OneAdvisor 1000 为技术人员和工程师提供安装和维护高容量网络所需的所有测试功能。OneAdvisor 1000 支持新兴技术和传统技术，非常适合用于城域网/核心网、数据中心互连以及商业服务测试。
在技术生命周期的这个阶段，现场 400Gbps 服务非常少见，而找到便携式设备来测试这些环路是一个挑战。VIAVI OneAdvisor 1000 测试仪具备绰绰有余的任务完成能力，提供了全速率和协议覆盖来解决 400G 链路的服务激活、故障排查和维护。借助诸如 QSFPx 和 SFPx 插拔模块的光学器件自测试、数据中心高速线缆测试、RFC 2544/Y.1564 和 OTN 检查等高级测试，技术人员和工程师可以比以往更快、更准确地测试大容量网络。
主要特性
- 通过连接器和接口提供的 PAM-4 原生支持也可以测试 400GE
- QSFP-DD 和 SFP-DD 接口
- 与诸如 OTDR 和 WDM 通道检查仪等光纤光学测试模块兼容
- 测试包括 400GE 速率的 PAM-4 和 KP4 FEC 在内的新技术
- 具备可扩展和模块化特点
其他资源：
资料
案例研究
海报
快速参考
- Network & Service Companion - Ethernet Layer 2 Traffic Loopback
- OneAdvisor 1000 - 4100-series OTDR, Expert OTDR
- OneAdvisor 1000 - 4100-series OTDR, Smart Test Assistant
- OneAdvisor 1000 - Exporting System Information and Software Option Inventory
- OneAdvisor 1000 100G Module - DS3 Bit Error Rate Testing (BERT)
- OneAdvisor 1000 100G Module - Ethernet Layer 2 Traffic Loopback
- OneAdvisor 1000 100G Module - Ethernet RFC 2544 Layer 2 Traffic
- OneAdvisor 1000 100G Module - Ethernet Y.1564 L2 Multiple Streams
- OneAdvisor 1000 100G Module - SONET Bit Error Rate Testing (BERT)
- OneAdvisor 1000 100G Module - T1 Bit Error Rate Testing (BERT)
- OneAdvisor 400G Module - Ethernet Layer 2 Traffic Generation
- OneAdvisor 400G Module - Ethernet Layer 2 Traffic Loopback
- OneAdvisor 400G Module - Ethernet RFC 2544 Layer 2 Traffic
- OneAdvisor 400G Module - Ethernet Y.1564 Layer 2 Traffic
- T-BERD/MTS-5800 - 5GNR Discovery
- T-BERD/MTS-5800 - CPRI Check, Dark Fiber and WDM Loopback Testing
- T-BERD/MTS-5800 - CPRI Check, RRU Connectivity Testing
- T-BERD/MTS-5800 - CPRI Check, RRU Testing with Nokia/ALU BBU Emulation and RF over CPRI Spectrum Analysis
- T-BERD/MTS-5800 - CPRI Check, SFP/SFP+ Loopback Testing
- T-BERD/MTS-5800 - DS1 PPP Ping Testing (T1 MPLS)
- T-BERD/MTS-5800 - Enabling the GNSS/GPS Receiver for Sky Plot, One-Way Delay, and Sync Measurements
- T-BERD/MTS-5800 - Ethernet 4x10GigE Link Aggregation Loopback
- T-BERD/MTS-5800 - Ethernet 4x10GigE LInk Aggregation Traffic Generation
- T-BERD/MTS-5800 - Ethernet 4x10GigE LInk Aggregation Y,1564 test
- T-BERD/MTS-5800 - Ethernet AOC/DAC Breakout Cable Testing
- T-BERD/MTS-5800 - Ethernet AOC/DAC Cable Testing
- T-BERD/MTS-5800 - Ethernet J-Profiler VLAN Analysis
- T-BERD/MTS-5800 - Ethernet Layer 2 Traffic Generation
- T-BERD/MTS-5800 - Ethernet Layer 3 IPv4 Ping Test
- T-BERD/MTS-5800 - Ethernet Layer 3 Multicast Analysis
- T-BERD/MTS-5800 - Ethernet Layer 3 Multicast Traffic
- T-BERD/MTS-5800 - Ethernet Layer 3 Traffic Generation
- T-BERD/MTS-5800 - Ethernet Layer 3 Traffic Loopback
- T-BERD/MTS-5800 - Ethernet Optics Self-Test
- T-BERD/MTS-5800 - Ethernet Packet Capture from an Optical TAP, v28.0
- T-BERD/MTS-5800 - Ethernet Packet Capture from SPAN port, v28.0
- T-BERD/MTS-5800 - Ethernet Packet Capture in Copper 10-100-1000 Dual Through Mode v28.0
- T-BERD/MTS-5800 - Ethernet Packet Capture in Optical SFP Through Mode v29.0
- T-BERD/MTS-5800 - Ethernet RFC 2544 Layer 3 Traffic
- T-BERD/MTS-5800 - Ethernet RFC 6349 TrueSpeed Test to Fusion VNF
- T-BERD/MTS-5800 - Ethernet Voice over IP (VOIP) SIP Trunk Testing
- T-BERD/MTS-5800 - Ethernet Y.1564 L2 Traffic
- T-BERD/MTS-5800 - Fiber Channel Layer 2 Traffic
- T-BERD/MTS-5800 - ISDN Primary Rate Interface (PRI) Testing
- T-BERD/MTS-5800 - Monitoring DS1 Signals at a Digital Cross Connect Panel
- T-BERD/MTS-5800 - One Way Delay (OWD) Measurement
- T-BERD/MTS-5800 - OTN Check Test
- T-BERD/MTS-5800 - Tuning SFP+ Transceiver
- T-BERD/MTS-5800 – Ethernet Layer 4 TCP WireSpeed Throughput Test to an iPERFv3 Server
软件和固件版本
视频
Care Support Plans
| Product Group | Recommend Plan | Bronze | Silver | Maxcare | Why Calibrate? |
|---|---|---|---|---|---|
| OneAdvisor 1000 (ONA-1000) | Silver-5 | Why calibrate this product? What are the common issues? |
-
VIAVI Care Support for Existing Equipment
图像
FleetCareFleetCare plans can be customized to include any service entitlements on your fleet of existing equipment. Please fill out a Service Contracts form for a quote.
- Any collection instruments with a single coterminous renewal date
- Each contract is customized with any number of annual terms required by the customer
- Onsite Calibration, Training, Field Application Engineer days can be added
-
Repair and Calibration
Our products live in rugged environments for over 10 years with 1000s of test connect/disconnect cycles. We will be there to support you to ensure components that require maintenance like connectors, batteries, and software updates to ensure you are ready to test accurately for years to come. We apply factory procedures that use fast, automated calibration and functional verification, maintenance using OEM parts and the application of all engineering change orders and software updates. Services are available through contract Care plans, FleetCare or per incident as requests.
Top 4 Reasons to Choose VIAVI for Your Repair and Calibration Needs:
- Minimize business disruption
- Budget
- Measurement Accuracy and Product Reliability
- Measurement Compliance, TL9000 certification and OEM Standards
-
Refurbished Equipment
Save on the test equipment you trust and purchase VIAVI pre-owned test equipment with confidence.
Top reasons for buying used test equipment un the VIAVI Encore program
- Cost saving: Round out your test instrument set at a discount.
- Accelerated delivery time: The product is ready to ship as soon as it is announced.
- 1 year warranty, calibration and OEM approved parts are included in the refurbishment
- Environmentally friendly reuse reduces e-waste and pollution
- Maintaining consistent procedures across your team is easy when everyone is using the same tool
Is Instrument Trade-In to Trade up available?
Yes! You can often trade in products you have owned for a few years and upgrade to the latest and greatest fleet for your team through the VIAVI trade in program. Please work with your sales representative to obtain a trade-in to trade-up quotation.
Training Courses
Training Courses
每一阶段的支持
我们提供您所需的支持、服务、全面培训以及资源。这只是我们为最大程度提升您投资的价值所作努力的一部分。
我们倾力相助
我们倾力相助，为您获得成功加油。