Vous êtes ici

Les produits ONT de VIAVI prennent en charge les tests et la vérification des nouveaux éléments d’un réseau haut débit dans une large gamme de technologies et de scénarios. Grâce à nos plateformes de test, les fabricants peuvent s’adapter et répondre aux demandes croissantes en services orientés réseau, tout en suivant les évolutions technologiques incessantes.

  • Benefits

    All application modules share the same GUI and identical automation and scripting, so that they can be used throughout the product development cycles.

  • Applications
    • Detailed hardware level testing with unframed and protocol based traffic.
    • 25G, 50G, 100G and 400G Optical Modules validation: electrical lanes stressing (clock offset variation, TX pre-emphasis and RX equalization manipulation, dynamic skew) per IEEE standards, MDIO/I2C management interface verification (peek/poke, HW pins control, MDIO/I2C Dump)
    • Support for OTN, Ethernet, Fibre Channel, CPRI, and SONET/SDH
    • Qualify PTP (IEEE 1588) implementations in optical networks and equipment
    • Full service disruption and latency measurements for all supported technologies
    • Equipment Manufacturers: Support for R&D, SVT (system verification/test), and production environments covering the entire product life cycle
    • Service Providers: Conduct product qualification and benchmark testing before deployments and bring to the field for first office applications (FOA)
    • Data Centers: Fully verify data center interconnect elements and long-haul transmission elements for quality and performance and fully stress and verify pluggable optics including active optical cables.
  • Key Features
    • Multiple mainframe options including rackmount, desktop, and modules with built-in display for mobile test needs.
    • Supports testing of all major transport technologies for equipment manufacturers, service providers, and data centers
    • OTN: up to OTU4 with ODU Muxing down to ODU0; ODUflex, ODU multichannel, and FlexO
    • Ethernet: Gigabit Ethernet up to 400 GE and FlexE fully supported with full stress/margin analysis
    • SDH/SONET: 155 Mbps up to 40G
    • Fibre Channel: 1/2/4/8/10/16G FC
    • CPRI unframed and framed testing: CPRI line bit rate option 1 (614.40 Mbps) up to option 9 (12.165 Gbps)
    • Most accurate latency and service disruptions measurements for OTN, Ethernet, CPRI, Fibre Channel, and SONET/SDH
    • Browser-oriented graphical user interface (GUI)
    • Full multitasking operation
    • Full automation support via CLI or with drivers and libraries for LabWindows CVI, LabView, Python and Tcl/Tk

Produits

800G FLEX Module
ONT-800 Optical Network Testers
Highly configurable, multi-protocol, multi-port test platform for R&D and system verification of optical transport ICs, modules, and systems
800G FLEX Module
800G FLEX Module
400G QSFP-DD Test Module for the ONT-800
ONT-600 N-PORT Test Module
The VIAVI ONT N-PORT module is a 4-port solution for test and system verification of 100G-class products. It supports four native, fully independent QSFP28 or SFP28 ports. Test applications include Ethernet, OTN, and Fiber Channel.
ONT-600 Test Solutions for 25GE up to 100GE / OTU4
The CFP and CFP2 Test Modules support testing and verification of new high-speed network elements for 25GE, 40GE, OTU3, 50GE,100GE and OTU4. They enable the development of 100G class products based on CFP and CFP2 technologies. CFP4 and QSFP28 support is available via adapters.
ONT-600 Multiport Test Module
The MTM provides high density 155M to 11.3G testing at layers 1 through 3. Concurrent users can control a broad protocol range including OTN, GigE/10GigE LAN, SONET/SDH, and Fiber Channel.
ONT-600 400G CFP8 Module
The 400G CFP8 Module is a scalable test solution based on the latest standard for 400G and 200G Ethernet (IEEE 802.3 bs) and ready for OTUCn. It boasts a CFP8 slot to host the first-generation 400G pluggables, support for upcoming QSFP-DD and OSFP available via adapters. FlexE and FlexO applications are addressed via 5 QSFP28 slots.
ONT-600 FlexE
ONT-600 FlexE
Software Option for ONT-600 QFLEX, CFP8 QFLEX Data and CFP8 PHY Module

Suivi à chaque étape

Nous assurons l’assistance, les services, des formations complètes ainsi que les ressources qu’il vous faut. Tout cela dans le but de maximiser la valeur de vos investissements VIAVI.

Services

Des prestations de service à valeur ajoutée qui optimisent le retour sur investissement de votre solution système et de votre gamme d’instruments VIAVI"

Service clientèle

Un service client qui émet les autorisations de retour de matériel (Return Material Authorization, RMA) pour les réparations et la calibration.

Formation

Des solutions de formation technique, une formation à l’utilisation des produits et un enseignement mixte pour les techniciens qui utilisent de nouveaux produits ou travaillent avec les outils existants

Assistance technique

Le centre d’assistance technique de VIAVI peut vous aider à utiliser/configurer vos produits ou à résoudre des problèmes liés aux performances des produits

Comment commencer

Intéressé par une démonstration de produit ? Contactez-nous pour de plus amples informations, pour recevoir un devis ou pour effectuer une commande.

Contacter un expert
Obtenir un devis