MAP 多端口可调滤波器模块 (mTFX)

用于 MAP 系列平台的 100G+ 波长管理滤波器 LightDirect 模块

多应用平台 (MAP) 多端口可调滤波器模块 (mTFX-C1) 可大幅简化下一代 100G+ 接口、子系统和系统测试的测试信号管理。

mTFX-C2
mTFX-C2

mTFX 是一种模块化的以太网或 GPIB 仪器,可直接通过基于 PC 的自动化系统进行管理。有了它,就无需重新部署光网络技术,或使用带有专用接口卡的复合库。

mTFX 基于下一代硅基液晶 (LCOS) 技术打造,远远不止是一台可调滤波器。它集可变衰减器、交换机、功率计和 DWDM 复用器功能于一体,大大简化了相干接口、放大器和 DWDM 系统的光电子测试。利用 TrueFlex™ 技术,滤波器在中心波长和带宽处连续可调,并且未锁定到 ITU 网格。可以创建多个并行波长通道而不会中断已建立的连接 — 全部都达到 Sub-GHz 分辨率。行业领先的损耗和带外抑制规范可确保对测试信号的削弱保持最小程度。

使用 mTFX,可以快速让具有正确功率的正确波长进入正确的测试端口 – 并可以使用简单直观的 GUI 和/或基于 SCPI 的远程命令灵活地隔离、修整、管理和传送任何波长或一组波长。

特点

  • 可调滤波器,带宽可在 16 至 5100 GHz 的范围内进行调整,分辨率为 0.5 GHz
  • 低损耗 (<5.5 dB),连续的扩展 C 波段覆盖范围,波长精度为 ±3.5 GHz
  • 多达 120 个(对于 L 波段)和 180 个(对于 C 波段)独立滤波器,每个滤波器都有独立的衰减和输出端口分配
  • 可添加和移除新滤波器,而不会干扰现有连接
  • 具备自动单峰值和多峰值查找算法的内部功率计选件
  • 自动化峰值跟踪功能,不会造成传输功率损耗
  • 快速、简单的滤波器生成图形用户界面和 SCPI 控制界面
  • 可选的软件许可证可启用最多 8 个输出端口
  • C 波段在单插槽模块盒中提供,L 波段在双插槽模块盒中提供

应用

  • 光电子通信测试自动化
  • 100G+ 相干接口测试
  • ROADM 节点仿真
  • DWDM 系统测试期间的信号提取或插入
  • 放大器增益频谱管理和负载音频生成
  • OSNR 测量

服务

Instrument Care Support Plans

Save up the 50% of standard service prices and obtain priority service when you buy a bundled plan at the same time the instrument is purchased. Care Support Plans offer the best way to purchase extended warranty, premium technical support, self-paced training, and critical maintenance services like calibration services that include software and engineering change order update services to ensure your product is maintained with current software and a calibration certificate. These discounted plans are 2-5 years long when purchased upfront with your VIAVI instruments.


VIAVI Care 支持

服务BronzeCareSilverCareMaxCareGoldCareFleetCare
 BronzeCareSilverCareMaxCareGoldCareFleetCare
技术支持高级版高级版高级版高级版高级版
工厂维修

标准服务 + 定制菜单:
 现场校准和培训,FAE 天数,
自定义工程或软件订阅

优先服务
自定进度的培训

5 年电池和包覆盖 *

 
工厂校准 

配件覆盖

  
备机借用  
* 仅限 5 年计划;如果适用

电池/包覆盖
电池和包会随着日常使用和充电周期而磨损。为了确保这些项目不会拖累您,我们的 5 年计划包括在您的 5 年计划的整个生命周期内进行更换。

在为期 5 年的 SilverCare 或 MaxCare 支持计划期间,VIAVI 将提供一次更换损坏的电池和磨损的软包/手套的服务。只有当仪器被送回 VIAVI 进行维修或校准服务时,才会更换该仪器。硬箱排除在外,覆盖不适用于不带包/电池销售的仪器。

此覆盖包括在 5 年 Silver 和 MaxCare 计划中

MaxCare 配件更换覆盖
仪器产品配有配件电缆和连接器端子。为了确保可靠、准确的测试,我们将每年更换一个配件,以确保良好的测试结果。

当配件被确定为有缺陷或有故障时,VIAVI 将免费为客户修理配件或根据 VIAVI 的判断进行更换。更换的配件可能是新的,也可能是翻新的。所有退回的配件归 VIAVI 所有。适用以下限制:每 12 个月内可更换的配件最多为一个;适用的配件仅包括那些被认为对仪器运行至关重要且随原始购买产品一起发货的附件。如果存在问题,或者在校准或维修服务事件期间,客户有责任将有故障的附件寄回 VIAVI。

备机借用
现在您无需停机便可安排校准或维修。备机借用服务可在您将设备送去校准或进行突发性检修时向您出借类似配置的设备。


Care 支持计划 - MAP

Care Support Plan - MAP

产品类型推荐计划BronzeCare
BronzeCare
SilverCare
SilverCare
MaxCare
MaxCare
为什么要校准?
MAP (Mainframe/Module)Bronze-3

为什么要校准这个产品?
有哪些常见问题?

Factory standards to ensure accuracy MAP

Why calibrate this product?

It is essential in manufacturing environment to ensure your product meets the published/customer requirements. Having accurate measurements ensures highest possible yields whilst maintaining product specifications. Ensuring all that the optical test equipment is performing as designed and calibrated is requirement in achieving that goal.

Viavi will validate measurement accuracies conform to published specifications.

Maintain connectors and pigtails.

Factory standards to ensure accuracy

VIAVI is a TL9000 company and calibrates this instrument based on general requirements for the competence of calibration and testing laboratories (ISO/IEC 17025:2005) to ensure your instrument is certified to measure accurately. Instruments that are out of calibration will produce unreliable measurements and can create false passing or false failing test results that often cause your team repeat work. We maintain, polish and clean all fiber connectors, fix pigtail connections that are internal to the product to ensure all parts stay in good working order and upgrade software / firmware to the latest approved release to enable enhancements. VIAVI Care Plans are the most cost-effective way to plan for calibration with a low, discounted price at the time of instrument purchase.  Fixed rate calibration can also be purchased later via a separate purchase order.

  • Ensure accurate measurements that meet design expectations and optical budgets.
  • Maintain ports and connectors to keep signals working properly and to extend the life of the instrument. For example, if optical connectors or lasers are bad or interface ports are loose then after repeated connection cycles, optical measurements may be inaccurate or damage may occur.
  • When manufacturing optical network products, accurate, reliable and repeatable optical measurement performance is essential to compliance with published/committed product specifications
  • Know that optical product design, product manufacturing and customer expectations are accurate and in alignment throughout product lifecycle

Most business common implications MAP

How will my measurements be affected if the product is out of calibration?

Inaccurate measurements may prevent verification of power levels or introduce other measurement uncertainties, errors and artifacts. Out-of-calibration instruments can result in design errors, production problems, end customer escalations, increased failure rates, audit non-compliance or even ultimately loss of business. 

What are the most common implications of these issues to the business?

  • Uncalibrated tools produce unreliable measurement results that can't be certified to specifications and may violate product agreements or ISO/TL9000 standards with your customers and their network equipment vendors.

  • Design errors resulting from inaccurate measurements can result in ongoing issues throughout the product lifecycle including poor yields, inaccurate optical budgets, increased return rates  and customer expectation mismatch.

  • Production costs can be elevated by increased re-work, reduced yield and inconsistencies between measurements.

Common Business impacts include:

  • Lost revenue, customer complaints and increased costs.
  • Quality audit failures.
  • For end customers, repeat product quality issues with vendors often cause added cost, customer dissatisfaction and loss of business.

 


VIAVI Care Support for Existing Equipment

FleetCare
FleetCare

FleetCare plans can be customized to include any service entitlements on your fleet of existing equipment. Please fill out a Service Contracts form for a quote.

  • Any collection instruments with a single coterminous renewal date
  • Each contract is customized with any number of annual terms required by the customer
  • Onsite Calibration, Training, Field Application Engineer days can be added

View Support Plans For Existing Equipment


Repair and Calibration

Our products live in rugged environments for over 10 years with 1000s of test connect/disconnect cycles.  We will be there to support you to ensure components that require maintenance like connectors, batteries, and software updates to ensure you are ready to test accurately for years to come. We apply factory procedures that use fast, automated calibration and functional verification, maintenance using OEM parts and the application of all engineering change orders and software updates. Services are available through contract Care plans, FleetCare or per incident as requests. 

Top 4 Reasons to Choose VIAVI for Your Repair and Calibration Needs:

  • Minimize business disruption
  • Budget
  • Measurement Accuracy and Product Reliability
  • Measurement Compliance, TL9000 certification and OEM Standards

Explore More


如何开始

对产品演示感兴趣? 请与我们联系以了解详细信息、获取报价或者了解如何购买。