SmartClass Fiber OLP-88 TruePON 测试仪

借助集成的 GPON 数据分析，可确保快速准确地激活服务并排除故障

OLP-88 TruePON 测试仪是一款使用 GPON 数据分析技术的创新工具。它既是现场技术人员处理 GPON 网络服务激活的理想测试工具，也是支持团队用来解决服务投诉并确定问题来源的理想测试工具。

OLP-88 TruePON 测试仪是市面上首款具备诸如 OLT 和 ONU 识别、ONT 激活过程验证、自动 PON 功率电平认证、在线插入损耗测试以及外部/行为异常 ONU 检测等测试功能的仪器。通过与精确的下行和上行功率电平测量结合，OLP-88 可确保更可靠的 PON 测试，并能更快地排除网络问题。内置的 G-PON 数据分析功能可自动为服务技术人员提供所有必要的系统相关信息，从而简化和加快安装工作流程。

好处

可确保首次即正确的 GPON 网络验收
可减少服务激活期间的工作流程复杂性
可加快现场故障排除和设施服务恢复速度
可推动用户工作流程和行为，消除不良实践导致的问题。

应用

GPON ONT 激活过程验证
OLT 和 ONT 识别（序列号提取）
PON 信号自动功率电平测量和认证
在线光纤设备认证
识别行为异常的 ONU 或外部设备
自动通过/失败光纤端面分析

主要特性

简单易用的彩色触摸屏
紧凑轻巧的仪器（<1 千克）
可存储多达 10.000 条测试结果数据
USB、以太网和 WiFi 接口
电池续航时间长达 12 小时
支持跳线接头检测显微镜和 P5000i 数字检测探针

什么是光纤测试？

了解光纤测试，包括光损耗和光速测试，以及最佳实践和程序。

产品 Flash 二月 9, 2016

语言 English(英语)

VIAVI Introduces Simplified Service Activation and Troubleshooting

资料

应用指南

SmartClass Fiber OLP-88 TruePON

手册

SmartClass Fiber OLP-88/-88P TruePON

产品说明

海报

“了解无源光网络 (PON) 测试”海报 (简体中文)

快速参考

Quick Tech Tip: Troubleshooting Fiber-to-the-Home (FTTH)

选择指南

服务

VIAVI Care 支持计划 (简体中文)

白皮书和书籍

软件下载

视频

网络研讨会

Care Support Plans

Product Group	Recommend Plan	Bronze	Silver	Maxcare	Why Calibrate?
SmartClass Fiber (OLP-87/OLP-88) (PON Power Meters)	Silver-5				Optical components age with connection cycles. Maintain connectors and Lasers and pigtails. Validate measurement accuracies conform to published specifications. Factory standards to ensure accuracy VIAVI Calibrates to TL9000 factory standards to ensure your instrument is certified to measure accurately, as it did when it came off the factory line. Instruments that are out of calibration will produce unreliable measurements and can create false passing or false failing test results that often cause your team repeat work. We maintain, polish and clean all fiber connectors, fix pigtail connections that are internal to the product to ensure all ports stay in good working order and upgrade software / firmware to the latest approved release to enable enhancements. VIAVI Care Plans are the most cost-effective way to plan for calibration with a low, discounted price at the time of instrument purchase, however fixed rate calibration can be purchased at a later date on a separate purchase order. Ensure accurate measurements that meet calibration and service level agreements, ISO and TL standards for network test procedures. Ensure all test transmission signals work properly to avoid issues such as not reaching full line rate testing rate required to validate service bandwidth, speed and quality of service (QoS). Maintain ports and connectors to keep test transmissions working properly and to extend the life of the instrument. For example, if optical connectors and, lasers are bad or electrical/RF interface ports are loose after years of connection cycles, OTDR, TDR, and Radio Frequency measurements will not work properly. When doing construction, installation and activation work that must be certified, all network components typically must be tested with a certified, calibrated instrument to preserve warranty from manufacturer, such as fiber optic cable manufactures. Accurate RF frequencies and optical wavelengths are critical to meet measurement specifications. If using these to validate network elements, power levels, transmission rates, out of specification tools will prevent validation of network elements and signals. Why calibrate this product? Measurements might be out of specifications. QoS violated. Contractors might get not compensated due to wrong results. Delisting of approved suppliers. What are the most common implications of these issues to the business? Uncalibrated tools produce unreliable measurement results that can't be certified to specifications and may violate service level agreements or ISO/TL9000 standards with your customers and their network equipment vendors. QoS certification may be inaccurate and generate a repeat test need. Contractors are often not compensated or could be delisted as an approved service supplier due to incorrect results. Full manufacturer warranty (20-30 years) from cable suppliers (e.g. Corning, CommScope, Belden, ect.) will only be granted if the installation is certified with a calibrated instrument, thus the network owner is motivated to comply with correct installation certification procedures to retain and enforce the warranty on expensive cabling and optical network elements, etc. Common Business impacts include: Lost revenue, customer complaints and increased costs: Most network operators track and audit repeat work done by sub-contractors and often there is a billing dispute in these cases. Contractors with high rates of inaccurate test results are usually hired for less or not at all when not meeting SLA agreements or quality metrics. For Network Operators, repeat service quality issues with customers often causes added cost, customer dissatisfaction and loss of business. Example: Let's look at OTN/SONET/SDH/E1/T1 and various FTTX, DOCIS and xDSL measurements. It is critical to reach full line rate (1G, 10G, 40G, 100G) to test service performance and service error rates. If the uncalibrated tester can not reach full line rate during testing, a customer may be left with suboptimal performance that will quickly create complaints or alternatively, the technician could end up chasing phantom network problems that do not exist. What are the common issues?

VIAVI Care 支持

服务	BronzeCare	SilverCare	MaxCare	GoldCare	FleetCare
	图像	图像	图像	图像	图像
技术支持	高级版	高级版	高级版	高级版	高级版
工厂维修				标准服务 + 定制菜单：现场校准和培训，FAE 天数，自定义工程或软件订阅
优先服务
自定进度的培训
5 年电池和包覆盖 *
工厂校准
配件覆盖
备机借用

* 仅限 5 年计划；如果适用

电池/包覆盖
电池和包会随着日常使用和充电周期而磨损。为了确保这些项目不会拖累您，我们的 5 年计划包括在您的 5 年计划的整个生命周期内进行更换。

在为期 5 年的 SilverCare 或 MaxCare 支持计划期间，VIAVI 将提供一次更换损坏的电池和磨损的软包/手套的服务。只有当仪器被送回 VIAVI 进行维修或校准服务时，才会更换该仪器。硬箱排除在外，覆盖不适用于不带包/电池销售的仪器。

此覆盖包括在 5 年 Silver 和 MaxCare 计划中

MaxCare 配件更换覆盖
仪器产品配有配件电缆和连接器端子。为了确保可靠、准确的测试，我们将每年更换一个配件，以确保良好的测试结果。

当配件被确定为有缺陷或有故障时，VIAVI 将免费为客户修理配件或根据 VIAVI 的判断进行更换。更换的配件可能是新的，也可能是翻新的。所有退回的配件归 VIAVI 所有。适用以下限制：每 12 个月内可更换的配件最多为一个；适用的配件仅包括那些被认为对仪器运行至关重要且随原始购买产品一起发货的附件。如果存在问题，或者在校准或维修服务事件期间，客户有责任将有故障的附件寄回 VIAVI。

备机借用
现在您无需停机便可安排校准或维修。备机借用服务可在您将设备送去校准或进行突发性检修时向您出借类似配置的设备。

VIAVI Care Support for Existing Equipment

FleetCare

FleetCare plans can be customized to include any service entitlements on your fleet of existing equipment. Please fill out a Service Contracts form for a quote.

Any collection instruments with a single coterminous renewal date
Each contract is customized with any number of annual terms required by the customer
Onsite Calibration, Training, Field Application Engineer days can be added

View Brochure

Training Courses

This course presents a review of the technology fundamentals and proper fiber inspection, cleaning, and handling techniques and a detailed overview for using the product to inspect and clean MPO fibers and connectors and perform power/loss measurements and Loss/Length tests. Learn the recommended techniques for using the product to properly analyze MPO fiber end-faces, including becoming familiar with the GUI and menus and how to prepare it for fiber inspection, power/loss, and Loss/Length tests. Utilize the product to confidently analyze MPO fiber end-faces and test MPO circuits.

Course Number

TT-MPOLx

Course Highlights

Understand light propagation, network components and architecture, connectors and cable types, fiber losses and attenuation process
Describe the causes of loss in fiber networks and the types of contamination on fiber end-faces
Understand the recommended MPO fiber inspection and cleaning techniques and describe the proper process to perform
Navigate the product GUI and menus to configure for MPO fiber inspection and testing
Perform proper MPO fiber optic connectivity/continuity tests: inspection and cleaning of all optical connections, optical insertion loss (OIL) and optical return loss (ORL), end-to-end loss testing with optical power meter (OPM) and optical light source (OLS)

期限

1 天

Locations

Global

语言

English
Other languages available upon request

Type of Training Available

On-Site and Virtual Classroom

This course presents a detailed overview of the technology fundamentals and proper fiber inspection, cleaning, and handling techniques and for using the product to inspect and clean MPO fibers and connectors and perform power/loss measurements and Loss/Length tests. Learn the recommended techniques for using the product to properly analyze MPO fiber end-faces, including becoming familiar with the GUI and menus and how to prepare it for fiber inspection, power/loss, and Loss/Length tests. Utilize the product to confidently analyze MPO fiber end-faces and test MPO circuits.

Course Number

TT-FIB-MPOLx

Course Highlights

Understand light propagation, network components and architecture, connectors and cable types, fiber losses and attenuation process
Describe the causes of loss in fiber networks and the types of contamination on fiber end-faces
Understand the recommended MPO fiber inspection and cleaning techniques and describe the proper process to perform
Navigate the product GUI and menus to configure for MPO fiber inspection and testing
Perform proper MPO fiber optic connectivity/continuity tests: inspection and cleaning of all optical connections, optical insertion loss (OIL) and optical return loss (ORL), end-to-end loss testing with optical power meter (OPM) and optical light source (OLS)

期限

2 天

Locations

United States

语言

English
Other languages available upon request

Type of Training Available

On-Site and Virtual Classroom

This course presents an overview of the SmartClass Fiber MPOLx Product family. Learn how to use the buttons/controls of the MPOLx test set including the front panel and touchscreen display.

Course Number

TT-SC-FIB-MPOLx-OVRVW-SP

期限

11 分钟

Locations

Global

语言

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of the integrated patch cord microscope (PCM) on the SmartClass Fiber MPOLx product. Learn how to quickly inspect the multiple fibers in an MPO connector using the PCM Workflow buttons/controls. (run time ~ 10 minutes)

Course Number

TT-SC-FIB-MPOLx-PCM-OVRVW-SP

期限

10 分钟

Locations

Global

语言

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of how to set up and perform a Loss-Length test with the SmartClass Fiber MPOLx test set.

Course Number

TT-SC-FIB-MPOLx-LOSSLNGTH-SP

期限

23 分钟

Locations

Global

语言

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of how to operate the SmartClass Ethernet tester. Learn how to navigate the GUI and menus for user and testing preferences, launch and perform tests for layers 1, 2, and 3, and how to locate and manage test results.

Course Number

TT-SC-ETH-SP

期限

1 小时

Locations

Global

语言

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of the physical layout and features of the SmartClass Fiber HD4i Digital handheld Video Display device used in conjunction with the P5000i Fiber Inspection Microscope Probe. Learn how to use the device buttons, controls, and connectors.

Course Number

TT-SC-FIB-HD4i-OVRVW-SP

期限

12 分钟

Locations

Global

语言

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of how to locate and configure the various Menu and active test parameters of the SmartClass Fiber HD4i digital handheld Video Display for a fiber inspection test, used in conjunction with the P5000i Fiber Inspection Microscope Probe.

Course Number

TT-SC-FIB-HD4i-SETUP-SP

期限

11 分钟

Locations

Global

语言

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of how to perform a Fiber Inspection connector test using the SmartClass Fiber HD4i Video Display device in conjunction with a P5000i Inspection Microscope probe.

Course Number

TT-SC-FIB-HD4i-FI-TEST-SP

期限

10 分钟

Locations

Global

语言

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an Overview of how to use the FiberChekPro software application to configure the SmartClass Fiber HD4i digital handheld Video Display and the P5000i Fiber Inspection Microscope Probe for a fiber inspection (FI) test.

Course Number

TT-SC-FIB-HD4i-FCPRO-SP

期限

12 分钟

Locations

Global

语言

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of the SmartClass Fiber OLTS-85P product. Learn how to use connector ports and features on the top, rear, and side panels and how to navigate the GUI menus using both touch screen and keypad.

Course Number

TT-SC-FIB-OLTS85-OVRVW-SP

期限

14 分钟

Locations

Global

语言

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

Course Number

TT-SC-FIB-OLTS85-TIER1-SP

期限

23 分钟

Locations

Global

语言

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of how to do a one-cord test reference with the SmartClass Fiber OLTS-85P test set. Learn how to perform and set a test reference before performing testing operations.

Course Number

TT-SC-FIB-OLTS85-TESTREF-SP

期限

14 分钟

Locations

Global

语言

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an assessment of the knowledge and skills possessed for performing the fiber Inspection, cleaning, and testing techniques using the OLTS-85/85P and P5000i inspection probe in order to achieve the OLTS-85/85P FIT Certification.

Course Number

TT-OLTS85P-EXAM-SP

期限

1 小时 30 分钟

Locations

Global

语言

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

This course presents an overview of how to set up and perform a Loss test using the OLTS-85/85P.

Course Number

TT-SC-FIB-OLTS85-LOSS-SP

期限

15 分钟

Locations

Global

语言

English
Other languages available upon request

Type of Training Available

Self-Paced Online Training

每一阶段的支持

我们提供您所需的支持、服务、全面培训以及资源。这只是我们为最大程度提升您投资的价值所作努力的一部分。

我们倾力相助

我们倾力相助，为您获得成功加油。

联系销售专家请求报价

SmartClass Fiber OLP-88 TruePON 测试仪

借助集成的 GPON 数据分析，可确保快速准确地激活服务并排除故障

概述

什么是光纤测试？

新闻报道

VIAVI Introduces Simplified Service Activation and Troubleshooting

资源

资料

应用指南

手册

产品说明

海报

快速参考

选择指南

服务

白皮书和书籍

软件下载

视频

网络研讨会

服务

Care Support Plans

Factory standards to ensure accuracy

What are the most common implications of these issues to the business?

VIAVI Care 支持

VIAVI Care Support for Existing Equipment

Training Courses

Training Courses

Multi-Fiber Insp., Cleaning, and Testing with the MPOLx & P5000i

Fiber Optic Fundamentals & Multi-Fiber Inspection, Cleaning, and Testing with the MPOLx & P5000i

SmartClass Fiber MPOLx Product Overview

SmartClass Fiber MPOLx Patch Cord Microscope Overview

SmartClass Fiber MPOLx Loss-Length Testing

SmartClass Ethernet Basic Use & Testing (SPT)

SmartClass Fiber HD4i-P5000i Device Overview

SmartClass Fiber HD4i-P5000i Setting Up Fiber Inspection Test

SmartClass Fiber HD4i-P5000i Performing the Fiber Inspection Test

SmartClass Fiber HD4i-P5000i Configuring Profiles with FiberChekPro

SmartClass Fiber OLTS-85 Product Overview

SmartClass Fiber OLTS-85 Setting up and running a Tier 1 Test

SmartClass Fiber OLTS-85 Setting up a Test Reference

OLTS-85/85P Fiber Inspection, Cleaning, & Testing Technician Certification Exam

SmartClass Fiber OLTS-85/85P Performing a Loss Test

相关产品

P5000i光纤显微镜

MTS-4000 V2 平台

每一阶段的支持

我们倾力相助