- Copies traffic from three full-duplex optical links for three optical monitoring devices
- Connects to three full-duplex links under test and three analyzers equipped with a dual-receive capture card
- Available in both gigabit and 10 gigabit configurations
Install Observer nTAPs on 1, 10, or 40 Gb single or multi-mode optical links. Or select our newest offering, the Observer High-Density Optical nTAP (HDOT) to mix and match these network speeds or 100 Gb in any combination across 24 modules in a 1U rack.
Use optical nTAPs to send identical copies of critical traffic to network analyzers, remote monitoring appliances, forensics tools, and similar devices capable of supporting dual, non-aggregated data streams. For further flexibility, Observer Copper-to-Optical and Optical-to-Copper Conversion nTAPs are available.
Use the Three-Channel Optical nTAP to connect up to three full-duplex optical links. Then attach optical monitoring devices to the nTAP. To successfully analyze the full-duplex link, the monitoring devices must be equipped with a dual-receive capture card.
|Height (box)||1.1 in / 2.79 cm|
|Width (box)||4.55 in / 11.56 cm|
|Width (faceplate)||5.85 in. / 14.6 cm|
|Depth (faceplate back)||7.66 in / 19.46 cm|
|Height (faceplate)||1.10 in / 2.79 cm|
|Multimode (62.5 μm)||Multimode (50 μm)||Single-mode (9 μm)|
Maximum Insertion Losses (dB)
|Split Ratio||Multimode 62.5 μm||Multimode 50 μm||Single-mode 9 μm|
|(1300 nm)||(850 nm)||(1300 nm)||(850 nm)||(1310/1550 nm)|
|50/50||3.9/3.9 dB||4.7/4.7 dB||4.5/4.5 dB||5.5/5.5 dB||3.6/3.6 dB|
|Fiber Diameter(s)||50 μm or 62.5 μm||9 μm|
|Wavelength Ranges (dual window)||850 nm or 1300 nm||1310 nm or 1550 nm|
|Temperature Range (operating)||-40° to 185° (F) / -40° to 85° (C)|
|Temperature Range (storage)||-52° to 185° (F) / -47° to 85° (C)|