Все продукты

Copy fast ethernet traffic from a full-duplex copper link for a copper monitoring device
Aggregate full-duplex traffic but also convert that traffic to be analyzed by a copper or optical single-receive analysis or security device
Copy full-duplex traffic and aggregates the traffic into a single stream to any analysis or security device with a single-receive capture interface
Copy gigabit traffic from a full-duplex copper link for a copper monitoring device
Copy gigabit traffic from a full-duplex copper link for a copper or optical monitoring device
The Xgig Fiber Channel Load Tester is the first generation tool with a high speed 14 Gbps Fiber Channel (16 GFC) protocol available on the market.
Trilithic 180 DSP
The 180 DSP is a signal level meter specifically tailored for installation and troubleshooting of RF signals. Featuring fast measurements and powerful troubleshooting tools, the 180 DSP comes equipped with all the tests an installer needs to measure both Analog and Digital signals and ensure the highest quality installation—and includes a price point that makes it feasible for system operators to outfit their entire fleet.
Trilithic 1G DSP
The 1G DSP conveniently combines CATV, DOCSIS 3.1 Cable Modem, Gigabit Ethernet, and Optical testing in a single meter for troubleshooting and maintenance of your entire HFC plant.
The 1G DSP with TDR conveniently combines CATV, DOCSIS 3.1 Cable Modem, and cable TDR testing in one rugged, hand-held instrument.
Trilithic 360 DSP
The 360 DSP is the first meter designed specifically to simplify Home Certifications. Built from the ground up, tailored specifically for the needs of fulfillment, this meter is ideal for standardizing processes and procedures for installation and service. The 360 DSP also includes a price point that makes it feasible for system operators to outfit their entire fleet.
VIAVI OSP has been delivering 3D depth sensing filters from the technology’s roots in the revolutionary Microsoft Xbox Kinect. Through multiple generations of increasing performance and decreasing cost, we remain the industry’s leading supplier of high performance filters for depth-sensing systems in consumer electronics.
The VIAVI 10 GigE/GigE Interface (J6873A) is a half-length, full-height PCI Express® interface card that provides full 10 gigabit capture, extensive filtering, and network key performance indicators to solve more network problems quickly.
7200B Configurable Automated Test Set
The industry’s premier instrument platform for production, depot level maintenance and field test of current and next generation radio systems
800G FLEX Module
400G QSFP-DD Test Module for the ONT-800
The 802 AWE™ is a handheld wireless network test set that is designed to help identify and resolve many problems that are encountered during Wi-Fi, ZigBee, or Bluetooth wireless network deployments.
8150 TETRA AirAnalyzer
EXCLUSIVE TETRA Network QoS Analysis, Protocol Logging and System Performance Analysis
8380 RPC
The 8380 RPC Return Path Combiner is a programmable 16 x 1 non-blocking RF matrix switch designed for use with the 8310 RSA Return Sweep Analyzer in the return path of CATV systems.
9581 SST
The 9581 SST Return Path Analyzer is the only DSP-based return path analyzer in the industry.
ACTS Software
Server application enables a proprietary connection with the Original or New DSP Family of Field Analyzers for communication and testing Packet Loss, Latency, Jitter and MOS of VoIP services.
ADS-B INTEGRITY Test Application
Performance testing of ADS-B Out equipment
ALT-8015 FMCW/Military Pulse Radio Altimeter Test Set
Versatile time-saving portable test set for testing installed FMCW and military pulse radio altimeters
APM-424 MK XII/XIIA Test Sets
Fast, reliable performance testing for mission-readiness
CERTiFi is a cloud-based solution for teams who design, build, test, and certify the structured cabling in enterprise networks.
CPRIAdvisor CAP-100/CAE-100/CAM-100
CPRIAdvisor is an interference monitoring solution that increases RF visibility by performing continuous monitoring of the mobile spectrum, and allowing remote access to expedite maintenance and problem resolution.
CT-4
The CT-4 is a Digital Channel Tagger that is used as a system with the Seeker D Digital Leakage Detector to detect leaks in the Aeronautical and LTE frequency bands and eliminate all 'false alarm' triggers by providing proprietary dual CW carriers at two locations.
CellAdvisor 5G
VIAVI CellAdvisor 5G — идеальное полевое портативное решение для контроля всех аспектов развертывания, технического обслуживания и управления базовых станций 5G.
Промышленный стандарт в сертификации медных и оптоволоконных сетей
Charms™ are printable taggants that covertly incorporate customized logos and are easily identified using a low-cost, portable microscope
ChromaFlair pigments are unique, multi-layer pigment flakes that give paints, coatings, plastics, textiles and packaging the ability to change color when viewed from different angles.
Compliance Assistant
Compliance Assistant software simplifies FCC EAS compliance through automation.
CEA
The xSIGHT CEA Application enables the industry’s most effective assurance workflows via the real-time correlation of customer experience to the underlying network and service performance.
Измеритель мощности OLP-87 позволяет выполнять одновременные измерения мощности восходящих и нисходящих волн в действующих сетях B/E/G-PON и поддерживает сети PON нового поколения (XG(S)-PON, 10G EPON и NG-PON2).
Robust and compact DOCSIS 3.1 installation and service meters for cable service providers and contractors.
dsp
The DSP TDR precisely locates cable breaks or faults to get service back online as soon as possible.
DTSS on the T-BERD/MTS-8000 platform
The portable DTSS on the T-BERD/MTS-8000 platform brings new DTSS technology to the field in a uniquely portable and high powered combination. This product can also be provided in a rack-mounted optical test unit within an OTU-8000 to be combined with ONMSi for a permanent fiber monitoring solution.
Allocate valuable testing and troubleshooting resources more effectively via remote PC access to the VIAVI communication analyzers
EASyCAP
A one-box solution for delivering CAP-based audio alerts with extended capabilities for broadcast radio systems.
EASyCAP
A one-box solution for delivering CAP-based audio and video alerts with extended capabilities for broadcast TV systems.
EASyCAP
A one-box solution for delivering CAP-based audio and video alerts with extended capabilities for cable TV and OTT systems.
EASyCAP
A one-box solution for delivering CAP-based audio and video alerts with extended capabilities for IPTV and OTT systems.
EASyCAP
A one-box solution for delivering CAP-based audio and video alerts with extended capabilities for international markets.
Integrated automated test facilities for testing long-term reliability of optical components while subjected to environmental stress conditions in a temperature/humidity chamber.
A next-generation service assurance solution that addresses the entire Ethernet Service deployment life cycle including test and turn-up acceptance, SLA/performance monitoring and reporting, and test and troubleshooting with both hardware and virtualized software solutions.
eCo Architect
eCo Architect is an Eclipse-based development tool that lets you create, validate, and debug SCA software components and applications. Utilizes a visual modeling language that allows developers to unambiguously express every concept of the SCA graphically. Generates behavioral and structural source code that builds for all supported operating environments. Provides a Zero-Merge functionality to simplify business logic insertion.
eCo Hub
eCo Hub implements the SCA 4.1 Core Framework (CF) that deploys, configures and controls software applications on the target embedded system platform. It supports the largest combination of operating systems, object request brokers, and processors. Not being subject to ITAR restrictions, eCo Hub is based on the knowledge and optimization techniques acquired with the former SCARI CF that runs in thousands of battlefield deployed radios from different international radio manufacturers.
eCo Inspector
eCo Inspector is an Eclipse-based run-time monitoring tool that lets you install and control applications as well as visualize the structure of the running software. The NordiaSoft eCo Inspector is an essential tool for debugging and testing during SCA development.
Визуальные локаторы повреждений для обнаружения перегибов и изломов, локализации повреждений и полномасштабных проверок на непрерывность.
Identifies optical fibers by detecting the optical signals being transmitted through a single-mode fiber.
Идентификатор активных волокон позволяет легко определить наличие передачи данных по оптическому кабелю без его отключения от оборудования, а также определить уровень оптической мощности сигнала.
FVAm Benchtop Microscopes
"All-in-one" benchtop inspection and analysis solution for multifiber connectors such as MPO
The "all-in-one" handheld solution for fiber inspection.
Fiberchek Sidewinder
Комплексное портативное решение для проверки и анализа многоволоконных разъемов, таких как МРО.
Fuel Interfaces
Fuel Interface Cables
Fusion, the cornerstone product of the vNet solution set within the VIAVI NITRO™ platform, provides software-based lifecycle management for test, service activation, performance monitoring and troubleshooting on all network layers.
GEOanalytics delivers a sophisticated API to allow third party applications to make direct use of the location intelligence, with the additional dimension of building level resolution location information.
GEOinsights unlocks the power of the location intelligence. The data feed transforms the detailed connection centric data into an anonymized, aggregated feed of insights about places, people, and time, enabling new revenue streams through data monetization.
The modular approach of GEOoptimize, deployed as a service or as a solution, meets the complexity issues operators face today by delivering automated network performance optimization harnessing the power of geo-located subscriber-centric intelligence.
NITRO GEO GEOperformance, powered by the Network Integrated Test, Real-time analytics and Optimization (NITRO) intelligence platform, uses location intelligence to transform RAN planning and performance engineering by increasing operational efficiency, and significantly increasing return on investment, while delivering game changing improvements in the network performance actually experienced by customers.
Система с портативным дисплеем, встроенным измерителем оптической мощности (OLP-34) и специальным микроскопом для осмотра разъемов коммутационных шнуров. Позволяет выполнять осмотр портов и разъемов, а также тестирование оптических каналов.
The VIAVI Solutions® Hi-Res Multimode OTDR solution has been designed to characterize and locate faults on very short multimode fiber runs deployed in aircraft, spacecraft, submarines, and ships.
High-Density Optical nTAP
With several options available, you can scale up to 24 modules in one unit of rack with the High-Density Optical TAP.
Tighten up the home coaxial network with this kit, finding leaks using the technician's (DSP or ONX) signal level meter.
The I-Stop reverse test probe is a test accessory you can use with signal level meters and/or analyzers for bi-directional measurements with no risk of power damage.
IFF-45TS
Provides RF signal generation and parametric measurement of MK XIIA and TACAN equipment
IFF-7300S Series IFF/Crypto/TACAN Automated Test System
For military transponders, interrogators, cryptos and TACAN transceivers
IFF-7300S Series IFF/Crypto/TACAN Automated Test System
Supports military IFF transponder modes and TACAN
IFR 4000 Nav/Comm Flightline Test Set
Самое портативное устройство на рынке для тестирования навигационных и коммуникационных систем в стендовых условиях
16x1 5-1000 MHz, 75 Ohm, RF input switch controlled by the RSAM to provide monitoring at up to 128 different test points.
An easy-to-use solution that allows users to quickly locate an interference source by following guidance on a tablet-based map application.
JMEP is a powerful micro Ethernet probe for Ethernet and IP performance assurance.
JTNC APIs
Ensure interoperable, secure, and cost efficient waveforms and wireless communications by recommending standards, conducting compliance and certification analyses in accordance with DoD policies, and maintaining a DoD Waveform IR.​
LAW
LAW, coupled with Seeker GPS, provide a leakage management system that enables operators to find and fix leaks quickly.
VIAVI OSP has a rightful claim to mastery. Since 1948, we have continued to pioneer the development of advanced optical coating technologies.
As technology companies and auto makers add new functionality to make cars more automated, LiDAR (Light Detection and Ranging) systems play an important role in ensuring that cars accurately sense and react to the environment around them.
VIAVI OSP has a rightful claim to mastery. Since 1948, we have continued to pioneer the development of advanced optical coating technologies.
VIAVI OSP has a rightful claim to mastery. Since 1948, we have continued to pioneer the development of advanced optical coating technologies.
The Multiple Application Platform (MAP) multiport tunable filter module (mTFX-C1) dramatically simplifies test signal management for next-generation 100 G+ interfaces, sub-systems, and system test.
Panel mount or remote head configurations with densities up to 4 per module.
Optical Switch Solutions built on the industry-leading, fourth-generation instrumentation class of VIAVI optical switch technology.
Одномодовые измерительные модули вносимых/ обратных потерь и многомодовые измерительные модули вносимых потерь, п совместимые с EF, высокоточной платформы MAP-200 VIAVI.
Test solution for manufacturing and new device development of passive DWDM devices, ROADMs & Circuit Packs. Provides full characterization of wavelength dependence performance.
MAP-200 Tunable Distributed Bragg Reflector (DBR) laser (mTLG-C1) is a new-generation tunable laser that is ideal for DWDM testing where the capability to change wavelength on demand over the C- band with 50 GHz spacing is essential.
High-resolution, wide wavelength-range attenuator ideal for use in applications such as analog systems and high bit-rate digital systems.
The MAP-200 Broadband Source (mBBS-C1) provides an amplified spontaneous emission (ASE) output that is ultra-stable, spectrally flattened and high-power density across the extended C-band.
The MAP-200 Erbium Doped Fiber Amplifiers (mEDFA-C1) meet some of the most demanding optical specifications including a low-noise version with <3.7dB noise figure. DWDM, high power and an L-band version are also available.
The MAP-200 general purpose light sources (mSRC-C2) are fiber-coupled, fixed-wavelength emitters that cover key Telecom/Datacom wavelength bands of 850, 1300, 1310, 1490, 1550, and 1625 nm.
Single-channel, polarization-independent semiconductor optical amplifier (SOA)
map-200-passive-utility-module
The MAP-200 Utility Module, mUTL-C1, provides a range of passive optical devices such as couplers, splitters, Mux/Demux modules and band-pass filters to simplify the integration of these devices into automated test systems
The MAP-200 Polarization Control Module (mPCX-C1) provides polarization scrambling, control and stabilization for use in applications such as temporal depolarization, 100G+ coherent interface testing as well as stabilization and tracking of target SOP conditions
MAP-2100
The one tool data center operators need to remotely test transmission quality of the network connecting its data centers, central offices, or head ends.
Provides a flexible, more cost-effective compact platform for optical test switching and signal conditioning in optical device and sub-system development and manufacturing.
MCV-1
Mobile calibration verification unit that is used as a signal source for checking the calibration of both the Original and New DSP Family of Field Analyzers as well as most typical field analyzers.
Портативный сетевой тестер MTS 5800-100G — это тот самый инструмент, который необходим техническим специалистам и инженерам для организации, настройки и технического обслуживания сетей. Он поддерживает как традиционные, так и передовые технологии сетевых приложений, включая приложения для тестирования базовых и городских сетей, сетей центра обработки данных и сетей предоставления коммерческих услуг.
T-BERD/MTS-2000
Портативная платформа для монтажа, подготовки к работе и обслуживания волоконно-оптических сетей.
Интегрированное двухмодульное решение для автоматизации тестирования и сертификации оптоволокна
Модульная многофункциональная тестовая платформа оптоволоконного и сетевого интерфейса позволяет производить самый широкий ряд тестов оптоволокна и сетей.
MTS-8000 представляет собой самую масштабируемую в мире тестовую платформу для развертывания и тестирования высокоскоростных сетей следующего поколения - 40G и 100G. Это многофункциональная платформа с возможностью тестирования оптических линий связи, транспортных каналов связи и каналов Ethernet.
Medusa Labs Test Tools Suite is leading application-based data testing and signal integrity testing tool enabling developers to identify, locate, and resolve elusive errors through stress testing before products are released to market.
MicroNIR OnSite-W Probe With Tablet
The MicroNIR™ OnSite is a compact, ruggedized and ergonomic design making it ideal for applications in the field or on the manufacturing floor. MicroNIR OnSite is controlled by tablet PC based software with intuitive user interface which requires minimum training to operate.
The MicroNIR™ PAT-U is a USB-powered rugged NIR spectrometer. It is the smallest of its kind on the market making it suitable for use on equipment of different sizes as well as implementation of multiple of the analyzers on a given process.
The MicroNIR™ PAT-W is a battery-powered rugged NIR spectrometer equipped with WiFi connectivity for data communication making it suitable for use on rotating blenders as well as other stationary process equipment.
The MicroNIR™ Pro is an excellent development tool for a new user assessing the feasibility of NIR spectroscopy for their applications. The product is offered with a number of accessories that allow for ease of use in an at-line or laboratory setting.
MicroNIR Onsite
The MicroNIR™ Tablet Probe was specifically designed for the rapid analysis of individual pharmaceutical tablets & pills, single grain kernels & seeds, and similar material types. In addition to these samples, the Tablet Probe can also be used for the analysis of powders contained in plastic bags in both large and small volumes.
Mission Test
Is your radio mission ready?
Modular AXIe
We are pleased to announce its new modular line of products based upon the latest AXIe standard. The new AXIe chassis is the world’s first to support both the Wide PCI Express Extensions for AXIe and PCIe Gen3 backplane data rates, making it the test and measurement industry’s highest-throughput modular chassis.
​The MAP-based integrated multi-wavelength meter and high resolution optical spectrum analyzer module combines sub-GHz resolution performance and compact modularity in a single slot cassette.
NEON Signal Mapper
Картопостроитель сигнала для определения покрытия в здании
The heart of the VIAVI Location Intelligence solution is the NITRO Mobile platform, which connects to the Network OSS to collect customer generated trace data. Using patented methods the billions of events per day are geolocated, analyzed and loaded into the intelligence store.
Provides performance management capabilities including data collection, correlation, analytics and reporting enabling service providers to proactively identify faults, troubleshoot and resolve problems and perform trend analysis and capacity planning.
Centralized Ethernet turn-up test and troubleshooting tool for Service Activation of Business Ethernet and Mobile Backhaul applications.
OCC-4056C DWDM Optical Channel Checker Module
The OCC-4056C module offers the functionality and speed of an OSA in a handheld form factor at a fraction of the price of a traditional OSA. It is an ideal test tool for metro/access links and DWDM systems.
The 400G CFP8 Module is a scalable test solution based on the latest standard for 400G and 200G Ethernet (IEEE 802.3 bs) and ready for OTUCn. It boasts a CFP8 slot to host the first-generation 400G pluggables, support for upcoming QSFP-DD and OSFP available via adapters. FlexE and FlexO applications are addressed via 5 QSFP28 slots.
ONT-600 FlexE
Software Option for ONT-600 QFLEX, CFP8 QFLEX Data and CFP8 PHY Module
The MTM provides high density 155M to 11.3G testing at layers 1 through 3. Concurrent users can control a broad protocol range including OTN, GigE/10GigE LAN, SONET/SDH, and Fiber Channel.
The VIAVI ONT N-PORT module is a 4-port solution for test and system verification of 100G-class products. It supports four native, fully independent QSFP28 or SFP28 ports. Test applications include Ethernet, OTN, and Fiber Channel.
ONT-800 Rack
Highly configurable, multi-protocol, multi-port test platform for R&D and system verification of optical transport ICs, modules, and systems
High resolution OSA with lab performance in a field-ready tester for spectral analysis of 10/40/100 and 400 G DWDM networks.
Автоматический мониторинг оптической сети с помощью наиболее компактного на рынке рефлектометра, устанавливаемого в стойку
OVF-1 Visual Fault Locator
For fault location in fiber optics networks.
Observer Analyzer
Observer Analyzer monitors unified communications (UC) deployments, network performance, applications, and troubleshooting on complex networks including VM environments.
Observer Apex offers end-user experience scoring with seamless integration to GigaFlow enriched records and GigaStor transaction details to help IT teams achieve optimal service delivery.
Observer GigaFlow transforms flow-based analysis by combining multiple traffic and infrastructure data sources to provide deep performance management and network security insight
The best packet capture and analysis appliance in the industry ensures every network conversation is available for troubleshooting and deep-dive forensic investigations.
The Observer Management Server (OMS) UI features simple navigation to easily authenticate, control user access and passwords, administer upgrades, and streamline management from a single, centralized location.
Cover your edge and remote network sites with Observer Probes. Monitor performance and aggregate across sites with GigaStor within Apex for broad visibility into resource health.
When migrating to the cloud or ensuring hybrid IT performance, use Observer SightOps to get comprehensive visibility for multiple vendors, including AWS, Azure, and more.
Transfer network traffic from a full-duplex copper link to a copper analysis or security device in a single stream.
Copy traffic from a full-duplex copper link and send it to a copper or optical monitoring device – also available with aggregation functionality.
Easily send Ethernet traffic from a full-duplex copper link to a copper monitoring device with Observer Copper TAPs.
With several options available, you can scale up to 24 modules in one unit of rack with the High-Density Optical TAP (HDOT).
High-Density Optical nTAP
nTAPs are passive, full-duplex devices, offering complete visibility to monitoring devices regardless of traffic level. They work with the leading management tools for quick and easy deployment. nTAPs are transparent for monitoring critical links, and provide continuous network data flow even if power fails. nTAPs are scalable, modularized, space efficient, and economical.
SaaS-based, flexible, and quick to deploy active testing, ObserverLIVE empowers teams to overcome the potential pitfalls of hybrid IT while fully leveraging its business value.
Copy traffic from one full-duplex optical link for one optical monitoring device
The OneExpert CATV signal analysis meter platform makes every technician an expert by verifying network performance and making troubleshooting simpler, faster, and more powerful than ever.
Consistently achieve high-performance results when deploying fast broadband service to the home.
Copy traffic from one full-duplex optical link to one optical monitoring device
Integrated fiber characterization and dispersion test solution combining PMD, CD, and AP measurements to characterize high speed networks.
Copy traffic from one full-duplex optical link to one copper monitoring device
Copy traffic from one full-duplex optical link to one copper monitoring device
Видеомикроскоп для автоматического осмотра и анализа разъемных соединений в ВОЛС позволяет получать результаты по методу PASS/FAIL с помощью решений VIAVI.
Fast, cost-effective and accurate polarization mode dispersion (PMD) testing for high speed network characterization.
PSD90-1C AC/DC Fuel Capacitance Test Set
Technologically advanced test set, providing multiple functions for calibration and troubleshooting
PathTrak provides superior spectrum and QAM analysis capabilities enabling the most efficient and effective monitoring and troubleshooting capabilities. Now fully supported by XPERTrak software, PathTrak is an integral part of the VIAVI Solutions overall HFC maintenance, monitoring, and troubleshooting portfolio.
VIAVI OSP has a rightful claim to mastery. Since 1948, we have continued to pioneer the development of advanced optical coating technologies.
Polatis Optical Matrix Switches
The Polatis range of optical matrix switches provide versatility in optical switching applications
Обеспечивает возможность тестирования и диагностики Ethernet сетей и опорных сетей мобильных операторов (backhaul) при активации сервисов и локализации проблем при обслуживании.
RSVP²
RSVP² for reverse path testing is designed specifically with the CATV installer in mind.
High-performance solution for 2, 2.5, 3 and 4G system verification, troubleshooting, and RAN optimization. Its intelligent call trace-centric approach supports the evolution of CDMA, including CDMA One and CDMA2000.
High-performance solution for 2, 2.5, 3 and 4G system verification, troubleshooting and RAN optimization. Its intelligent call trace-centric approach supports the evolution of GSM including EDGE, GPRS, EGPRS and UMTS.
High-performance solution for 2, 2.5, 3 and 4G system verification, troubleshooting, and RAN optimization. Specific benefits for IMS include advanced decodes, powerful call traces and efficient signaling analysis.
The VIAVI Signaling Analyzer Real Time (SART) is a high-performance solution for 2, 2.5, 3 and 4G system verification, troubleshooting, and RAN optimization. Its intelligent call trace-centric approach supports the evolution of SS7.
VIAVI Signaling Analyzer Real Time — это наиболее полное в отрасли комплексное решение для анализа и устранения неполадок в сетях LTE, в состав которого входят многофункциональные системы мониторинга и диагностики.
Платформа VIAVI Signaling Analyzer ускоряет проектирование и развертывание сетей 3G UMTS, помогает клиентам выполнять проверку, диагностику и оптимизацию RAN для UTRAN на основе ATM, а также переводить свои сети на архитектуры IP UTRAN.
The headend/hub rack-mounted SCU-1800 provides non-interfering downstream sweep to 1.218 GHz and upstream sweep to 204 MHz on up to 16 ports.
SST Configure
This is the SST Configure software for the 9581 SST R3, 9581 SST R4, & 9581 SST R5 Return Path Analyzers.
Salus K12 EMS
Reliable, Effective, Instant Alerting at Your Fingertips
SecureShift inks provide an overt color-shifting appearance that enhances security through easy visual verification.
Seeker & MCA III
Seeker with MCA III is a GPS-based leakage management and CATV leak detection system for documentation and troubleshooting.
Seeker D & MCA III
Seeker D with MCA III is a GPS-based leakage management and CATV leak detection system with a dual-band leakage detector capable of monitoring leakage within the aeronautical band or the near-LTE band in a complete digital system.
Seeker D Lite
The Seeker D Lite is a dual-mode and dual-frequency in-home leakage detector that accurately monitors leakage in all digital systems or in mixed digital and analog systems. The Seeker D Lite works with both the CT-4 Channel Tagger in the headend or the Seeker D Lite Source Transmitter in the field.
Seeker HL
The Seeker HL In-Home Leakage Evaluation System is a low-cost digital leakage solution that includes a dual-frequency tagged signal source, with a selectable output level and a discriminating leakage receiver that is designed to be extremely sensitive to leakage in both the Aeronautical and LTE Frequency Bands.
Seeker Lite²
Frequency agile leakage detector (120 - 147.25 MHz) with ten user selectable presets features Searcher Plus GT technology that is compatible with CT-2 or CT-3 channel tagging techniques, a measurement range from 10 - 2000 uV/m, as well as numeric readout, and tone proportional to signal strength.
Seeker Setup
This is the Seeker Setup configuration software for the Seeker Product Family of Leakage Detectors.
VIAVI Signaling Analyzer Real Time (SART) — это высокопроизводительное решение для тестирования беспроводных сетей, предназначенное для проверки и диагностики сетей 2, 2.5, 3 и 4G, а также для оптимизации RAN.
Single Fiber Insertion Loss & Return Loss System
PCT-rm is a MAP-220 based Insertion Loss (IL) and Return Loss (RL) solution targeting single fiber connector applications in the lab and in manufacturing.
VIAVI small cell solution including NetComplete EtherASSURE and PacketPortal Intelligent Network Visibility and Ethernet Assurance Microprobes.
Smart ID Plus
Solution for problematic coax home wiring reduces repeat calls and improves customer experience.
SmartClass 4800
Optimized for business services installation teams, the SmartClass 4800 is a highly efficient, modern tool for ensuring data and voice services achieve expected key performance indicators (KPI).
SmartClass Fiber MPOLx MPO Optical Loss Test Sets
VIAVI Solutions SmartClass Fiber MPOLx — первый в отрасли специализированный набор для тестирования оптических потерь, который соответствует требованиям тестирования к сертификации по уровню Tier 1 (базовый) на многоволоконных кабелях.
Optical power meters for the installation and maintenance of singlemode and multimode fiber optic networks. Combine pass/fail fiber inspection and optical power measurement into one solution.
With a 100 dB dynamic range, the OLP-85 and -85P optical power meters are perfect for any fiber-optic network power or loss test application.
OLP-88 TruePON tester is an innovative tool using GPON data analysis technology. It is the ideal test unit for field technicians dealing with GPON network service activation and for support teams in charge of resolving service complaints and identifying the sources of issues.
The OLS-85 inspection-ready optical light source is the ideal partner to the SmartClass Fiber OLP-85 and OLP-85P to perform automatic loss test.
The fastest and easiest solutions for Tier 1 fiber certification
The SmartClass Fiber ORL-85 and -85P combine microscope, optical power meter (OPM), light source (OLS), continuous wave return loss meter (OCWR), and connector inspection in one compact instrument.
Compact, low-cost test solution for installation, maintenance, and upgrades of CWDM & DWDM networks.
Compact and rugged handheld attenuators for field or lab use.
Универсальный инструмент для настройки услуг широкополосного доступа, включая тестирование меди, ADSL 1/2/2+, данных IP, VoIP и IP-видео.
SmartOTDR Handheld Fiber Tester
Компактный и легкий тестер SmartOTDR упрощает и оптимизирует тестирование городских сетей и сетей доступа в полевых условиях благодаря удобному OTDR-интерфейсу и автоматическому анализу, понятному любому техническому специалисту.
SmartOTU — автономное решение для удаленного тестирования оптоволокна, позволяющее автоматически находить его повреждения и вести наблюдение за оптоволоконными сетями.
Optical Power meter for downstream and return-path test in RFoG and PON systems.
Линия недорогих карманных измерителей оптической мощности для установки и обслуживания одномодовых и многомодовых волоконно-оптических сетей.
В состав комплекта входят источник света (OLS-3x), измеритель мощности (OLP-3x) и дополнительные принадлежности.
SpectraFlair pigment is a multi-layer thin-film flake comprised of magnesium fluoride and aluminum. Precisely controlling the thickness and relief of the pigment’s flake structure produces the diffractive effect characteristic of SpectraFlair pigment.
There is a fascinating world to be seen beyond the range of human vision. Hyperspectral imaging – seeing beyond the visible spectrum with much more color detail – allows us to explore the invisible world that surrounds us.
Data analysis software for advanced analysis, reporting, printing, and archiving of test results.
StrataSync — облачное решение, обеспечивающее управление измерительными приборами VIAVI, их настройкой и результатами тестирования.
The TM500 Test Mobile family is in use with almost every base station manufacturer across the world, and can be regarded as the de facto standard for network testing via RF.
Empowers cable operators to increase customer satisfaction by utilizing customized, automated testing procedures to significantly reduce repeat service calls and increase productivity.
Software for maintaining and optimizing DSAM meters; provides Field Data Management, Meter Browser Management, and DSAM Remote Access.
WorkFlow automation software for the JDSU HST-3000 Handheld Services Tester.
TeraVM — решение для эмуляции приложений и проверки систем безопасности, которое обеспечивает комплексные возможности тестирования прикладных сервисов, проводных и беспроводных сетей.
TeraVM 5G vRAN Emulator
The VIAVI TeraVM 5G vRAN emulator provides a full wraparound test of a 5G Standalone Core Network.
TeraVM – 5G Core Emulator
Одна из основных задач, стоящих перед NEM и мобильными операторами при запуске сетей 5G, — разработка продуктов в соответствии с постоянно изменяющимися и совершенствующимися спецификациями 3GPP.
Полностью виртуализированное решение для проверки приложений и средств безопасности, позволяющее тестировать и обеспечивать безопасность устройств, сетей и их сервисов
Основополагающий принцип TeraVM заключается в том, что это исключительно программное решение. TeraVM — это гибкий испытательный стенд, который может использоваться для программно-ориентированного тестирования и обеспечивает надежные и повторяемые результаты. TeraVM работает на любых гипервизорах/аппаратных платформах, на которых построены сервисы общедоступного облака, например, Amazon Web Services, Microsoft Azure или платформы частного облака OpenStack или OpenMano.
Copy traffic from three full-duplex optical links for three optical monitoring devices
Throughput testing as a virtual network function based on RFC 6349.
Copy traffic from two full-duplex optical links for two optical monitoring devices
UC-584 Series Transponder Antenna Coupler
Providing repeatable test results on the ramp or in the hangar
Enables technicians to install and troubleshoot copper-based single pair and bonded pair VDSL2 and ADSL2+ circuits the right-way -- dual ended with UltraFED IIB.
The VSA-RF100 integrates both RF and MPEG analysis to quickly identify and troubleshoot customer-affecting issues down to the individual program level.
The VSE-1100 is the industry’s first converged digital spectrum video analyzer and noise-troubleshooting platform designed for the challenges of the converged cable access platform (CCAP) and remote PHY evolution.
The industry’s only software-based solution that monitors operators’ video services end-to-end from the video source to the end device with active and passive testing.
The Wander Analysis Software is an advanced synchronization evaluation tool with the ability to import and analyze TIE data.
The first WiFi/wireless LAN analyzer built for installers at all skill levels with intuitive capabilities for rapid characterization, optimization, and troubleshooting of home WiFi networks.
Wireless Innovation Forum (WInnF) APIs
WInnForum members are dedicated to advancing technologies supporting the innovative utilization of spectrum and the development of wireless communications systems, including essential or critical communications systems.
XPERTrak
There are many systems available today to turn dashboard indicators red, but only XPERTrak™ also gives you the insight and tools to help you turn them green.
Comprehensive multiprotocol analysis, load testing, and error injection for all SAN/NAS technologies.
Xgig 1000 24 Gbps SAS Solution
Fully integrated, stand-alone system with 24/12/6/3 Gbps SAS multi-functions (Analyzer and Jammer)
Extensive Xgig capabilities and flexibility provide unmatched network visibility to more easily identify and resolve problems, accelerate new product design, and speed time-to-market.
The most powerful PCIe and NVMe analysis system available, offering complete visibility into traffic flows with advanced trace and analysis capabilities.
The Delay Emulator simplifies test setup and configuration and provides developers with a suite of powerful yet flexible capabilities to accurately emulate a variety of real world operating conditions.
The Xgig 10GbE and Fiber Channel Analyzer is a versatile, state-of-art solution for monitoring and analyzing live traffic of different storage protocols, including 10G Fiber Channel, 10GbE, iSCSI, FCIP, iFCP and iWARP.
Fully integrated, stand-alone system with 12/6/3 Gbps SAS multi-functions (Analyzer, Generator, Jammer)
XGIG 4K PCIe 4.0 Platform
The most powerful PCIe Gen 4.0 analysis system available, offering complete visibility into traffic flows with advanced trace and analysis and jamming capabilities.
The Xgig SAS/SATA analyzer is a critically-important tool for engineers developing and troubleshooting products and systems that involve the SAS/SATA protocols.
The powerful Traffic Generator extends the capabilities of the Xgig Analysis and Test Platform to create network traffic at line rate to stress test equipment during development and in-network.
The Xgig 8G Fiber Channel Analyzer offers a wide array of advanced analysis capabilities to enable users to achieve more robust product performance without sacrificing time-to-market.
Expert software comes standard with all Xgig Analyzers to provide a unique and robust set of debugging and analysis capabilities specifically designed to accelerate and simplify device development and troubleshooting.
The Xgig BERT solution simplifies signal integrity verification and high-speed bit error measurements by injecting data patterns into the traffic stream that create worst-case data loading conditions and stress a network's physical layer to its limits.
The Xgig Load Tester quickly and easily verifies data integrity, monitors network performance, and identifies a wide range of sophisticated problems across complex network topologies that would be too difficult to troubleshoot with an analyzer alone.
Xgig, designed for heavy-duty data traffic and complicated network structures, offers the industry a reliable analysis tool for high-bandwidth protocols such as GbE and iSCSI.Xgig® GbE/iSCSI Analyzer
The Xgig® Jammer manipulates live network traffic to simulate errors in real time, enabling users to verify the responsiveness and robustness of error recovery processes.
The xSIGHT Session Trace Application provides industry-recognized transaction tracing and decoding troubleshooting functionality much faster and at a lower cost than traditional solutions.
 xSIGHT Traffic Analysis Agent
Traffic Analysis Agents deliver Control and User Plane metrics in real-time via the xSIGHT Mediation component to xSIGHT or third-party monitoring apps.
Dexter Pham Jamie Owmbey
xSIGHT Traffic Storage Agents deliver Control and User Plane metrics in real-time to monitoring applications, plus store KPIs and Control Plane traffic for troubleshooting applications.
Анализаторы антенно-фидерных устройств CellAdvisor представляют собой компактный прибор с интегрированными решениям для измерения в линейной развертке и проверки оптоволокна с помощью измерителей РЧ и оптической мощности, являются переносными, обеспечивают поддержку облачных технологий и могут использоваться в процессе установки и технического обслуживания базовых станций.
Анализаторы базовых станций CellAdvisor с функцией анализа Радио через оптику (RFoCPRI) имеют возможность работы с двумя портами и способны проводить тестирование антенн, анализ спектра, поиск помех и декодировать стандарты сотовой связи. Анализаторы представляют собой портативные анализаторы спектра в прочном компактном корпусе с набором дополнительных возможностей: измерители РЧ и оптической мощности, функцией проверки оптоволокна.
Полный ассортимент анализаторов оптического спектра для спектральных измерений в системах на базе CWDM, DWDM, ROADM, измеряющих истинное значение OSNR с помощью уникального метода JDSU — внутриполосного измерения OSNR (In-Band OSNR).
Анализаторы сигналов CellAdvisor с функцией анализа Радио через оптику (RFoCPRI) способны проводить тестирование антенн, анализ спектра, поиск помех и декодировать стандарты сотовой связи. Анализаторы представляют собой портативные анализаторы спектра в прочном компактном корпусе с набором дополнительных возможностей: измерители РЧ и оптической мощности, функцией проверки оптоволокна.
Испытательная установка, позволяющая значительно повысить уровень технического обслуживания в оперативных условиях и на ангарных комплексах
Семейство компактных и недорогих источников оптического излучения для установки и обслуживания одномодовых и многомодовых оптоволоконных сетей.
Полностью интегрированное решение, автоматизирующее оптическую рефлектометрию МРО-кабелей
Портативный анализатор оптического спектра в диапазоне длин волн от 1260 до 1650 нм.
IFR6000 Transponder/DME/TCAS Flight Line Test Set
Отраслевой стандарт тестирования установленных систем
ALT-8000 FMCW/Pulse Radio Altimeter Flightline Test Set
Гибкий и портативный тестер для проверки установленных радиовысотомеров и импульсных радиовысотомеров
MP-60/-80
Измеряют оптическую мощность при подключении к настольному ПК или ноутбуком через порт USB 2.0.
Платформа для тестирования оптических компонентов для построения волоконно-оптических сетей в лабораториях на этапах разработки и в условиях производства.
ATC-5000NG NextGen Transponder
Готовность к глобальной модернизации УВД благодаря технологиям тестирования следующего поколения
Решение, позволяющее автоматически измерять двунаправленные вносимые потери (IL), двунаправленные оптические возвратные потери (ORL и проводить рефлектометрические измерения (OTDR) при установке, запуске и обслуживании сетей FTTx/PON, Access и Metro.
Решение, позволяющее автоматически измерять двунаправленные вносимые потери (IL), двунаправленные оптические возвратные потери (ORL по методу OCWR) и проводить рефлектометрические измерения (OTDR) при установке, запуске и обслуживании сетей FTTx/PON, сетей доступа, городских и магистральных сетей.
Первое решение для тестирования сетей в процессе эксплуатации с поддержкой поляризационного уплотнения и внутриполосного соотношения «сигнал/шум» для оптимизации производительности высокоскоростных сетей.
Оптический рефлектометр для тестирования линий связи при установке, запуске и обслуживании корпоративных сетей, FTTx, сетей доступа, городских и магистральных сетей.
4100-Series DWDM Module
Решение для DWDM-опторефлектометрии для развертывания, технического обслуживания и поиска неисправностей эксплуатируемых волоконно-оптических сетей DWDM
Решение для СWDM-опторефлектометрии для развертывания, технического обслуживания и поиска неисправностей эксплуатируемых волоконно-оптических сетей СWDM
Предназначен для установки в оборудование MTS для тестирования, позволяя создавать компактные и портативные решения для тестирования 100-гигабитных сетей как в полевых условиях, так и в центральном офисе.
Разработанный для применения в эксплуатационных условиях модуль расширения системы синхронизации (TEM) помогает операторам сети поддерживать точную синхронизацию, обеспечивая лидирующие в отрасли показатели точности при измерении параметров времени и синхронизации.
Компактный модуль COSA-4055 для платформ MTS-2000, -4000V2 и -5800 обеспечивает функциональность и скорость работы OSA, при цене, значительно меньшей, чем традиционные аналоги. Оптимальный контрольно-измерительный прибор для сетей доступа и городских сетей, а также систем CWDM.
Industry’s most compact 10 GigE multifunction tester for the installation and maintenance of carrier-grade Ethernet and Internet Protocol services.
OTDR Modules – 4100-Series for T-BERD/MTS-2000, -4000 V2, -5800 Platforms
Оптический рефлектометр для монтажа новых линий, расширения существующих и для выполнения технического обслуживания городских сетей, сетей FTTx/PON, сетей доступа и корпоративных сетей.
Provides clear digital voice transmission over a single fiber; hands free operation makes communication convenient for technicians using a headset or speaker phone mode.
3920B Series Analog and Digital Radio Test Platform
Отраслевой стандарт тестирования аналоговых и цифровых средств радиосвязи
Advanced Fiber Optic Connector End Face Cleaning System
GPSG1000
Развитые функции тестирования оптимально подходят для проверки работоспособности устройств с поддержкой GPS
Лучший тестер для сетей с использованием сетвисов triple play позволяет устанавливать и обслуживать медные и волоконно-оптические сети, ADSL/VDSL, IPTV, Microsoft TV, VoIP и сети, работающие на устаревших тесхнологиях.
Данный тестер является самым компактным в отрасли тестером сети 10 Гб. На протяжении всего срока службы может обеспечивать качественное тестирование, включая определение характеристик оптоволокна, активацию услуг, устранение неполадок и техническое обслуживание.
OTU-8000 Optical Test Unit
Автоматизация мониторинга оптической сети с помощью модульного, автоматизированного, устанавливаемого в стойку прибора для оптической рефлектометрии с широким выбором модулей оптических рефлектометров как для традиционных замеров, так и DTS/DTSS (распределенное измерение температуры и механического воздействия).
Представление событий опторефлектометрии в виде значков и немедленное отображение результатов «прошел / не прошел» обеспечивает удобство интерпретации результатов рефлектометрии и анализа.
Программное обеспечение для постобработки и создания отчетности, позволяющее просматривать, редактировать, анализировать и создавать точную и обновленную документацию данных полевого тестирования оптического волокна
Портативные РЧ-анализаторы CellAdvisor с функцией анализа Радио через оптику (RFoCPRI) имеют возможность работы с двумя портами и способны проводить тестирование антенн, анализ спектра, поиск помех и декодировать стандарты сотовой связи. Анализаторы представляют собой портативные анализаторы спектра в прочном компактном корпусе с набором дополнительных возможностей: измерители РЧ и оптической мощности, функцией проверки оптоволокна.
3550R Touch-Screen Radio Test System
Первый портативный радиоизмерительный комплекс. Все функции радиочастотного тестирования в компактном корпусе
Решение ONT-100G поддерживает тестирование 100G и проверку новых высокоскоростных сетевых элементов 40GE и 100GE Ethernet. Возможны оценка физического уровня, уровней PCS/MAC и тестирование QoS на скорости передачи данных 40GE и 100GE
Система удаленного мониторинга ВОЛС для опорных и городских сетей, сетей доступа и сетей FTTH
RGS-2000NG TCAS Test Set
Создан для инженерной разработки, проверки конструкции, производства и тестирования при возврате в эксплуатацию систем TCAS
8800SX Digital Radio Test Set
Передовой комплекс тестирования радиосистем в стендовых и эксплуатационных условиях