STM-4/OC-12/STM-1/OC-3 LIM (J6810B) (Discontinued)

The STM-4/OC-12/STM-1/OC-3 LIM (J6810B) helps network professionals isolate and resolve network problems quickly on SONET and SDH networks.

This product has been discontinued.

This product has been discontinued

Please consider this product instead:

6/30/2017

The STM-4/OC-12/STM-1/OC-3 LIM (J6810B) helps network professionals isolate and resolve network problems quickly on SONET and SDH networks.

  • Can be used with the Network Analyzer - Wireline Protocol Test (J6840), Protocol Analysis Probe - DNA (J6801B) and Protocol Analysis Probe - DNA MX (J6802B) platforms.
  • Hot-swappable - a LIM can be removed safely while an application is running and another LIM inserted in its place; the current application terminates and the user can launch another suitable application for the new LIM without having to power down and restart the analyzer.

Sub-channel analysis capabilities enable analysis and troubleshooting on thousands of trunks and channels from a single Network Analyzer connected to a single test access port.

Directly lower the cost of network maintenance by reducing costly resources:

  • Replace hundreds of DS-1 and DS-3 test access ports with one STM-4/OC-12 test access port
  • Replace multiple analyzers and probes and with one Network Analyzer
  • Reduce the management network require to support multiple analyzers and probes
  • Reduce operations time required to repeatedly connect, configure, re-connect, re-configure test equipment
  • STM-4/OC-12/STM-1/OC-3 LIM (J6810B) Features
  • Dual-rate STM-4/OC-12 (622Mbps) and STM-1/OC-3 (155Mbps) interface connects to SDH and SONET networks
  • 100% full line-rate capture
  • Sub-channel analysis on multiple ATM and WAN technologies, including ISDN
  • ATM and Packet over SONET bulk-rate analysis
  • Real-time AAL-2 and AAL-5 reassembly on up to 4096 virtual channels
  • Full rate cell mode and frame mode ATM generation and ATM Ping at 622 Mb/s and 155 Mb/s
  • Real-time expert analysis, traffic and performance statistics, and protocol decodes
  • Single-mode and multi-mode fiber supported with LC connectors
  • Auto-discovery of the VPI-VCIs of up to 4,096 ATM virtual channels
  • Hardware filtering for capture and analysis based on VPI-VCI
  • Real-time line status and statistics
  • ATM Policing, Traffic Contract Estimation and 1-point CDV on multiple virtual circuits simultaneously
  • Supports new J6828A Four-port STM-1/OC-3 LIM Multiplexer
  • Performs optical power measurements on each optical receiver

Primeros pasos

¿Le interesa una demostración de algún producto? Póngase en contacto con nosotros para obtener más información, recibir un presupuesto o averiguar cómo adquirir un producto.