CellAdvisor Cable and Antenna Analyzers JD723C, JD724C, JD725C, JD726C
CellAdvisor Cable and Antenna Analyzers provide integrated solutions for line sweep measurement, RF / optical power measurements, and fiber inspection, in a lightweight instrument ideal for cell site installation.
The majority of problems in wireless networks occur at the base station infrastructure, composed of the antenna system, cables, and connectors and they are typically related to the cable feed-line (coax or fiber). Contamination in fiber connectors is the most common problem associated with Fiber. All wireless networks with fiber based feed-lines require the verification of both RF and Fiber. Until now multiple instruments were used for these tests, one for RF and another for Fiber, and the JD720C series cable and antenna analyzer is the first cable and antenna analyzer that provides an integrated solution for fiber and coax, being the most versatile and optimal instrument to properly service and install cell sites.
Model | Frequency | RF tests | Fiber tests Fiber inspection, optical power |
Self-guided tests TestWizard | |
1-port Return loss, VSWR, DTF, cable loss, RF power |
2-port Gain/insertion loss |
||||
JD723C | 100 MHz to 2.7 GHz | x | x | x | |
JD724C | 5 MHz to 4 GHz | x | x | x | |
JD725C | 5 MHz to 4 GHz | x | x | x | x |
JD726C | 5 MHz to 6 GHz | x | x | x | x |
Highlights
- RF and fiber testing in a single solution
- Detect signal degradation over time with Trace Overlay
- Reduce test time by making two measurements simultaneously on one display
- Instant problem notification with simple PASS/FAIL indications
- Enable faster and easier calibration with EZ-Cal™
Applications
- Verify cell-site cable and antenna systems
- Test distributed radios with RF and fiber feed-lines
- Validate DAS deployments
- Test NFC antennas (RFID and security equipment)
Key Features
- Inspect fiber with PASS/FAIL indications using P5000i fiber microscope
- Measure RF and optical power using power sensors
- Three zoom zones for detailed analysis on multi-frequency bands
- Up to 40 dBm (10W) RF port protection
- Generate PDF/HTML reports
- Automatically saves events that exceed pre-defined limits
- Application software for post-analysis (JDViewer) and remote control (JDRemote)
- Web-based remote control via Bluetooth and Wi-Fi
All of our CellAdvisor models are rugged and portable.
Choose the model that’s right for you using the chart below.
Base Station Analyzer | Signal Analyzer | RF Analyzer | Cable and Antenna Analyzer | |
---|---|---|---|---|
Spectrum Analysis | Y | Y | Y | - |
Cable & Antenna Analysis | Y | - | Y | Y |
Insertion Gain/Loss | Optional | Optional | Optional | Y* |
Optional | Optional | Optional | - | |
RFoOBSAI | Optional | Optional | Optional | - |
Interference Analysis | Optional | Optional | Optional | - |
Signal Analysis | Optional | Optional | - | - |
PIM Detection | Y | Y | Y | - |
T1/E1 Analysis | Optional | - | - | - |
DAS Test | Y | Y | - | - |
Bluetooth | Optional | Optional | Optional | Optional |
RF Power | Y | Y | Y | Y |
Optical Power | Y | Y | Y | Y |
Fiber Inspection | Y | Y | Y | Y |
*depends on model
Literatura
Notas de aplicação
- Certify Cable and Antenna Systems Efficiently and Consistently with TestWizard
- DAS Deployment Overview: Streamlined Approaches for DAS Deployments
- Essential Distributed Antenna Systems (DAS) Deployment Testing
- Essentials of Fiber to the Antenna: Cable and Antenna Testing
- Essentials of Fiber to the Antenna: Overview
- JD730 Series Power Sensors
Folhetos
Estudos de caso
Data sheets
Manuais e guias do usuário
Ofertas
Pôsteres
Guias de seleção
Serviços
Versões de software e firmware
Artigos técnicos e livros
Downloads e atualizações de software
Care Support Plans
Product Group | Recommend Plan | Bronze | Silver | Maxcare | Why Calibrate? |
---|---|---|---|---|---|
CellAdvisor JD72xC | Silver-5 | Why calibrate this product? What are the common issues? |
-
VIAVI Care Support
Services Bronze Silver MaxCare ImagemImagemImagemTechnical Assistance Premium Premium Premium Factory Repair Priority Service Self-paced Training Factory Calibration Express Loaner * 5-year plans only; if applicable
-
VIAVI Care Support for Existing Equipment
Imagem
FleetCareFleetCare plans can be customized to include any service entitlements on your fleet of existing equipment. Please fill out a Service Contracts form for a quote.
- Any collection instruments with a single coterminous renewal date
- Each contract is customized with any number of annual terms required by the customer
- Onsite Calibration, Training, Field Application Engineer days can be added
-
Repair and Calibration
Our products live in rugged environments for over 10 years with 1000s of test connect/disconnect cycles. We will be there to support you to ensure components that require maintenance like connectors, batteries, and software updates to ensure you are ready to test accurately for years to come. We apply factory procedures that use fast, automated calibration and functional verification, maintenance using OEM parts and the application of all engineering change orders and software updates. Services are available through contract Care plans, FleetCare or per incident as requests.
Top 4 Reasons to Choose VIAVI for Your Repair and Calibration Needs:
- Minimize business disruption
- Budget
- Measurement Accuracy and Product Reliability
- Measurement Compliance, TL9000 certification and OEM Standards
Produtos relacionados
Assistência em cada passo
Oferecemos assistência, serviços, treinamento completo e os recursos de que você precisar. Isso tudo faz parte do que fazemos para maximizar o valor de seu investimento VIAVI.
Queremos ajudar
Estamos aqui para ajudar no seu futuro.