The 3515AR-EP Test set is a complete communication service monitor designed to test EPLRS radios The 3515AR-EP includes spectrum analyzer, oscilloscope and test script language for automating tests, incorporating test instructions, data collection, etc.
Isolate failures in the radio, antenna, or cable in minutes
- Stand-off tests of tactical radios from 2 MHz to 1 GHz frequency range
- Isolates failures in nearly any platform’s radio, antenna, or cable
- Runs tests in minutes without removing or disconnecting the radio
- Measures high power —20 watts without an external attenuator, up to 200 watts with external attenuator
- Minimal personnel training
NSN: 6625-01-618-8588
EXPORT CONTROL:
This product is controlled for export under the International Traffic in Arms Regulations (ITAR). A license from the U.S. Department of State is required prior to the export of this product from the United States.
Isolate failures in the radio, antenna, or cable in minutes
- Stand-off tests of tactical radios from 2 MHz to 1 GHz frequency range
- Isolates failures in nearly any platform’s radio, antenna, or cable
- Runs tests in minutes without removing or disconnecting the radio
- Measures high power —20 watts without an external attenuator, up to 200 watts with an external attenuator provided
- Minimal personnel training
Rugged, portable, battery powered
- Portable—weighs approximately 8 lbs with battery
- Long-lasting battery—5 hours of operation and recharge in 4 hours
- Rugged—meets MIL-PRF-28800F for humidity, altitude, shock, and vibration
- Weatherproof case with operating range of -20° to +50°C
Stand-off Tests
- AM/FM transmitter tests
- RF power
- RF frequency error
- AM modulation/FM deviation
- Audio frequency counter
- Receive Signal Strength Indicator (RSSI)
- AM/FM receiver tests
- DCS generator
- Distortion
- SINAD/sensitivity
- Antenna/cable tests
- VSWR
- Distance to fault
- Return loss
- Cable loss
- Talk Test (using handset and antenna)
Contents
- Spectrum Analyzer
- Oscilloscope
- Script Language
- PRM-34 Test
Comment commencer
Intéressé par une démonstration de produit ? Contactez-nous pour de plus amples informations, pour recevoir un devis ou pour effectuer une commande.