CellAdvisor Cable and Antenna Analyzers JD723C/JD724C/JD725A
Vous êtes ici

CellAdvisor Cable and Antenna Analyzers JD723C/JD724C/JD725A

CellAdvisor Cable and Antenna Analyzer is a rugged, easy-to-use, all-in-one tool with everything you need for cell site installation.

Présentation

CellAdvisor Cable and Antenna Analyzers provide integrated solutions for line sweep measurement, RF / optical power measurements, and fiber inspection, in a lightweight, cloud-enabled instrument ideal for cell site installation.

The majority of problems in wireless networks occur at the base station infrastructure, composed of the antenna system, cables, and connectors and they are typically related to the cable feed-line (coax or fiber). Contamination in fiber connectors is the most common problem associated with Fiber. All wireless networks with fiber based feed-lines require the verification of both RF and Fiber. Until now multiple instruments were used for these tests, one for RF and another for Fiber, and the JD720C series cable and antenna analyzer is the first cable and antenna analyzer that provides an integrated solution for fiber and coax, being the most versatile and optimal instrument to properly service and install cell sites.

Model Frequency RF tests Fiber tests
Fiber inspection, optical power
Self-guided tests TestWizard Cloud service
StrataSync
1-port
Return loss, VSWR, DTF, cable loss, RF power
2-port
Gain/insertion loss
JD723C 100 MHz to 2.7 GHz x   x x x
JD724C 5 MHz to 4 GHz x   x x x
JD725C 5 MHz to 4 GHz x x x x x
JD726C 5 MHz to 6 GHz x x x x x

Highlights

  • RF and fiber testing in a single solution
  • Manage assets and reduce costs with cloud-enabled StrataSync
  • Detect signal degradation over time with Trace Overlay
  • Reduce test time by making two measurements simultaneously on one display
  • Instant problem notification with simple PASS/FAIL indications
  • Enable faster and easier calibration with EZ-Cal

Applications

  • Verify cell-site cable and antenna systems
  • Test distributed radios with RF and fiber feed-lines
  • Validate DAS deployments
  • Test NFC antennas (RFID and security equipment)

Key Features

  • Inspect fiber with PASS/FAIL indications using P5000i fiber microscope
  • Measure RF and optical power using power sensors
  • Three zoom zones for detailed analysis on multi-frequency bands
  • Up to 40 dBm (10W) RF port protection
  • Generate PDF/HTML reports
  • Automatically saves events that exceed pre-defined limits
  • Application software for post-analysis (JDViewer) and remote control (JDRemote)
  • Web-based remote control via Bluetooth and Wi-Fi

Stratasync Enabled

The CellAdvisor Cable and Antenna Analyzer is StrataSync enabled
StrataSync is a hosted, cloud-based solution that provides asset, configuration, and test data management for VIAVI instruments and ensures all instruments have the latest software and options installed.

Comparer

All of our CellAdvisor models are rugged and portable, and offer cloud-enabled centralized management through StratasyncTM. And CPRIAdvisor, our new, highly-scalable solution, allows you to remotely monitor RF conditions 24/7.

Choose the model that’s right for you using the chart below.

  Base Station Analyzer Signal Analyzer RF Analyzer Cable and Antenna Analyzer CPRIAdvisor
Spectrum Analysis Y Y Y - Y
Cable & Antenna Analysis Y - Y Y -
Insertion Gain/Loss Optional Optional Optional Y* -
RFoCPRI Optional Optional Optional - Y
RFoOBSAI Optional Optional Optional - Y
Interference Analysis Optional Optional Optional - Y
Signal Analysis Optional Optional - - -
PIM Detection Y Y Y - Y
T1/E1 Analysis Optional - - - Y
DAS Test Y Y - - -
Bluetooth Optional Optional Optional Optional N/A
RF Power Y Y Y Y -
Optical Power Y Y Y Y -
Fiber Inspection Y Y Y Y -
Cloud Services Optional Optional Optional Optional Y

*depends on model

Notes d’application

Brochure

Études de cas

Fiche technique produit

Fiche gamme produit

Manuel / Guide utilisateur

Poster

Fiche produit / solution

Fiche promotionnelle

Guide de sélection produit

Livre blanc