CellAdvisor 5G

行业最全面的基站测试解决方案

VIAVI CellAdvisor 5G 是用于对 5G 基站部署、维护和管理的各个方面进行验证的理想现场便携式解决方案。

VIAVI CellAdvisor 5G 是行业最易于使用、最具创新性并且功能最全面的基站分析仪。它是用于验证和部署 5G 无线接入网络的理想现场便携式解决方案。它不仅具备实时频谱分析和 5G 波束分析功能，而且还结合了光纤、同轴电缆和空中接口测试能力，使其成为了功能最全面的基站测试解决方案。不管是您是执行信号分析、干扰分析还是仅仅检测光纤连接，这款仪器都能包办一切。它易于使用的界面，再辅以支持云的 VIAVI StrataSync，您将能易如反掌地创建报告和快速结束项目。

优点：

充满信心地验证和部署所有物理接口（光纤、同轴电缆和射频）
可使用软件许可证升级到新功能和技术，让您的总体拥有成本达到最佳
利用同一解决方案既可执行 PIM 检测，还能进行干扰分析和侦测
只需按下按钮便可生成报告，并快速获得报酬

应用：

5G 基站安装、调试和维护
大规模天线阵列和有源天线波束验证
基于 CPRI 的干扰分析和 PIM 检测
全面射频信号分析
基于 CPRI 的前传和 RRH 验证

主要特点：

可对 5G FR1（6GHz 以下）和 FR2 (mmWave) 进行实时频谱分析和干扰分析及持久性显示
5G 载波扫描仪可测量多达 8 个宽频带载波的功率，以及最强波束功率电平及其对应 ID
5G 波束分析仪可评估单个波束的 ID、其功率电平及对应的信噪比
5G 路径图可进行覆盖范围验证，实时映射波束强度并提供数据进行后处理

资料

应用指南

手册

案例研究

产品说明

海报

选择指南

服务

VIAVI Care 支持计划 (简体中文)

白皮书和书籍

视频

网络研讨会

Care Support Plans

Product Group	Recommend Plan	Bronze	Silver	Maxcare	Why Calibrate?
CellAdvisor 5G (CA5000)	Silver-5				Spectrum analyzers are measuring frequencies which need to be accurate to meet the specifications. Factory standards to ensure accuracy VIAVI Calibrates to TL9000 factory standards to ensure your instrument is certified to measure accurately, as it did when it came off the factory line. Instruments that are out of calibration will produce unreliable measurements and can create false passing or false failing test results that often cause your team repeat work. We maintain, polish and clean all fiber connectors, fix pigtail connections that are internal to the product to ensure all ports stay in good working order and upgrade software / firmware to the latest approved release to enable enhancements. VIAVI Care Plans are the most cost-effective way to plan for calibration with a low, discounted price at the time of instrument purchase, however fixed rate calibration can be purchased at a later date on a separate purchase order. Ensure accurate measurements that meet calibration and service level agreements, ISO and TL standards for network test procedures. Ensure all test transmission signals work properly to avoid issues such as not reaching full line rate testing rate required to validate service bandwidth, speed and quality of service (QoS). Maintain ports and connectors to keep test transmissions working properly and to extend the life of the instrument. For example, if optical connectors and, lasers are bad or electrical/RF interface ports are loose after years of connection cycles, OTDR, TDR, and Radio Frequency measurements will not work properly. When doing construction, installation and activation work that must be certified, all network components typically must be tested with a certified, calibrated instrument to preserve warranty from manufacturer, such as fiber optic cable manufactures. Accurate RF frequencies and optical wavelengths are critical to meet measurement specifications. If using these to validate network elements, power levels, transmission rates, out of specification tools will prevent validation of network elements and signals. Why calibrate this product? Repeat truck rolls due to repeated measurements Erroneous measurements might result in the incorrect network settings. Adds time to troubleshooting because the real issue it is not possible to isolate the real issue. What are the most common implications of these issues to the business? Uncalibrated tools produce unreliable measurement results that can't be certified to specifications and may violate service level agreements or ISO/TL9000 standards with your customers and their network equipment vendors. QoS certification may be inaccurate and generate a repeat test need. Contractors are often not compensated or could be delisted as an approved service supplier due to incorrect results. Full manufacturer warranty (20-30 years) from cable suppliers (e.g. Corning, CommScope, Belden, ect.) will only be granted if the installation is certified with a calibrated instrument, thus the network owner is motivated to comply with correct installation certification procedures to retain and enforce the warranty on expensive cabling and optical network elements, etc. Common Business impacts include: Lost revenue, customer complaints and increased costs: Most network operators track and audit repeat work done by sub-contractors and often there is a billing dispute in these cases. Contractors with high rates of inaccurate test results are usually hired for less or not at all when not meeting SLA agreements or quality metrics. For Network Operators, repeat service quality issues with customers often causes added cost, customer dissatisfaction and loss of business. Example: Let's look at OTN/SONET/SDH/E1/T1 and various FTTX, DOCIS and xDSL measurements. It is critical to reach full line rate (1G, 10G, 40G, 100G) to test service performance and service error rates. If the uncalibrated tester can not reach full line rate during testing, a customer may be left with suboptimal performance that will quickly create complaints or alternatively, the technician could end up chasing phantom network problems that do not exist. What are the common issues?

VIAVI Care 支持

服务	BronzeCare	SilverCare	MaxCare	GoldCare	FleetCare
	图像	图像	图像	图像	图像
技术支持	高级版	高级版	高级版	高级版	高级版
工厂维修				标准服务 + 定制菜单：现场校准和培训，FAE 天数，自定义工程或软件订阅
优先服务
自定进度的培训
5 年电池和包覆盖 *
工厂校准
配件覆盖
备机借用

* 仅限 5 年计划；如果适用

电池/包覆盖
电池和包会随着日常使用和充电周期而磨损。为了确保这些项目不会拖累您，我们的 5 年计划包括在您的 5 年计划的整个生命周期内进行更换。

在为期 5 年的 SilverCare 或 MaxCare 支持计划期间，VIAVI 将提供一次更换损坏的电池和磨损的软包/手套的服务。只有当仪器被送回 VIAVI 进行维修或校准服务时，才会更换该仪器。硬箱排除在外，覆盖不适用于不带包/电池销售的仪器。

此覆盖包括在 5 年 Silver 和 MaxCare 计划中

MaxCare 配件更换覆盖
仪器产品配有配件电缆和连接器端子。为了确保可靠、准确的测试，我们将每年更换一个配件，以确保良好的测试结果。

当配件被确定为有缺陷或有故障时，VIAVI 将免费为客户修理配件或根据 VIAVI 的判断进行更换。更换的配件可能是新的，也可能是翻新的。所有退回的配件归 VIAVI 所有。适用以下限制：每 12 个月内可更换的配件最多为一个；适用的配件仅包括那些被认为对仪器运行至关重要且随原始购买产品一起发货的附件。如果存在问题，或者在校准或维修服务事件期间，客户有责任将有故障的附件寄回 VIAVI。

备机借用
现在您无需停机便可安排校准或维修。备机借用服务可在您将设备送去校准或进行突发性检修时向您出借类似配置的设备。

VIAVI Care Support for Existing Equipment

FleetCare

FleetCare plans can be customized to include any service entitlements on your fleet of existing equipment. Please fill out a Service Contracts form for a quote.

Any collection instruments with a single coterminous renewal date
Each contract is customized with any number of annual terms required by the customer
Onsite Calibration, Training, Field Application Engineer days can be added

View Brochure

Repair and Calibration
Our products live in rugged environments for over 10 years with 1000s of test connect/disconnect cycles. We will be there to support you to ensure components that require maintenance like connectors, batteries, and software updates to ensure you are ready to test accurately for years to come. We apply factory procedures that use fast, automated calibration and functional verification, maintenance using OEM parts and the application of all engineering change orders and software updates. Services are available through contract Care plans, FleetCare or per incident as requests.

Top 4 Reasons to Choose VIAVI for Your Repair and Calibration Needs:
- Minimize business disruption
- Budget
- Measurement Accuracy and Product Reliability
- Measurement Compliance, TL9000 certification and OEM Standards
Explore More

Training Courses

This course provides a self-paced certification exam for technicians and/or users who already have practical experience using the CellAdvisor Cable and Antenna Analyzer (or similar product) and are required to have a Certification.

Course Number

TT-CAA-EXAM-SP

期限

90 分钟

Locations

Global

语言

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of the physical design and features of the CellAdvisor 5G Platform product. Learn about the key testing applications including Over the Air (OTA) measurements and Fronthaul Verifications as well as Workflow Automation applications.

Course Number

TT-CA5G-OVRVW-SP

期限

22 分钟

Locations

Global

语言

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of how to set up the Beam Analysis application on the CellAdvisor 5G test set. Learn how to launch, perform, and save Beam Analysis test results for the beam forming verification.

Course Number

TT-CA5G-BEAM-SP

期限

12 分钟

Locations

Global

语言

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of how to set up and perform the DriveTest Route Map Workflow process using the CellAdvisor 5G.

Course Number

TT-CA5G-DRVTST-WRKFLW-SP

期限

12 分钟

Locations

Global

语言

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of how to set up and perform the Carrier Scanner application on the CellAdvisor 5G test set for a 5G NR signal.

Course Number

TT-CA5G-CARRIERSCAN-SP

期限

11 分钟

Locations

Global

语言

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of how to set up and perform the WalkTest Route Map Workflow process using the CellAdvisor 5G.

Course Number

TT-CA5G-WLKTST-WRKFLW-SP

期限

12 分钟

Locations

Global

语言

English
Other languages available upon request

Type of Training Available

On-Site and Virtual Classroom
Self-Paced Online Training

This course presents an overview of how to set up and perform the WalkTest Route Map Workflow process using the CellAdvisor 5G.

Course Number

TT-CA5G-WLKTST-WRKFLW-SP

期限

12 分钟

Locations

Global

语言

English
Other languages available upon request

Type of Training Available

On-Site and Virtual Classroom
Self-Paced Online Training

This course presents an overview of how to enable the Remote VNC access on the CellAdvisor 5G test set. Learn how to download and install the SmartAccess Anywhere application on a device and how to launch remote control testing operations and file transfers.

Course Number

TT-CA5G-REMOTE-SAA-SP

期限

12 分钟

Locations

Global

语言

English
Other languages available upon request

Type of Training Available

On-Site and Virtual Classroom

每一阶段的支持

我们提供您所需的支持、服务、全面培训以及资源。这只是我们为最大程度提升您投资的价值所作努力的一部分。

我们倾力相助

我们倾力相助，为您获得成功加油。

CellAdvisor 5G

行业最全面的基站测试解决方案

概述

模块

DWDM OTDR 模块（4100 系列）

Nano OSA 模块（4100 系列）

Cable and Antenna Analyzer Modules (CAA06M)

新闻报道

VIAVI Solutions announces the redesign and update of its OTDR product range

Command The 5G Network: Advance 5G Deployment and Service Assurance with Comprehensive VIAVI RF Field Test Portfolio

Command The 5G Network: VIAVI Introduces 3D Geolocation for 5G Networks

OPTRONTEC Enters into a Licensing Agreement with VIAVI for 3D Sensing Filters

资源

服务

网络研讨会

视频

资料

应用指南

手册

案例研究

产品说明

海报

选择指南

服务

白皮书和书籍

视频

网络研讨会

服务

Care Support Plans

Factory standards to ensure accuracy

What are the most common implications of these issues to the business?

VIAVI Care 支持

VIAVI Care Support for Existing Equipment

Repair and Calibration

Training Courses

CellAdvisor Cable and Antenna Analyzer Technician Certification Exam

CellAdvisor 5G Platform Overview

CellAdvisor 5G Beam Forming Verification

CellAdvisor 5G DriveTest Route Map Workflow

CellAdvisor 5G Carrier Scanner Testing

CellAdvisor 5G WalkTest Route Map Workflow

CellAdvisor 5G WalkTest Route Map Workflow

CellAdvisor 5G Remote Support SmartAccess Anywhere

相关产品

DWDM OTDR 模块（4100 系列）

OTDR 模块（4100 系列）

每一阶段的支持

我们倾力相助