocol analysis, load testing, and error injection for all SAN/NAS technologies.
Xgig 1000 24 Gbps SAS Solution
Fully integrated, stand-alone system with 24/12/6/3 Gbps SAS multi-functions (Analyzer and Jammer)
Extensive Xgig capabilities and flexibility provide unmatched network visibility to more easily identify and resolve problems, accelerate new product design, and speed time-to-market.
The most powerful PCIe and NVMe analysis system available, offering complete visibility into traffic flows with advanced trace and analysis capabilities.
The Xgig 10GbE and Fiber Channel Analyzer is a versatile, state-of-art solution for monitoring and analyzing live traffic of different storage protocols, including 10G Fiber Channel, 10GbE, iSCSI, FCIP, iFCP and iWARP.
Fully integrated, stand-alone system with 12/6/3 Gbps SAS multi-functions (Analyzer, Generator, Jammer)
XGIG 4K PCIe 4.0 Platform
The most powerful PCIe Gen 4.0 analysis system available, offering complete visibility into traffic flows with advanced trace and analysis and jamming capabilities.
The Xgig SAS/SATA analyzer is a critically-important tool for engineers developing and troubleshooting products and systems that involve the SAS/SATA protocols.
The powerful Traffic Generator extends the capabilities of the Xgig Analysis and Test Platform to create network traffic at line rate to stress test equipment during development and in-network.
The Xgig 8G Fiber Channel Analyzer offers a wide array of advanced analysis capabilities to enable users to achieve more robust product performance without sacrificing time-to-market.
Expert software comes standard with all Xgig Analyzers to provide a unique and robust set of debugging and analysis capabilities specifically designed to accelerate and simplify device development and troubleshooting.
The Xgig BERT solution simplifies signal integrity verification and high-speed bit error measurements by injecting data patterns into the traffic stream that create worst-case data loading conditions and stress a network's physical layer to its limits.
The Xgig Load Tester quickly and easily verifies data integrity, monitors network performance, and identifies a wide range of sophisticated problems across complex network topologies that would be too difficult to troubleshoot with an analyzer alone.
Xgig, designed for heavy-duty data traffic and complicated network structures, offers the industry a reliable analysis tool for high-bandwidth protocols such as GbE and iSCSI.Xgig® GbE/iSCSI Analyzer
The Xgig® Jammer manipulates live network traffic to simulate errors in real time, enabling users to verify the responsiveness and robustness of error recovery processes.
The xSIGHT Session Trace Application provides industry-recognized transaction tracing and decoding troubleshooting functionality much faster and at a lower cost than traditional solutions.
 xSIGHT Traffic Analysis Agent
Traffic Analysis Agents deliver Control and User Plane metrics in real-time via the xSIGHT Mediation component to xSIGHT or third-party monitoring apps.
Dexter Pham Jamie Owmbey
xSIGHT Traffic Storage Agents deliver Control and User Plane metrics in real-time to monitoring applications, plus store KPIs and Control Plane traffic for troubleshooting applications.