Powerful, flexible, convenient and very cost-effective — the Seeker D with MCA III System from VIAVI sets an entirely new standard for digital leakage management.
- High Performance, GPS-Based Leakage Management System that Accurately Monitors Leakage in All Digital Systems or Mixed Digital and Analog Systems with Unsurpassed Sensitivity from 2 uV/m to 2000 uV/m
- Near Real-Time Vehicle Tracking via LAW, Leakage Record Upload and Remote Programming via WiFi, Ethernet, or USB
- Optional Garmin Interface Provides Turn-by-Turn Directions to Leak Locations and Ability to Close-Out Leaks from Compatible Garmin Navigation Devices
- Cost Effective Solution Utilizing the Majority of Existing Seeker GPS Installation and Equipment
With the Seeker D™ and Seeker MCA III along with existing Seeker analog leakage detectors, the VIAVI Seeker GPS System provides the complete leakage solution. This means no investment for special drive-out vehicles is required, and every truck in the operator’s fleet can identify leakage outbreaks with GPS precision.
Digital Leakage Detection
The VIAVI Seeker D leakage detector accurately detects and measures signal leakage within the near-LTE and aeronautical frequency bands and features and unsurpassed sensitivity from 2 to 2000 uV/m.
The Seeker D works in conjunction with the CT-4™ Channel Tagger. The CT-4 is a 1U rack mounted unit that is located in the head end that provides an uncompromising tagging solution for active analog or digital systems.
In the NAV band, the Seeker D detects the proprietary signal from the CT-4 and scales it to be similar to leakage readings taken from an analog carrier. Consequently, readings taken from the Seeker meter and Seeker D meter produce similar results in the aeronautical band.
Whether testing for leaks in both digital and analog systems, or monitoring aeronautical bands or near-LTE, Seeker D provides all of the capability to find and fix leaks quickly, accurately, and effectively.
The Seeker D leakage detector and the included mobile mount allows you to utilize your existing LAW Server, and Garmin GPS receiver, while keeping your plant technologically ready to meet tomorrow’s leakage monitoring needs.
Advanced Channel Tagging
The CT-4 can act as a traditional CT-2™ or CT-3™ and can insert proprietary tagged signals in both the aeronautical range and the near-LTE range at the same time. This feature provides the ability to detect tagged leaks and ignore untagged leaks, saving time from false alarms from signals not originating in your system.
The CT-4 eliminates the risk of affecting any adjacent digital channels by injecting an adjustable signal from 10 to 30 dBmV, targeting approximately 30 dB below the chosen digital carriers.
Next Generation Mobile Support
The Seeker MCA III offers high-performance GPS location recording and documentation when monitoring only the aeronautical bands with existing Seeker leakage detectors or monitoring both the aeronautical and near-LTE bands with the Seeker D leakage detector. This device also allows you to daisy chain the mobile mounts of the Seeker and Seeker D units together in order to log data from multiple units mounted in the same vehicle.
While driving to a location or to work, the technician leaves the Seeker in the mobile mount, where it’s connected to vehicle power, an antenna, and a GPS receiver. The Seeker MCA III automatically monitors leakage outbreaks and records the data with a time/date stamp and the leak’s GPS location.
The operator has several options for providing the GPS receiver/antenna to link with the Seeker GPS system. If there is no existing unit, one can be obtained from VIAVI. If the vehicle is already equipped with a fleet management system using a GPS receiver, in many cases the Seeker GPS system can make use of it.
Uploading data records to a server can be fully automated, occurring whenever the vehicle enters a base location, via an operator-controlled Wi-Fi hotspot.
Early Detection Notifications
When a set threshold level within the Seeker has been surpassed, the Leakage Analysis Workshop™(LAW) will email an EDN (Early Detection Notification) to insure that large leaks will be identified immediately. This automatic process helps keep the technician from being distracted while driving or working.
AFS-2 Handheld Dipole Antenna - Long Pole (108 to 160 MHz)
Calibrated halfwave dipole with 50 Ohm impedance and long pole (3 meter) for low band (108 to 160 MHz) leakage detection. MUST SPECIFIY SINGLE FREQUENCY FROM 108 TO 160 MHZ. USE WITH THE SEEKER D REQUIRES 138 MHZ.
AFS-4 Handheld Dipole Antenna - Short Pole (108 to 160 MHz)
Calibrated halfwave dipole with 50 Ohm impedance and short pole (18 inch) for low band (108 to 160 MHz) leakage detection. MUST SPECIFIY SINGLE FREQUENCY FROM 108 TO 160 MHZ. USE WITH THE SEEKER D REQUIRES 138 MHZ.
AFS-7 Handheld Yagi Antenna - (580 to 640 MHz)
Calibrated directional Yagi antenna with 50 Ohm impedance for high band (612 MHz) leakage detection.
APM-3 Vehicle Antenna - Permanent Mount (108 to 160 MHz)
Vertical quarter wave whip antenna with permanent vehicle mount for low band (108 to 160 MHz) leakage detection. MUST SPECIFIY SINGLE FREQUENCY FROM 108 TO 160 MHZ. USE WITH THE SEEKER D REQUIRES 138 MHZ.
AVM-3 Vehicle Antenna - Magnetic Mount (108 to 160 MHz)
Vertical quarter wave whip antenna with magnetic vehicle mount for low band (108 to 160 MHz) leakage detection. MUST SPECIFIY SINGLE FREQUENCY FROM 108 TO 160 MHZ. USE WITH THE SEEKER D REQUIRES 138 MHZ.
AVM-4 Vehicle Antenna - Magnetic Mount (612 MHz)
Calibrated colinear array whip antenna with 50 Ohm impedance and magnetic vehicle mount for high band (612 MHz) leakage detection.
NFP-1 Near Field Probe
Passive near field probe with 50 Ohm impedance for leakage detection in the near field at any leakage detection frequency.
CAT5e Ethernet Patch Cable - 10 Foot (Quad-Shielded)
CAT5e Ethernet patch cable (10 foot) quad-shielded with 100 Ohm impedance and RJ-45 Male to Male connectors.
GPS Receiver For Seeker MCA II & MCA III
Garmin GPS Receiver with RS-232 (DB-9) interface for the Seeker MCA II. May be mounted with the included magnetic mount or bolted to a vehicle roof.
Vehicle Power Adapter with USB cable (CL-9)
Vehicle power adapter for the Seeker, Seeker SE, Seeker D, Seeker D Lite, 120 DSP, and 802 AWE. The Vehicle Power Adapter (CL-9) is not needed if using the Seeker or Seeker D Mobile Mounts and the Mobile Mount Power Cable that is included with the Seeker, Seeker SE, Seeker D.
Seeker Approved A/B/G/N Wi-Fi Access Point
This is a high-powered, long-range Dual Band Wireless N600 Outdoor Access Point with speeds up to 300Mbps on both its high-powered 2.4GHz and 5GHz radios. Encased in a rugged IP68-rated waterproof enclosure this versatile Outdoor Access Point can be configured in a number of modes and its dual band architecture enables network administrators to even select different operating modes per frequency band.
Seeker D Carrying Case
Carrying case for use with the Seeker D when out of the Seeker D Mobile Mount. This form fitted custom carrying case with belt loop includes a carrying strap and features storage for the low band antenna, high band antenna and near field probe.
Seeker D Digital Leakage Detector with Mobile Mount
GPS Compatible Digital Leakage Detector
This is a dual-band leakage detector capable of monitoring leakage within the aeronautical band and the LTE band in a complete digital system. The instrument will monitor each band independently utilizing the injected carriers from the CT-4. These inject carriers dual purpose as the tag signal and the leakage carrier for the Seeker D and will provide a measurement range from 2-2000 uV/m as referenced to an analog QAM carrier. Along with the CT-4, the Seeker D works in conjunction with the existing Seeker GPS system components and the LAW integrated Server Package.
The complete kit includes the Seeker D Leakage Detector, Seeker D Carrying Case, Seeker D Mobile Mount, 9 Inch RAM Mount with two (2) 1.5 Inch Mounting Balls, Mounting Nuts (x3), Low Band Rubber Duck Antenna, High Band Rubber Duck Antenna, Dual Antenna Diplexer, Mobile Mount to Diplexer Cable, Mobile Mount DC Power Cable, In-Line Fuse Holder (x2), 4A Automotive Fuse (x2), AC Travel Charger, USB Cable, Installation Guide & Installation Checklist.
THE SEEKER D REQUIRES A CT-4 CHANNEL TAGGER TO OPERATE. REQUIRES SEEKER SETUP PC SOFTWARE FOR CONFIGURATION. REQUIRES SEEKER MCA UNIT & LAW SERVER SOFTWARE OR INTEGRATED SERVER FOR MAPPING & ANALYSIS.
Seeker MCA III with Wi-Fi
Mobile Communications Adapter
This is a Seeker MCA III with serial data connection to GPS receiver and Wi-Fi Adapter for wireless data uploads. This unit mounts to the bottom of the Seeker or Seeker D Mobile Mount and receives measurement data from the Seeker or Seeker D and related GPS coordinates from the GPS receiver and then uploads measurement data and GPS coordinates to the Seeker or Seeker D for interim storage and transfer to the Leakage Analysis Workshop (LAW) Server.
The upload is accomplished via either a Wi-Fi hotspot, Fleet Management System wireless connection, or a USB connection from the Seeker or Seeker D to a client PC running the LAW upload applet with an internet connection from the client PC to the LAW Server.
The complete kit includes the Seeker MCA III, Mobile Mount Serial Data Cable, Wi-Fi antenna with 12' coaxial cable and Installation Hardware. REQUIRES SEEKER SETUP PC SOFTWARE FOR CONFIGURATION. REQUIRES SEEKER OR SEEKER D & LAW SERVER SOFTWARE OR INTEGRATED SERVER FOR MAPPING & ANALYSIS.
Battery: Seeker / DSP
Li-ION battery for the Seeker Lite, Seeker Lite², Seeker, Seeker SE, Seeker D, Seeker D Lite Leakage Detectors, and 120 DSP.
Seeker D Mobile Mount
Mobile mount with mobile mount power cable, antenna diplexer & mobile mount to antenna diplexer RF cable for the Seeker D.
Seeker & Seeker D Mobile Mounts or Seeker BB-2 DC Power Cable (Non-Green)
DC power cable for Non-Green Seeker & Seeker D Mobile Mounts or Seeker BB-2.
Vehicle Wiring Protection Kit for Seeker & Seeker D Mobile Mounts
Vehicle wiring protection kit for use with the Seeker, Seeker SE and Seeker D mobile mounts. This kit protects both the positive (+) and negative (-) circuits supplied to the mobile mount through the included power cable. The complete kit includes a pair of each of the following items; in-line automotive fuse holder, 4 Amp automotive fuse & butt splices.
Seeker D Antenna Diplexer
Antenna diplexer for the Seeker D Mobile Mount. This diplexer includes inputs for the low and high band vehicle mount antennas and and a combined output to the Seeker D Mobile Mount.
Seeker D Mobile Mount to Antenna Diplexer RF Cable
Mobile Mount to Antenna Diplexer RF Cable for connecting the Seeker D Mobile Mount to the Seeker D Antenna Diplexer.
Rubber Duck Antenna (Low Band)
Rubber duck monopole antenna with 50 Ohm impedance for low band (108 to 160 MHz) leakage detection.
Rubber Duck Antenna (High Band)
Rubber duck monopole antenna with 50 Ohm impedance for high band (612 MHz) leakage detection.
AC to DC Power Adapter & Battery Charger with USB Charge & Data Cable
AC to DC power adapter & battery charger for the Seeker, Seeker SE, Seeker D, Seeker D Lite, 120 DSP, and 802 AWE. Charger provides a Type-A USB Socket for use with TYPE-A USB power cables. Includes a Type-A USB to Mini USB Charge/Data Cable (I/O-20).
Remote Wi-Fi Antenna for Seeker MCA III (2.4 & 5 GHz)
Wi-Fi antenna (2.4 & 5 GHz) for Seeker MCA III units. Includes 12 foot coaxial cable for remote mounting.
Mini-USB Power/Data Cable (I/O-20)
Charge & data cable for the Seeker, Seeker SE, Seeker D, Seeker D Lite, 120 DSP, and 802 AWE with Type-A USB plug to Mini USB plug.
Seeker MCA II & Seeker MCA III to Mobile Mount Power & Data Cable
Power & data cable used to connect the Seeker MCA II & Seeker MCA III to the Seeker & Seeker D Mobile Mounts.