mTFX はモジュール式イーサネットまたは GPIB 計測器で、PC ベースのオートメーションシステムから直接管理できます。光ネットワーク技術を作りかえたり、専用インターフェイスカードで複雑なライブラリを使用したりする必要性を排除します。
次世代 LCOS(Liquid Crystal on Silicon:反射型液晶)テクノロジーに基づく mTFX-C1 は、チューナブルフィルター以上のものです。可変アッテネータ、スイッチ、パワーメーター、DWDM マルチプレクサーの機能を統合することで、コヒーレントインターフェイスやアンプ、DWDM システムのフォトニックテストを大幅に簡素化します。TrueFlex™ テクノロジーを活用することで、フィルターは連続して中心波長と帯域幅のチューニングが可能となり、ITU グリッドに縛られることはありません。既に確立されている接続を中断することなく、すべてのサブ GHz 分解能の複数並列波長経路を作成できます。業界トップの低損失と帯域外フィルター仕様により、テスト信号に対する影響は最小限になります。
mTFX を使用して、適切なパワーで正しいテストポートへの適切な波長を得て、シンプルで直感的な GUI や SCPI ベースのリモートコマンドを使用して、任意の波長または波長グループを柔軟に分離、グルーミング、管理、およびルーティングします。
特長
- 0.5GHzの分解能で16GHz~5100GHzの範囲で帯域幅の調整が可能なチューナブルフィルター
- 低損失(<5.5dB)、連続拡張Cバンドカバレッジ、波長確度±3.5GHz
- 最大 120 個(L バンドの場合)および 180 個(C バンドの場合)の独立したフィルターで、それぞれ独立した減衰量と出力ポート割り当てが可能。
- 既存の接続を中断することなくフィルターの追加/削除が可能
- 自動シングル/マルチピーク検出アルゴリズム付き内部パワーメーターオプション
- 伝送パワー損失のない自動ピーク追跡機能
- フィルター生成用の高速でシンプルな GUI と SCPI 制御インターフェイス
- オプションの SW ライセンスで最大 8 つの出力ポートをサポート
- シングルスロットカセットで提供される C バンドおよびデュアルスロットで提供される L バンド
アプリケーション
- 光通信テストの自動化
- 100G+ コヒーレントインターフェイステスト
- ROADM ノードエミュレーション
- DWDM システムテスト中の信号抽出または挿入
- アンプによる利得スペクトラム管理とロードトーン生成
- OSNR 測定
MAP-220C マルチアプリケーションプラットフォーム
MAP-300 マルチアプリケーションプラットフォーム(MAP)
Software Downloads
サービス
Instrument Care Support Plans
Save up the 50% of standard service prices and obtain priority service when you buy a bundled plan at the same time the instrument is purchased. Care Support Plans offer the best way to purchase extended warranty, premium technical support, self-paced training, and critical maintenance services like calibration services that include software and engineering change order update services to ensure your product is maintained with current software and a calibration certificate. These discounted plans are 2-5 years long when purchased upfront with your VIAVI instruments.
VIAVI Care Support
ケアサポートプラン - MAP
製品タイプ | 推奨プラン | BronzeCare | SilverCare | MaxCare | 校正する理由は? |
---|---|---|---|---|---|
![]() | ![]() | ![]() | |||
MAP (Mainframe/Module) | Bronze-3 | Factory standards to ensure accuracy MAPWhy calibrate this product?It is essential in manufacturing environment to ensure your product meets the published/customer requirements. Having accurate measurements ensures highest possible yields whilst maintaining product specifications. Ensuring all that the optical test equipment is performing as designed and calibrated is requirement in achieving that goal. Viavi will validate measurement accuracies conform to published specifications. Maintain connectors and pigtails. Factory standards to ensure accuracyVIAVI is a TL9000 company and calibrates this instrument based on general requirements for the competence of calibration and testing laboratories (ISO/IEC 17025:2005) to ensure your instrument is certified to measure accurately. Instruments that are out of calibration will produce unreliable measurements and can create false passing or false failing test results that often cause your team repeat work. We maintain, polish and clean all fiber connectors, fix pigtail connections that are internal to the product to ensure all parts stay in good working order and upgrade software / firmware to the latest approved release to enable enhancements. VIAVI Care Plans are the most cost-effective way to plan for calibration with a low, discounted price at the time of instrument purchase. Fixed rate calibration can also be purchased later via a separate purchase order.
Most business common implications MAPHow will my measurements be affected if the product is out of calibration?Inaccurate measurements may prevent verification of power levels or introduce other measurement uncertainties, errors and artifacts. Out-of-calibration instruments can result in design errors, production problems, end customer escalations, increased failure rates, audit non-compliance or even ultimately loss of business. What are the most common implications of these issues to the business?
Common Business impacts include:
|
VIAVI Care Support for Existing Equipment
![]() FleetCare | FleetCare plans can be customized to include any service entitlements on your fleet of existing equipment. Please fill out a Service Contracts form for a quote.
|
Repair and Calibration
Our products live in rugged environments for over 10 years with 1000s of test connect/disconnect cycles. We will be there to support you to ensure components that require maintenance like connectors, batteries, and software updates to ensure you are ready to test accurately for years to come. We apply factory procedures that use fast, automated calibration and functional verification, maintenance using OEM parts and the application of all engineering change orders and software updates. Services are available through contract Care plans, FleetCare or per incident as requests.
Top 4 Reasons to Choose VIAVI for Your Repair and Calibration Needs:
- Minimize business disruption
- Budget
- Measurement Accuracy and Product Reliability
- Measurement Compliance, TL9000 certification and OEM Standards