Xgig CEM 8-lane Interposer Module for PCI Express 5.0

Interposer Module for PCI Express 5.0 Platform

The PCIe 5.0 8-lane CEM Interposer enables debug and verification of new ICs, new system hardware designs, FPGA firmware, validation of system BIOS and software.

Xgig CEM, 8-lane Interposer Module for PCI Express 5.0

The VIAVI Solutions Xgig® 8-lane CEM Interposer for PCI Express® 5.0 enables debug and verification of new ICs, new system hardware designs, FPGA firmware, validation of system BIOS and software—and supports manufacturing test. It provides connection between the VIAVI PCIe 5.0 Analyzer/Exerciser/Jammer platform and a system under test. This Interposer installs into an 8 or 16-lane PCIe CEM slot which are common on many servers, workstations, and desktop PCs. It operates at the 32GTps, PCIe 5.0 rate, across up to 8-lanes (bi-directional).

Benefits

  • Provides consistent, repeatable capture of link training, equalization negotiation and other data 
  • Faster analysis and problem isolation
  • Quicker time to market and earlier revenue
  • Lower engineering costs

Applications

  • Supported by VIAVI Analyzer tools for trace capture with filter, trigger and more 
  • Supports error injection for deep system analysis
  • Works together with the VIAVI Xgig5PK-PCIe5-X16-PF and Xgig5PK-PCIe5-X8-PF Analyzer/Exerciser/Jammer platforms 

Highlights

  • Supports link widths up to and including 8-lanes 
  • Operates up to 32GTps, PCIe 5.0 data rates 
  • Downward compatible with PCIe 1.0, 2.0, 3.0 and 4.0, and data rates of 2.5, 5.0, 8.0 and 16GTps 
  • A top edge 16-lane CEM slot connector accepts all endpoint DUT adapter cards 
  • Bottom edge 8-lane PCB finger connector installs into host test system’s 8 or 16-lane PCIe slot 
  • Data path uses high-speed linear redrivers to ensure good signal capture with minimal tuning effort 
  • Supports Analyzer side-band signal triggering and capture via custom cable 
  • Interposer power is independent of host system. A 120/220 AC in, 12V/3A DC out converter is included 
  • Custom, exchangeable brackets enable secure chassis and endpoint card installations 
  • LEDs give quick indication of power and operation 
  • Design is based on the Card Electro-Mechanical (CEM) specification 
     

Primeros pasos

¿Le interesa una demostración de algún producto? Póngase en contacto con nosotros para obtener más información, recibir un presupuesto o averiguar cómo adquirir un producto.