Testador de rede óptica (ONT)

As ferramentas de laboratório e produção da VIAVI lançam no mercado produtos mais rápidos, sem comprometer a qualidade.

A família de produtos ONT da VIAVI suporta testes e verificação de novos elementos de rede de alta velocidade em toda uma vasta gama de tecnologias e cenários. Nossas plataformas de teste ajudam os fabricantes a escalar para atender às demandas de crescimento dos serviços direcionados pela rede e são responsáveis por tecnologias em constante evolução.

  • Benefits

    All application modules share the same GUI and identical automation and scripting, so that they can be used throughout the product development cycles.

  • Applications
    • Detailed hardware level testing with unframed and protocol based traffic.
    • 25G, 50G, 100G and 400G Optical Modules validation: electrical lanes stressing (clock offset variation, TX pre-emphasis and RX equalization manipulation, dynamic skew) per IEEE standards, MDIO/I2C management interface verification (peek/poke, HW pins control, MDIO/I2C Dump)
    • Support for OTN, Ethernet, Fibre Channel, CPRI, and SONET/SDH
    • Qualify PTP (IEEE 1588) implementations in optical networks and equipment
    • Full service disruption and latency measurements for all supported technologies
    • Equipment Manufacturers: Support for R&D, SVT (system verification/test), and production environments covering the entire product life cycle
    • Service Providers: Conduct product qualification and benchmark testing before deployments and bring to the field for first office applications (FOA)
    • Data Centers: Fully verify data center interconnect elements and long-haul transmission elements for quality and performance and fully stress and verify pluggable optics including active optical cables.
  • Key Features
    • Multiple mainframe options including rackmount, desktop, and modules with built-in display for mobile test needs.
    • Supports testing of all major transport technologies for equipment manufacturers, service providers, and data centers
    • OTN: up to OTU4 with ODU Muxing down to ODU0; ODUflex, ODU multichannel, and FlexO
    • Ethernet: Gigabit Ethernet up to 400 GE and FlexE fully supported with full stress/margin analysis
    • SDH/SONET: 155 Mbps up to 40G
    • Fibre Channel: 1/2/4/8/10/16G FC
    • CPRI unframed and framed testing: CPRI line bit rate option 1 (614.40 Mbps) up to option 9 (12.165 Gbps)
    • Most accurate latency and service disruptions measurements for OTN, Ethernet, CPRI, Fibre Channel, and SONET/SDH
    • Browser-oriented graphical user interface (GUI)
    • Full multitasking operation
    • Full automation support via CLI or with drivers and libraries for LabWindows CVI, LabView, Python and Tcl/Tk

Produtos

The CFP and CFP2 Test Modules support testing and verification of new high-speed network elements for 25GE, 40GE, OTU3, 50GE,100GE and OTU4. They enable the development of 100G class products based on CFP and CFP2 technologies. CFP4 and QSFP28 support is available via adapters.
The MTM provides high density 155M to 11.3G testing at layers 1 through 3. Concurrent users can control a broad protocol range including OTN, GigE/10GigE LAN, SONET/SDH, and Fibre Channel.
The 400G CFP8 Module is a scalable test solution based on the latest standard for 400G and 200G Ethernet (IEEE 802.3 bs) and ready for OTUCn. It boasts a CFP8 slot to host the first-generation 400G pluggables, support for upcoming QSFP-DD and OSFP available via adapters. FlexE and FlexO applications are addressed via 5 QSFP28 slots.
ONT-600 FlexE
Software Option for ONT-600 QFLEX, CFP8 QFLEX Data and CFP8 PHY Module
The VIAVI ONT N-PORT module is a 4-port solution for test and system verification of 100G-class products. It supports four native, fully independent QSFP28 or SFP28 ports. Test applications include Ethernet, OTN, and Fiber Channel.

Assistência em cada passo

Oferecemos assistência, serviços, treinamento completo e os recursos de que você precisar. Isso tudo faz parte do que fazemos para maximizar o valor de seu investimento VIAVI.

Serviços

Serviços de valor agregado que complementam sua solução de sistema e o portfólio de instrumentos VIAVI para oferecer custo total de propriedade

Atendimento ao cliente

Atendimento ao cliente que oferece autorização de devolução de material (Return Material Authorization, RMA) para reparos e calibragem

Treinamento

Soluções de educação técnica, treinamento de produtos e aprendizagem combinada para os técnicos que estão usando novos produtos ou trabalhando com as ferramentas já existentes

Como começar

Tem interesse em uma demonstração de produto? Fale conosco para obter mais informações, receber uma cotação ou saber como comprar.