FVD Benchtop Microscope with FiberChekPRO (Discontinued)

High-resolution bench-top inspection software

Benchtop Microscope & Automated Inspection & Analysis Software

This product has been discontinued.

This product has been discontinued

Please consider this product instead:

The FVD-series digital fiber microscope is used to inspect the polished surface or cleaved ends of fiber optic connectors. This high-resolution bench-top inspection microscope is ideally suited for post-polish inspection of high-quality end faces and can repeatedly detect scratches that may be missed by human technicians, delivering the level of sensitivity long sought in the industry. The FVD requires a connector adapter and PC to supply power to the unit through the USB 2.0 port. FiberChekPRO is an advanced application that determines the acceptability of optical fiber end faces through automated inspection and analysis. It identifies and characterizes defects and contamination and determines their location relative to the fiber core. It then provides a PASS or FAIL result according to a pre-configured failure criteria setting.

Applications

  • Inspect and analyze patch cords and jumper cables in manufacturing and quality assurance environments
  • Automatically capture and analyze fiber end face images, and obtain a PASS/FAIL result according to preconfigured criteria
  • Standardize fiber inspection and analysis process

Key Features

  • Determines acceptability of fiber end faces by utilizing an advanced automated inspection and analysis software
  • Ensures consistent results by removing human subjectivity from fiber inspection and grading
  • Identifies and characterizes each defect and contamination particle, and determines their location relative to the fiber core
  • Archives results and images as HTML or PDF formats and generates integrated reports
  • Plugs directly into PC/laptop via USB 2.0 connection
  • Produces clear detailed view of fiber end face conditions with high-resolution camera and coaxial illumination
  • FiberChekPRO pre-programmed with International Electrotechnical Commission (IEC) acceptance criteria standards for single-mode and multimode connectors.

Службы

Instrument Care Support Plans

Save up the 50% of standard service prices and obtain priority service when you buy a bundled plan at the same time the instrument is purchased. Care Support Plans offer the best way to purchase extended warranty, premium technical support, self-paced training, and critical maintenance services like calibration services that include software and engineering change order update services to ensure your product is maintained with current software and a calibration certificate. These discounted plans are 2-5 years long when purchased upfront with your VIAVI instruments.


Техническая поддержка VIAVI Care

УслугиBronzeCareSilverCareMaxCareGoldCareFleetCare
 BronzeCareSilverCareMaxCareGoldCareFleetCare
Техническая поддержкаПремиумПремиумПремиумПремиумПремиум
Заводской ремонт

Стандартные услуги + специальное меню.
 Калибровка и обучение на местах, выезд инженера технической поддержки,
заказная разработка или подписка на ПО

Приоритетное обслуживание
Онлайн-обучение

Гарантия 5 лет на аккумулятор и сумку*

 
Заводская калибровка 

Гарантия на аксессуары

  
Экспресс-кредиты  

* только для 5-летних программ

Гарантия на замену батареи/сумки
Батареи и сумки изнашиваются от каждодневного использования и в результате циклов зарядки. Чтобы этот фактор не повлиял на результативность работы, в 5-летних программах предусмотрена возможность замены аксессуаров.

VIAVI обеспечивает разовую замену вышедшей из строя батареи и изношенной сумки/перчатки в течение 5-летней программы поддержки SilverCare или MaxCare. Замена проводится только при возврате оборудования в VIAVI на ремонт или калибровку. Программа не охватывает жесткие футляры и не распространяется на оборудование, продаваемое без сумки/батареи.

Действует на 5-летних программах Silver и MaxCare.

Экспресс-кредиты
Now you can schedule calibrations or repairs with no downtime. The Express Loaner Service provides you with a similarly configured piece of equipment before sending yours in for calibration or for that unexpected repair that you need immediately.

Замена аксессуаров MaxCare
Контрольно-измерительное оборудование поставляется с кабелями и разъемами. Для обеспечения достоверности тестирования программа включает в себя замену одного аксессуара один раз в год.

Если аксессуар будет признан дефектным или вышедшим из строя, VIAVI заменит или отремонтирует его (по своему усмотрению) бесплатно для клиента. Замененные аксессуары могут быть новыми или восстановленными. Все возвращенные аксессуары становятся собственностью VIAVI. Действуют следующие ограничения: допускается замена не более чем одного аксессуара в течение 12 месяцев; программа распространяется только на те аксессуары, которые считаются незаменимыми для работы оборудования и поставлялись с изначально приобретенным продуктом. Клиент несет обязательство по отправке вышедшего из строя аксессуара в VIAVI, если его надежность вызвала вопросы во время калибровки или ремонта.


Программы технической поддержки - Fiber Benchtop Microscopes

Тип продуктаРекомендуемая программаBronzeCareSilverCareMaxCareДля чего нужна калибровка?
  BronzeCareSilverCareMaxCare 
Fiber Microscope P5000iBronze-5Калибровка не требуется
Настольные микроскопы FVAiBronze-5Калибровка не требуется
Настольные микроскопы FVDiBronze-5Калибровка не требуется

VIAVI Care Support for Existing Equipment

FleetCare
FleetCare

FleetCare plans can be customized to include any service entitlements on your fleet of existing equipment. Please fill out a Service Contracts form for a quote.

  • Any collection instruments with a single coterminous renewal date
  • Each contract is customized with any number of annual terms required by the customer
  • Onsite Calibration, Training, Field Application Engineer days can be added

View Support Plans For Existing Equipment


Repair and Calibration

Our products live in rugged environments for over 10 years with 1000s of test connect/disconnect cycles.  We will be there to support you to ensure components that require maintenance like connectors, batteries, and software updates to ensure you are ready to test accurately for years to come. We apply factory procedures that use fast, automated calibration and functional verification, maintenance using OEM parts and the application of all engineering change orders and software updates. Services are available through contract Care plans, FleetCare or per incident as requests. 

Top 4 Reasons to Choose VIAVI for Your Repair and Calibration Needs:

  • Minimize business disruption
  • Budget
  • Measurement Accuracy and Product Reliability
  • Measurement Compliance, TL9000 certification and OEM Standards

Explore More


С чего начать?

Желаете увидеть демонстрацию нашей продукции? Обращайтесь к нам для получения дополнительной информации, ценовых предложений, а также сведений об оформлении заказа.