MAP 系列 O 波段光放大器 (SOA/mSRC-C23000SA) (Discontinued)

MAP 系列 O 波段光放大器 (SOA/mSRC-C23000SA)

单信道、偏振无关半导体光放大器 (SOA)

This product has been discontinued.

This product has been discontinued

随着 100GE、200GE 和 400GE 要求的传输损耗持续降低,像这款 O 波段光放大器一样的光放大器连同衰减器、功率计和开关一起已经成为了测试自动化工具套件中的重要元件。在制造测试系统中,以下三种关键场景需要放大:

  • 基本测试系统自动化以及衰减器、开关和合波器/分波器的使用导致路径损耗超出了限额。
  • 参考发射器的功率不够高,无法实现过载情况。
  • 制造中的测试可能在环回模式下执行,并且 DUT TX 没有足够的功率,无法实现过载和保证互操作性。

mSRC-C-23000SA 提供了足够的增益来克服这些问题,并确保可对接收器在其完整动态范围上进行验证。放大器的带宽可支持 LR4 和 LR8 接口中使用的波长。如果设置为禁用状态,放大器可提供 > dB 的衰减,并有效地隔离单独的载波。

mSRC-C­2000SA 具有简单直观的图形用户界面 (UI),以便在研发环境中使用。UI 可在 10% 至 100% 的范围内控制功率电平设置,或者完全禁用功率。作为 LightDirect 系列 MAP 系列模块的一部分,mSRC-C­23000SA 支持以太网或 GPIB 通信,并且可使用基于 PC 的自动化系统或通过 VNC 直接管理。它可部署在所有 MAP 系列机箱中 — 包括紧凑型插槽 MAP­220C 机箱以及更大的 3 插槽和 8 插槽机架安装式机箱(分别为 MAP­230 和 MAP-280)。mSRC-C­23000SA 连同各种各样的其他 MAP-200 模块(包括放大器、精密衰减器、功率计和频谱分析仪)一起,使 MAP 系列成为理想的模块化光学测试平台。

优点:

  • O 波段中的小信号增益 > 10 dB
  • 饱和输出功率 > 10 dB
  • 工作范围为 1270 至 1340 纳米,只会出现极少的频谱波动
  • 偏振无关的输入
  • 温度稳定功能

应用:

  • 测试 LR4 以及 LR8 100GE、200GE 和 400GE 接口
  • 接收过载和恢复测试
  • 用于无源器件测试的宽带光源

服务

Instrument Care Support Plans

Save up the 50% of standard service prices and obtain priority service when you buy a bundled plan at the same time the instrument is purchased. Care Support Plans offer the best way to purchase extended warranty, premium technical support, self-paced training, and critical maintenance services like calibration services that include software and engineering change order update services to ensure your product is maintained with current software and a calibration certificate. These discounted plans are 2-5 years long when purchased upfront with your VIAVI instruments.


VIAVI Care 支持

服务BronzeCareSilverCareMaxCareGoldCareFleetCare
 BronzeCareSilverCareMaxCareGoldCareFleetCare
技术支持高级版高级版高级版高级版高级版
工厂维修

标准服务 + 定制菜单:
 现场校准和培训,FAE 天数,
自定义工程或软件订阅

优先服务
自定进度的培训

5 年电池和包覆盖 *

 
工厂校准 

配件覆盖

  
备机借用  
* 仅限 5 年计划;如果适用

电池/包覆盖
电池和包会随着日常使用和充电周期而磨损。为了确保这些项目不会拖累您,我们的 5 年计划包括在您的 5 年计划的整个生命周期内进行更换。

在为期 5 年的 SilverCare 或 MaxCare 支持计划期间,VIAVI 将提供一次更换损坏的电池和磨损的软包/手套的服务。只有当仪器被送回 VIAVI 进行维修或校准服务时,才会更换该仪器。硬箱排除在外,覆盖不适用于不带包/电池销售的仪器。

此覆盖包括在 5 年 Silver 和 MaxCare 计划中

MaxCare 配件更换覆盖
仪器产品配有配件电缆和连接器端子。为了确保可靠、准确的测试,我们将每年更换一个配件,以确保良好的测试结果。

当配件被确定为有缺陷或有故障时,VIAVI 将免费为客户修理配件或根据 VIAVI 的判断进行更换。更换的配件可能是新的,也可能是翻新的。所有退回的配件归 VIAVI 所有。适用以下限制:每 12 个月内可更换的配件最多为一个;适用的配件仅包括那些被认为对仪器运行至关重要且随原始购买产品一起发货的附件。如果存在问题,或者在校准或维修服务事件期间,客户有责任将有故障的附件寄回 VIAVI。

备机借用
现在您无需停机便可安排校准或维修。备机借用服务可在您将设备送去校准或进行突发性检修时向您出借类似配置的设备。


Care 支持计划 - MAP

Care Support Plan - MAP

产品类型推荐计划BronzeCare
BronzeCare
SilverCare
SilverCare
MaxCare
MaxCare
为什么要校准?
MAP (Mainframe/Module)Bronze-3

为什么要校准这个产品?
有哪些常见问题?

Factory standards to ensure accuracy MAP

Why calibrate this product?

It is essential in manufacturing environment to ensure your product meets the published/customer requirements. Having accurate measurements ensures highest possible yields whilst maintaining product specifications. Ensuring all that the optical test equipment is performing as designed and calibrated is requirement in achieving that goal.

Viavi will validate measurement accuracies conform to published specifications.

Maintain connectors and pigtails.

Factory standards to ensure accuracy

VIAVI is a TL9000 company and calibrates this instrument based on general requirements for the competence of calibration and testing laboratories (ISO/IEC 17025:2005) to ensure your instrument is certified to measure accurately. Instruments that are out of calibration will produce unreliable measurements and can create false passing or false failing test results that often cause your team repeat work. We maintain, polish and clean all fiber connectors, fix pigtail connections that are internal to the product to ensure all parts stay in good working order and upgrade software / firmware to the latest approved release to enable enhancements. VIAVI Care Plans are the most cost-effective way to plan for calibration with a low, discounted price at the time of instrument purchase.  Fixed rate calibration can also be purchased later via a separate purchase order.

  • Ensure accurate measurements that meet design expectations and optical budgets.
  • Maintain ports and connectors to keep signals working properly and to extend the life of the instrument. For example, if optical connectors or lasers are bad or interface ports are loose then after repeated connection cycles, optical measurements may be inaccurate or damage may occur.
  • When manufacturing optical network products, accurate, reliable and repeatable optical measurement performance is essential to compliance with published/committed product specifications
  • Know that optical product design, product manufacturing and customer expectations are accurate and in alignment throughout product lifecycle

Most business common implications MAP

How will my measurements be affected if the product is out of calibration?

Inaccurate measurements may prevent verification of power levels or introduce other measurement uncertainties, errors and artifacts. Out-of-calibration instruments can result in design errors, production problems, end customer escalations, increased failure rates, audit non-compliance or even ultimately loss of business. 

What are the most common implications of these issues to the business?

  • Uncalibrated tools produce unreliable measurement results that can't be certified to specifications and may violate product agreements or ISO/TL9000 standards with your customers and their network equipment vendors.

  • Design errors resulting from inaccurate measurements can result in ongoing issues throughout the product lifecycle including poor yields, inaccurate optical budgets, increased return rates  and customer expectation mismatch.

  • Production costs can be elevated by increased re-work, reduced yield and inconsistencies between measurements.

Common Business impacts include:

  • Lost revenue, customer complaints and increased costs.
  • Quality audit failures.
  • For end customers, repeat product quality issues with vendors often cause added cost, customer dissatisfaction and loss of business.

 


VIAVI Care Support for Existing Equipment

FleetCare
FleetCare

FleetCare plans can be customized to include any service entitlements on your fleet of existing equipment. Please fill out a Service Contracts form for a quote.

  • Any collection instruments with a single coterminous renewal date
  • Each contract is customized with any number of annual terms required by the customer
  • Onsite Calibration, Training, Field Application Engineer days can be added

View Support Plans For Existing Equipment


Repair and Calibration

Our products live in rugged environments for over 10 years with 1000s of test connect/disconnect cycles.  We will be there to support you to ensure components that require maintenance like connectors, batteries, and software updates to ensure you are ready to test accurately for years to come. We apply factory procedures that use fast, automated calibration and functional verification, maintenance using OEM parts and the application of all engineering change orders and software updates. Services are available through contract Care plans, FleetCare or per incident as requests. 

Top 4 Reasons to Choose VIAVI for Your Repair and Calibration Needs:

  • Minimize business disruption
  • Budget
  • Measurement Accuracy and Product Reliability
  • Measurement Compliance, TL9000 certification and OEM Standards

Explore More


如何开始

对产品演示感兴趣? 请与我们联系以了解详细信息、获取报价或者了解如何购买。