MAP PCT 插入损耗 (IL) 和回波损耗 (RL) 测试模块 (mORL)

用于 MAP 系列平台的无源元件测试 (PCT) 应用 LightDirect 模块

单模插入损耗/回波损耗测试仪和完全符合 EF 标准的多模插入损耗测试模块可在 VIAVI 高级 MAP 系列平台上使用。

MAP PCT IL and RL Test Modules (mORL-A1

光学连接解决方案(光连接器、结构化布线、分光器和外面的外壳)是连接密集的中央办公室、数据中心和光配送网络的核心。除电信、数据通信、无线回程和 FTTx 外,新的超级计算机应用也随着不断增长的航海、航空和军事应用而出现。所有这些市场都对带宽有着更高的需求。出于降低安装成本和快速部署等需求,市场上出现了新型连接器格型式。

但这些连接点的质量和光学性能却经常被忽视。较差的插入和回波损耗(IL 和 RL)会对网络性能产生长期严重的影响。性能差会直接影响传送率、可靠性,甚至会妨碍技术升级。同时,经济因素要求制造商继续降低成本、加速生产并加快上市时间。

VIAVI 无源器件/连接器测试解决方案 (PCT) 由一组功能强大的模块、软件和外围设备组成,可测试光连接产品的插入损耗、回波损耗、物理长度以及极性。利用 VIAVI MAP 系列平台的模块化和连通性,PCT 可针对研发、生产或验收测试环境进行配置,并支持从单模到 OM1 和 OM4 的所有主要光纤类型的测试。

mORL 通常与光开关 (mOSW/mISW) 和远程光功率计 (mOPM) 模块结合使用。

注释:通过确保 VIAVI PCT 始终以最佳状态运行来保护您的投资。VIAVI 提供多种 PCT 校准服务选项,旨在满足不同客户的需求。

优势

  • 生产效率提高 4 倍
  • 与其他解决方案相比只需要 25% 的空间
  • 可扩展到新高速增长、高性能应用,如 40/100G 数据中心市场
  • 模组化平台可根据需求和预算进行扩展
  • 端口映射可在 15 秒内验证多纤芯 MPO 盒的连通性和极性
  • 完全支持高速增长的 MPO 和 MTP 多纤芯连接器

应用

  • 测试光连接器和线缆组件,结构化布线解决方案,以及分光器的IL/RL/长度,
  • 自动测试多纤芯器件,例如 MPO
  • 单模和多模光纤器件的解决方案
  • 验证大型多纤芯器件的连通性和极性
  • 测量线卡和光收发模块的 RL

服务

Instrument Care Support Plans

Save up the 50% of standard service prices and obtain priority service when you buy a bundled plan at the same time the instrument is purchased. Care Support Plans offer the best way to purchase extended warranty, premium technical support, self-paced training, and critical maintenance services like calibration services that include software and engineering change order update services to ensure your product is maintained with current software and a calibration certificate. These discounted plans are 2-5 years long when purchased upfront with your VIAVI instruments.


VIAVI Care 支持

服务BronzeCareSilverCareMaxCareGoldCareFleetCare
 BronzeCareSilverCareMaxCareGoldCareFleetCare
技术支持高级版高级版高级版高级版高级版
工厂维修

标准服务 + 定制菜单:
 现场校准和培训,FAE 天数,
自定义工程或软件订阅

优先服务
自定进度的培训

5 年电池和包覆盖 *

 
工厂校准 

配件覆盖

  
备机借用  
* 仅限 5 年计划;如果适用

电池/包覆盖
电池和包会随着日常使用和充电周期而磨损。为了确保这些项目不会拖累您,我们的 5 年计划包括在您的 5 年计划的整个生命周期内进行更换。

在为期 5 年的 SilverCare 或 MaxCare 支持计划期间,VIAVI 将提供一次更换损坏的电池和磨损的软包/手套的服务。只有当仪器被送回 VIAVI 进行维修或校准服务时,才会更换该仪器。硬箱排除在外,覆盖不适用于不带包/电池销售的仪器。

此覆盖包括在 5 年 Silver 和 MaxCare 计划中

MaxCare 配件更换覆盖
仪器产品配有配件电缆和连接器端子。为了确保可靠、准确的测试,我们将每年更换一个配件,以确保良好的测试结果。

当配件被确定为有缺陷或有故障时,VIAVI 将免费为客户修理配件或根据 VIAVI 的判断进行更换。更换的配件可能是新的,也可能是翻新的。所有退回的配件归 VIAVI 所有。适用以下限制:每 12 个月内可更换的配件最多为一个;适用的配件仅包括那些被认为对仪器运行至关重要且随原始购买产品一起发货的附件。如果存在问题,或者在校准或维修服务事件期间,客户有责任将有故障的附件寄回 VIAVI。

备机借用
现在您无需停机便可安排校准或维修。备机借用服务可在您将设备送去校准或进行突发性检修时向您出借类似配置的设备。


Care 支持计划 - MAP

Care Support Plan - MAP

产品类型推荐计划BronzeCare
BronzeCare
SilverCare
SilverCare
MaxCare
MaxCare
为什么要校准?
MAP (Mainframe/Module)Bronze-3

为什么要校准这个产品?
有哪些常见问题?

Factory standards to ensure accuracy MAP

Why calibrate this product?

It is essential in manufacturing environment to ensure your product meets the published/customer requirements. Having accurate measurements ensures highest possible yields whilst maintaining product specifications. Ensuring all that the optical test equipment is performing as designed and calibrated is requirement in achieving that goal.

Viavi will validate measurement accuracies conform to published specifications.

Maintain connectors and pigtails.

Factory standards to ensure accuracy

VIAVI is a TL9000 company and calibrates this instrument based on general requirements for the competence of calibration and testing laboratories (ISO/IEC 17025:2005) to ensure your instrument is certified to measure accurately. Instruments that are out of calibration will produce unreliable measurements and can create false passing or false failing test results that often cause your team repeat work. We maintain, polish and clean all fiber connectors, fix pigtail connections that are internal to the product to ensure all parts stay in good working order and upgrade software / firmware to the latest approved release to enable enhancements. VIAVI Care Plans are the most cost-effective way to plan for calibration with a low, discounted price at the time of instrument purchase.  Fixed rate calibration can also be purchased later via a separate purchase order.

  • Ensure accurate measurements that meet design expectations and optical budgets.
  • Maintain ports and connectors to keep signals working properly and to extend the life of the instrument. For example, if optical connectors or lasers are bad or interface ports are loose then after repeated connection cycles, optical measurements may be inaccurate or damage may occur.
  • When manufacturing optical network products, accurate, reliable and repeatable optical measurement performance is essential to compliance with published/committed product specifications
  • Know that optical product design, product manufacturing and customer expectations are accurate and in alignment throughout product lifecycle

Most business common implications MAP

How will my measurements be affected if the product is out of calibration?

Inaccurate measurements may prevent verification of power levels or introduce other measurement uncertainties, errors and artifacts. Out-of-calibration instruments can result in design errors, production problems, end customer escalations, increased failure rates, audit non-compliance or even ultimately loss of business. 

What are the most common implications of these issues to the business?

  • Uncalibrated tools produce unreliable measurement results that can't be certified to specifications and may violate product agreements or ISO/TL9000 standards with your customers and their network equipment vendors.

  • Design errors resulting from inaccurate measurements can result in ongoing issues throughout the product lifecycle including poor yields, inaccurate optical budgets, increased return rates  and customer expectation mismatch.

  • Production costs can be elevated by increased re-work, reduced yield and inconsistencies between measurements.

Common Business impacts include:

  • Lost revenue, customer complaints and increased costs.
  • Quality audit failures.
  • For end customers, repeat product quality issues with vendors often cause added cost, customer dissatisfaction and loss of business.

 


VIAVI Care Support for Existing Equipment

FleetCare
FleetCare

FleetCare plans can be customized to include any service entitlements on your fleet of existing equipment. Please fill out a Service Contracts form for a quote.

  • Any collection instruments with a single coterminous renewal date
  • Each contract is customized with any number of annual terms required by the customer
  • Onsite Calibration, Training, Field Application Engineer days can be added

View Support Plans For Existing Equipment


Repair and Calibration

Our products live in rugged environments for over 10 years with 1000s of test connect/disconnect cycles.  We will be there to support you to ensure components that require maintenance like connectors, batteries, and software updates to ensure you are ready to test accurately for years to come. We apply factory procedures that use fast, automated calibration and functional verification, maintenance using OEM parts and the application of all engineering change orders and software updates. Services are available through contract Care plans, FleetCare or per incident as requests. 

Top 4 Reasons to Choose VIAVI for Your Repair and Calibration Needs:

  • Minimize business disruption
  • Budget
  • Measurement Accuracy and Product Reliability
  • Measurement Compliance, TL9000 certification and OEM Standards

Explore More


如何开始

对产品演示感兴趣? 请与我们联系以了解详细信息、获取报价或者了解如何购买。