MAP C+L Band Optical Light Source Module (mBBS)

100 mW Amplified Emission Broadband Light Source LightDirect module for MAP Series Platform

The MAP Broadband Light Source (mBBS-C1) provides an amplified spontaneous emission (ASE) output that is ultra-stable, spectrally flattened and high-power density across the extended C-band and L-band.

The Multiple Application Platform (MAP) Broadband Source (mBBS-C1) is a third-generation erbium doped fiber-based design. The mBBS-C1 delivers 100mW of amplified spontaneous emission (ASE) across the extended C-band and the L-band.  The ultra-stable, depolarized optical output is spectrally flat to within 1.8dB and shows power stability better than 0.02dB. These characteristics make it ideal for several applications including noise loading during OSNR compliance test, power loading of optical amplifiers during gain, and noise figure measurements or passive component characterization. Due to extreme power stability, this source is often used for optical calibration of power meters and variable attenuators.

Highlights

  • >100mW depolarized output power over the extended C-band and the L-band
  • Power flatness < 1.8dB
  • Ultra-high power stability
  • LXI-compliant interfaces and IVI drivers

Applications

  • Source for optical component spectral tests
  • OSNR noise loading for receiver and systems compliance tests
  • Power loading for optical amplifier testing
  • Ultra-stable source for Optical calibration systems

Dienste

Instrument Care Support Plans

Save up the 50% of standard service prices and obtain priority service when you buy a bundled plan at the same time the instrument is purchased. Care Support Plans offer the best way to purchase extended warranty, premium technical support, self-paced training, and critical maintenance services like calibration services that include software and engineering change order update services to ensure your product is maintained with current software and a calibration certificate. These discounted plans are 2-5 years long when purchased upfront with your VIAVI instruments.


VIAVI Care Support

VIAVI Care Support

ServicesBronzeCareSilverCareMaxCareGoldCareFleetCare
 BronzeCareSilverCareMaxCareGoldCareFleetCare
Technische UnterstützungPremiumPremiumPremiumPremiumPremium
Werksreparatur

Standardleistungen + individuelle Auswahl:
 Vor-Ort-Kalibrierung und -Schulung, Serviceingenieur-Einsätze,
kundenspezifische Entwicklung oder Software-Wartungsverträge

Priorität im Servicefall
Online-Schulung

5 Jahre Batterie- und Taschenabsicherung*

 
Werkskalibrierung 

Zubehörabsicherung

  
Express-Leihgeräte  

* Nur 5-Jahres-Pläne


Care-Support-Pläne - MAP

ProduktEmpfohlener PlanBronzeCareSilverCareMaxCareWarum kalibrieren?
  BronzeCareSilverCareMaxCare 
MAP (Mainframe/Module)Silver-5Bronze-4
Bronze-5
Silver-4 
Silver-5
no

Warum dieses Produkt kalibrieren?
Welche Probleme können auftreten?

MAP Matrix Switch (OST, OSM, VST)Bronze-5

Bronze-2
Bronze-3
Bronze-4
Bronze-5

nono

Warum dieses Produkt kalibrieren?
Welche Probleme können auftreten?

MAP Tunable Source (mTLS)Silver-5Bronze-2
Bronze-3
Bronze-4
Bronze-5
Silver-2
Silver-3
Silver-4
Silver-5
no

Warum dieses Produkt kalibrieren?
Welche Probleme können auftreten?


Ordering VIAVI Care Plans

To order a VIAVI Care Plan, request the following part numbers in your service plan quote from the table below. Your care plan will be sold in annual increments.

BronzeCare
(Part Numbers)

BronzeCare
SilverCare
(Part Numbers)

SilverCare
MaxCare
(Part Numbers)

MaxCare
Years Serviced
Bronze-2Silver-2 First 2 Years
Bronze-3Silver-3MaxCare-3First 3 Years
Bronze-4Silver-4 First 4 Years
Bronze-5Silver-5MaxCare-5First 5 Years
FleetCare
FleetCare

FleetCare plans can be customized to include any service entitlements

  • Any collection instruments with a single coterminous renewal date
  • Each contract is customized with any number of annual terms required by the customer
  • Onsite Calibration, Training, Field Application Engineer days can be added

Repair & Calibration

Our products live in rugged environments for over 10 years with 1000s of test connect/disconnect cycles.  We will be there to support you to ensure components that require maintenance like connectors, batteries, and software updates to ensure you are ready to test accurately for years to come. We apply factory procedures that use fast, automated calibration and functional verification, maintenance using OEM parts and the application of all engineering change orders and software updates. Services are available through contract Care plans, FleetCare or per incident as requests. 

Top 4 Reasons to Choose VIAVI for Your Repair and Calibration Needs:

  • Minimize business disruption
  • Budget
  • Measurement Accuracy and Product Reliability
  • Measurement Compliance, TL9000 certification and OEM Standards

Explore More


Und so geht es

Sie wünschen eine Produktvorführung? Wenden Sie sich an uns, wenn Sie mehr Informationen oder ein Preisangebot wünschen oder Fragen zum Kauf haben.