跳转到主要内容
  • 投资者关系
  • 合作伙伴
  • 博客
  • 与我们联系
后退
  • United States
  • 中国
  • 日本
  • Brasil
  • СНГ
  • Deutschland
  • España
  • France
  • United Kingdom
  • Mexico
VIAVI Solutions
后退
  • United States
  • 中国
  • 日本
  • Brasil
  • СНГ
  • Deutschland
  • España
  • France
  • United Kingdom
  • Mexico
Search icon
    • 实验室及制造
      • 实验室及制造
        • 应用程序仿真
        • Automation and Orchestration
        • UE 仿真
        • 云 UE 仿真
        • 核心仿真
        • 核心测试
        • O-CU 模拟器
        • O-CU 测试
        • O-DU 测试
        • O-RU 测试
        • RIC 测试
        • 安全验证
        • 测试即服务 (TaaS)
        • 以太网测试
        • 高速网络
        • 光学制造测试平台
      • 存储网络测试
        • 存储网络测试
        • PCIe 测试设备
        • SAS 和 SATA
        • 光纤通道、以太网、FCoE、NVMeof
        • 协议测试
        • 试验器和生成器
        • 干扰器
    • 网络部署和维护
      • 网络部署和维护
        • 天线校准和监测
        • 资产和数据管理
        • 基站安装与维护
        • 电缆和天线分析仪
        • 干扰侦测
        • 射频分析
      • 光纤
        • 光纤
        • 资产和数据管理
        • 衰减器
        • 比特误码率
        • 铜缆、DSL、WIFI 和宽带测试
        • DOCSIS 测试
        • 光纤测试仪
        • 以太网测试
        • OTDR 和光纤特征分析
        • 光纤识别仪
        • 光纤端面检测和清洁
        • 故障定位仪
        • 光纤传感器
        • 光纤光源
      • 光纤
        • 光纤
        • HFC 测试
        • MPO 测试设备
        • 光万用表
        • 功率计
        • 光谱分析
        • OTDR 测试
        • PON 测试
        • 光纤监控
        • 虚拟测试和激活
        • AIOps
        • Core Network Assurance
        • 以太网保障
        • RAN Assurance
        • 光纤监控
      • 服务保障
        • 服务保障
        • 5G 保障
        • AIOps
        • 光纤服务保障
        • HFC/有线服务保障
        • 以太网
      • 实验室及制造
        • 实验室及制造
        • Automation and Orchestration
        • 云 UE 仿真
        • 核心仿真
        • 核心测试
        • O-CU 模拟器
        • O-CU 测试
        • O-DU 测试
        • O-RU 测试
        • RIC 测试
        • 安全验证
        • Network APIs
        • 资产和数据管理
        • 光纤监控
        • 虚拟测试和激活
        • AIOps
        • 以太网保障
        • 光纤监控
    • 铁路和关键应用
      • 铁路和关键应用
      • Drive Test
      • ERTMS and FRMCS Monitoring
      • Mission Critical Assurance
      • Railway Cybersecurity
      • 性能和威胁可见性
        • 性能和威胁可见性
        • 最终用户体验
        • 丰富的流量收集
        • 数据包分析
        • 数据包捕获收集
        • 数据包元数据收集
      • 测试和认证
        • 测试和认证
        • 比特误码率
        • 以太网测试
        • 光纤识别仪
        • 光纤端面检测和清洁
        • 光纤传感器
        • MPO 测试设备
        • 功率计
    • 陆地移动和军用无线电
      • 陆地移动和军用无线电
      • Communications Service Monitors
      • 陆地移动无线电测试
      • 军用无线电测试
      • 模块化仪器
      • 软件定义的无线电和系统
    • 航空电子设备
      • 航空电子设备
      • ADS-B 合规性
      • 飞机燃油量测试装置和接口
      • 天线耦合器
      • 测距设备 (DME)
      • 光纤航空电子设备
      • GPS 模拟
      • 军用航空电子设备
      • 模块化仪器
      • 导航和通信
      • 无线电高度表 (RADALT)
      • 射频自动测试设备 (RF ATE) 系统
      • 战术空中导航系统 (TACAN)
      • 交通防撞系统 (TCAS)
      • 应答器和询问器
    • 位置、导航和计时
      • 位置、导航和计时
      • GNSS Disciplined Oscillators
      • GNSS/GEO/LEO Grandmaster Clocks
      • GNSS/GEO/LEO Receiver Modules
      • GPS Simulator
      • RF Transcoder
      • Resilient GEO/LEO Timing Services
    • Custom Optics and Pigments
      • Custom Optics and Pigments
      • 定制光学器件
        • 定制光学器件
        • 定制滤光器
        • 光整形光学器件
        • MicroNIR 光谱仪
      • 颜料
        • 颜料
        • 品牌保护
        • ChromaFlair 颜料
        • 安全颜料
        • SpectraFlair 颜料
    • 所有产品
      • 所有产品
      • 所有产品
      • 产品系列
      • 停产的产品
    • 服务
      • 服务
      • Care Support Plans
      • 翻新设备
      • 维修和校准
      • 系统维护和合同
      • 培训
      • VIAVI Automated Lab-as-a-Service for Open RAN (VALOR)
      • 如何订购服务
      • 无线
        • 无线
        • 5G 解决方案
        • 5G 安全性
        • 定时和同步
        • 6G Forward
        • AIOps
        • Automated Lab-as-a-Service for Open RAN
        • 基站安装
        • 基于云的测试
        • 干扰侦测
        • MU-MIMO Test
        • 网络数字孪生
        • 非地面网络
        • 开放式 RAN (O-RAN)
        • 5G 专网
        • RAN Intelligence Solutions
      • 有线
        • 有线
        • AIOps
        • DWDM
        • 以太网业务激活测试
        • 光纤建设
        • 光纤监控
        • 光纤网络解决方案
        • 光纤传感
        • FTTx
        • HFC Network Test
        • MPO 连接器测试
        • PON 解决方案
        • Rural Broadband
        • 测试流程自动化 (TPA)
        • 传输网络运营
        • 超大规模
        • 数据中心互连
        • MPO 连接器测试
        • 第 1 层(基本)光纤认证
        • 第 2 层(扩展)光纤认证
    • 网络设备制造商
      • 网络设备制造商
        • 5G 安全性
        • 5G 网络设备制造商
        • 6G Forward
        • 分析支持
        • 基于云的测试
        • Non-Terrestrial Networks
        • Open RAN Security Test
        • O-RU Commercialization
        • 5G 专网
        • Coherent Optics Testing
        • 现场部署
        • 可扩展制造
        • 技术和服务介绍
        • 测试和开发
      • AIOps
      • Fiber Sensing
      • 开放式 RAN (O-RAN)
      • 5G 专网
      • Public Safety
      • 适用于运营经理的解决方案
      • 测试流程自动化 (TPA)
      • 网络安全性
        • Open RAN Security Test
        • VPN 管理解决方案
        • 网络安全性
        • Fiber Sensing
    • 政府与国防
      • 政府与国防
        • Electromagnetic Warfare
        • 光学涂层和滤光器
        • Military Aviation Testing
        • Payload & Device Optical Elements
        • Radar
        • Research, Development and Manufacturing
        • Secure and Reliable Communications
        • Spectrum Monitoring and Signal Analysis
        • 光学涂层和滤光器
        • 5G 专网
        • Public Safety
        • Secure and Reliable Communications
        • 通用航空
    • 企业和数据中心
      • 企业和数据中心
        • Cloud Monitoring
        • 最终用户体验监控
        • 网络性能监控
        • 5G 专网
        • Unified Communications
        • 网络安全性
        • Cloud Workflow Management
        • 数据中心互连
        • 以太网业务激活测试
        • 光纤和铜缆测试及认证
        • MPO 连接器测试
        • 第 1 层(基本)光纤认证
        • 第 2 层(扩展)光纤认证
        • WAN 性能测试
        • Fiber Monitoring
        • Fiber Sensing
        • 电力运营商
        • Fiber Monitoring
        • Fiber Sensing
        • Fiber Monitoring
        • Fiber Sensing
    • 承包商
      • 承包商
      • 基站安装和调试
      • Data Center Contractor Solutions
      • 光纤和铜缆测试及认证
      • 家用宽带业务安装
      • 适用于现场技术人员的解决方案
      • 适用于安装人员的解决方案
      • 适用于运营经理的解决方案
      • 测试流程自动化 (TPA)
    • 定制光学元件和颜料
      • 定制光学元件和颜料
      • 三维传感
      • 防伪
      • 汽车
      • Biomedical Applications
      • 消费电子
      • 定制色彩解决方案
      • 政府/航空航天
      • 工業用
      • 近红外光谱
      • 光谱传感
  • 购买方式
    • 请求报价
    • 样机需求
    • 订单状态
    • 与我们联系
    • 租用设备
    • 融资方案
    • 如何订购
    • 如何订购服务
    • 查找合作伙伴
    • 翻新设备
  • 资源
    • 学习中心
      • 学习中心
      • What are Cloud Solutions?
      • What is 5G Energy Consumption?
      • 什么是 5G 测试?
      • What is a Hyperscale Data Center? (简体中文)
      • 什么是数据中心互连?
      • 什么是光纤端面检测?
      • What is Fiber Optic Sensing?
      • 什么是光纤测试?
      • 什么是光纤监控?
      • 什么是无源光网络 (PON)?
      • 什么是 XGS-PON?
      • What is RF Interference?
      • View All Topics
    • 产品库
    • 博客
    • Subscription Center
    • 视频库
    • 网络研讨会
    • 客户支持
      • 客户支持
      • 客户服务门户
      • 客户服务
      • 技术支持门户
      • 退货授权(RMA)
      • 操作方法视频
      • 知识库
      • 快速参考卡和技术提示
      • 软件下载
      • 保修条款和条件
    • 关于我们
      • 关于我们
      • 奖项和荣誉
      • Environment, Social, and Governance (ESG)
      • 领导层
      • 地点
      • Together with VIAVI
    • 职业
      • 职业
      • Career Paths
      • 搜索和应用
      • Early-Career Program
      • Life at VIAVI
      • 福利和奖励
      • Events
      • 新闻报道
      • 新闻稿
      • 博客
      • Subscription Center
    • 合作伙伴
      • 合作伙伴
      • 查找合作伙伴
      • Partner Portal Login
      • Compliance
      • Data Privacy and Data Security
      • Patents
      • 政策和标准
      • 隐私政策
      • Terms and Conditions
      • Terms of Use
    • 与我们联系
Search icon
  1. 首页
  2. 资源
  3. 学习中心

What is EMF?

  • What Is EMF Radiation?
  • Why Perform EMF Tests?   
  • Ionizing Radiation
  • EMF Theory Antennas
  • Challenges in EMF Radiation Testing    
  • VIAVI OneAdvisor 800 EMF Analyzer
  • Contact an Expert

An electromagnetic field (EMF) is formed by the interaction between electric and magnetic fields. When these two energy fields oscillate perpendicular to one another, it results in electromagnetic waves that propagate through space. While radio (RF) waves are the most familiar form of EMF, since they are used to transmit Wi-Fi, TV, and mobile device signals, EMF is also common to power generators and medical imaging technologies such as magnetic resonance imaging (MRI). 

The dynamic energy formed by electromagnetic fields is known as EMF radiation. This general description includes a broad spectrum of wavelengths and frequencies, with the RF signals that underpin cellular networks found between 600 MHz and 39 GHz, well below the frequency of visible or ultraviolet (UV) light. 5G mmWave signals utilizing frequencies up to 100 GHz are expanding the upper limits of this range.

Depending on the frequency, EMF radiation can be either non-ionizing or ionizing, with ionizing EMF capable of alter cellular structures, including DNA. While the non-ionizing radiation from power lines, cell phones, and microwave ovens is considered safe at low exposure levels, high-energy ionizing radiation from sources including X-rays and gamma rays presents a greater risk to the ecosystem and human health.

EMF Measurement

The magnitude of EMF radiation can be measured using an EMF tester equipped with a probe or isotropic antenna that detects the field intensity within a given area. EMF measurements of electrical energy, typically in volts per meter (V/m), magnetic field strength in milligauss (mG) and spectrum analysis (frequency) readings combine to paint a complete picture of EMF behavior. Radiation exposure levels can also be determined by measuring the power density in watts per square meter (W/m²). Testing processes for wireless networks often includes a pre-programmed comparison of EMF levels to standardized permissible limits.

The primary objective of electromagnetic testing is to safeguard public health and prevent any harm to humans or the environment. The best way to accomplish this is by setting limits for exposure levels, then performing monitoring to ensure this is being achieved. The International Commission on Non-Ionizing Radiation Protection (ICNIRP) has established limits for acceptable EMF emission levels that serve as a basis for field testing. 

These standards for EMF harmful levels are relevant to wireless communication in general, and 5G in particular, with base stations emitting radiofrequency electromagnetic fields (RF EMF) ranging from several hundred MHz to several GHz. Despite the higher frequencies and cell densities, there is no evidence linking 5G to health risks. However, assuaging public and private concerns is one of the fundamental reasons for ongoing electromagnetic field testing.

EMF Test Methodologies

The radios deployed in cell sites must comply with standards defined by regulators and government agencies including ICNIRP, IEEE, ARPANA and the Federal Communication Commission (FCC). There are several standard EMF test methodologies in use, along with options that allow data to be interpolated or augmented to paint a more complete picture. 

  • Broadband: As the name implies, EMF detection methods and test devices in the broadband category perform EMF measurements across a wide range of frequencies. These devices are used to assess overall EMF exposure but are not sensitive enough to determine the potential sources and types of EMF. This shortcoming makes broadband methods less suitable for 5G network testing.  
  • Frequency selective and code selective: Spectrum-based (frequency selective) methods measure power in the band where the signal of interest is transmitting. This method is commonly used to evaluate all types of radio technologies. Beam-based (code selective) EMF testers utilize demodulation to isolate the contribution of each carrier, cell, and beam. This method is especially useful for measuring the maximum EMF levels produced through 5G beamforming. 
  • Extrapolation: When direct EMF inspection and testing is not feasible, or beam power levels are not consistent, extrapolation methods can be used to predict the maximum exposure levels expected from an EMF source. Extrapolation is also used to assess the power of a fully occupied 5G channel based on the emissions of pilot signals. To perform these tests correctly, traffic beams must be aimed directly at the electromagnetic field detector.  

Ionizing radiation is defined as any EMF emission exceeding 300 GHz, making it capable of removing electrons from atoms to create ions. This process can disrupt molecular bonds in biological tissues with potentially serious health consequences when too much radiation absorbed. 5G base stations, cell towers, and other wireless communication infrastructure does not produce ionizing radiation

  • Examples of ionizing radiation: Along with X-rays and Gamma rays, ionizing radiation comes from sources including nuclear reactions, high-energy solar flares, and particle accelerators. Safe applications of ionizing radiation include essential diagnostic medical procedures like CT scans and PET scans.

  • Measuring ionizing radiation: Ionizing radiation is measured using specialized devices like Geiger counters capable of counting ion pairs within the detector and interpreting that data to determine the amount of radiation. Instruments like scintillation detectors can measure both the energy and intensity of the radiation.

  • Ionizing vs non-ionizing radiation: Non-ionizing radiation creates a much lower energy output, but it is still capable of producing heating effects. Non-ionizing RF fields can penetrate the human body, but the depth of penetration becomes lower as the frequency gets higher.  

Antennas play a key role in measuring and testing for electromagnetic radiation in 5G networks and other wireless systems. By directly interacting with EMF waves, devices with integrated antennas can assess how the waves are propagating through the environment and affecting communication systems and users.

Isotropic antennas: 
An isotropic antenna is a theoretical antenna that receives energy in all directions with the same sensitivity. In practical application, this hypothetical concept is turned into reality by combining three antennas (one each for the X, Y, and Z axis’) within a single form factor. The global field strength is calculated by taking the quadratic sum of all three antennas. 

Directional antennas: 
These antennas can only send or receive EMF energy in one direction. This limits the collection of EMF waves to a much narrower pattern, but directional antennas do offer higher gain, meaning they can receive signals from further distances. This makes directional antennas useful for testing for electromagnetic radiation from a fixed source, such as a cell tower.  

Radiation patterns of isotropic antennas: 
Both isotropic and directional antennas are characterized by their radiation patterns, either through the E-Plane (vertical), H-Plane (horizontal), or 3-axis dimensions. The radiation patterns are equivalent in the transmitting and receiving dimensions which makes it easier to interpret received signals during EMF testing. 

Testing for electromagnetic radiation in wireless networks has always been challenging, with vast geographic areas to assess and external satellites, radar, and microwave systems making it difficult to pinpoint the true source of EMF. 5G brings additional challenges, with higher frequencies, beamforming, and cell densification bringing more attention to 5G EMF testing from government agencies:

  • 5G Time Division Duplex (TDD): In 5G NR TDD, beams are delivered in different time slots and power levels. This makes it necessary to measure the profile of each beam throughout the entire channel bandwidth and interpret the results to obtain the total emissions. This complexity requires more advanced test solutions than were required for previous wireless generations.
  • Tighter requirements: Despite generating non-harmful levels of non-ionizing EMF, the advent of 5G has increased fears over health impacts. Several markets have tightened requirements and made it difficult to provide 5G-only service. Electromagnetic radiation measurement and reporting against national and local standards is mandatory for mobile operators in several countries.
  • User traffic dependency: Unlike previous generations of wireless technology where signals were radially transmitted with a consistent EMF signature, 5G RAN selectively transmits to users, leading to continuous fluctuation in EMF levels. To factor in this variation while fairly assessing the dangers of electromagnetic radiation in each area, new 5G EMF testing methods have been developed and validated. 

The VIAVI OneAdvisor 800 platform provides the flexibility needed to address 5G testing challenges in the wireless, transport, and fiber categories. The OneAdvisor 800 EMF analyzer is a cost-effective solution for 5G electromagnetic radiation measurement for frequencies up to 44 GHz. The solution offers customizable EMF limits based on relevant standards that can be saved for continued use.

  • Radiation and emissions measurement: In the EMF spectrum mode, the OneAdvisor 800 EMF tester measures the aggregate energy of all radio signals in the selected band. The frequency-selective EMF Scanner mode is used to measure emissions from individual channels and identify those contributing to higher EMF. System test time is configurable from 1 to 60 minutes.
  • RAN measurement capabilities: The solution also includes a code selective electromagnetic testing mode capable of advanced 5G RAN beam analysis. The EMF power of 5G control beams over multiple PCIs is used to find the maximum power of the entire 5G channel width. This method also allows for simultaneous EMF measurements of traffic (user) beams to assess all impact of EMF emissions on users more accurately.
  • RF field strength measurement: OneAdvisor 800 EMF Analyzer detects the field strength of radio signals over the air using the built-in isotropic antenna. Electric field strength is measured in Volts/meter while magnetic field strength is measured is Amps/meter.

VIAVI has leveraged decades of wireless network testing expertise to develop the ideal EMF field test solution for radio access networks. VIAVI OneAdvisor 800 EMF supports measurement references based on ICNIRP, ARPANSA, BGV, FCC, IEEE, Italy CM, and Safety Code 6 limits. 
 

Products

  • OneAdvisor 800 无线平台

Related Links

  • 5G 解决方案
  • 基站安装和调试
  • 干扰侦测
公司
  • 关于我们
  • 招贤纳士
  • 投资者关系
  • 新闻稿
  • 合作伙伴
  • 社会责任
专业技术领域
  • 3D 传感
  • 5G 测试
  • 光纤
  • 服务保障
  • 航空电子设备
支持
  • 客户服务
  • 技术支持
  • 支持门户
  • 维修和校准
  • 软件下载
购买方式
  • 请求报价
  • 联系销售人员
  • 查找合作伙伴
  • 订单状态
viavi logo
  • Facebook
  • Instagram
  • LinkedIn
  • Twitter
  • YouTube
Subscription Center

© 2025 VIAVI Solutions Inc.

  • 饼干偏好
  • 与我们联系
  • 站点地图
  • 法律
  • 隐私政策
  • 技术支持
  • 退货授权(RMA)
  • 请求报价
  • 查找合作伙伴
  • 客户服务门户
  • 与我们联系