GC-130 GPS Antenna Coupler Kit

Solves the problem of poor GPS coverage in hangar environments or when a simulated static or dynamic GPS signal is required
Image

The VIAVI GC-130 GPS Antenna Coupler provides >20 dB of antenna isolation, ensuring outside GPS signals are not seen by the aircraft’s GPS receiver when simulating a user defined GPS signal. The coupler mounts directly over the aircraft’s GPS antenna.

The GC-130 is designed for use with the VIAVI GPSG-1000 GPS Simulator when the supplied antenna coupler is too small to accommodate the GPS antenna of the system under test.


Benefits: 

  • Reliable GPS simulation in hangars and other low coverage areas
  • When used with the GPSG-1000 GPS Simulator:
  • Almanac and TOD update when no outside GPS signal is available
  • Sensitivity testing of the GPS system
  • Dynamic GPS simulation to simulate aircraft movement for testing of other aircraft systems
  • Determine latency of the GPS and transponder systems

Key Features:

  • Provides >20 dB of antenna isolation
  • <1 dB repeatability
  • Supports GPS antennas up to 14 inches in diameter
  • Rugged design for ramp use

Included in kit:

  • GC-130 GPS Antenna Coupler
  • Rigid transit case
  • Coax cable, 20 ft. TNC

Littérature

Suivi à chaque étape

Nous assurons l’assistance, les services, des formations complètes ainsi que les ressources qu’il vous faut. Tout cela dans le but de maximiser la valeur de vos investissements VIAVI.

Laissez-nous vous aider

Nous sommes là pour vous aider à prendre une longueur d’avance.