FiberChekプローブマイクロスコープ
あらゆる技術者に必須のファイバーツール
FiberChekプローブはファイバー検査におけるVIAVIの業界をリードする専門知識に基づく、単一の「オールインワン」型のハンドヘルドソリューションです。あらゆるファイバー技術者がこの完全に自律したハンドヘルド（携帯）型デバイスを使用して今日のファイバー検査ニーズに対応することができます。 内蔵の画像表示、オートフォーカス、合否解析、結果の保存/呼び出しにより、検査ワークフローを完全に自動化し、高速で正確なパフォーマンスを実現します。単独または他のデバイスに接続した使用（WiFi、Bluetooth、USB）のどちらの形態で使用するにしても、FiberChekプローブはあらゆる技術者にとって必須のファイバーツールです。
利点
- 「オールインワン」ソリューションで完全に自律的な検査を実現
- 検査ワークフローを自動化
- 正確で迅速なテストパフォーマンスを実現
- どの場所でも容易に接続にアクセス
- 何にでも接続してどこでもテストできる
アプリケーション
- パッチコードとバルクヘッド両方のファイバー端面の検査
- 証明レポートで端面状態を保証
- 即時にファイバー端面イメージを取得、解析、評価して、事前設定されている基準に従って合否結果を取得
主な特徴
- ライブのファイバー表示機能を持つタッチスクリーン内蔵
- オートセンター
- オートフォーカス
- 内蔵ファイバー端面解析の内蔵
- ユーザー選択可能な合格プロファイル
- デバイスに結果を保存/エクスポート
- Bluetooth、WiFi、USB接続機能
-
Configure Your Microscope
Use this tool to setup your microscope for the connectors you are inspecting
Part of The VIAVI Remote PHY Solution
This product is part of the comprehensive VIAVI Remote PHY turn-up and maintenance solution enabling seamless transitions from legacy to distributed access architectures.
ソフトウェアのダウンロードと更新
ビデオ
- Better with VIAVI
- Fiber Inspection Solutions Overview
- FiberChek Probe - Attaching Inspection Tips
- FiberChek Probe - Inspecting a Simplex Fiber Patch Cord With a Bulkhead Tip
- FiberChek Probe - Inspecting an MPO Fiber Patch Cord With a Bulkhead Tip
- FiberChek Probe: Fully Automated Test Cycle
- FiberChekPRO: Device Setup & Firmware Updates
- FiberChekPRO: Overview of "Job" Mode
- Inspect Before You Connect Video Series
- Light Reading: Perspective on Fiber Trends in Communications Networks
- The Race is On to Deliver Gigabit Broadband Services to the Home
- The VIAVI FiberChek at the 2016 SCTE Cable Tec Expo
- VIAVI Fiber Inspection Solutions for Every Application
- VIAVI Fiber Inspection Solutions That Optimize Accessibility
Video Gallery
ウェビナー
アプリケーションノート
クイックリファレンス
- Auto Tip Setting on the VIAVI FiberChek Inspection Probe
- FiberChek Probe - PON Fiber Inspection
- Quick Card: FiberChek Probe - Fiber Inspection with FiberChekMOBILE Android
- Quick Card: FiberChek Probe - Fiber Inspection with FiberChekMOBILE iOS
- Quick Card: FiberChek Probe - Fiber Inspection with FiberChekPRO
- Quick Card: FiberChek Probe - Fiber Inspection with Pass/Fail Analysis
- Quick Card: FiberChek Probe - Syncing to Stratasync with FIberChekPRO PC Software
- Quick Card: FiberChek Probe - Updating Firmware with FiberChekPRO
- Quick Tech Tip: Inspecting MPO Cables is Critical
- Quick Tech Tip: Introduction to Deep Fiber Node +0
- Quick Tech Tip: Quickly Find Fiber-to-the-Antenna (FTTA) Issues
- Quick Tech Tip: Testing CWDM in Deep Fiber Applications
- Quick Tech Tip: Testing DWDM in Deep Fiber Applications
- Quick Tech Tip: Testing PON in Deep Fiber Applications
- Quick Tech Tip: Troubleshooting Fiber-to-the-Home (FTTH)
ケーススタディ
ソフトウェアおよびファームウェアのリリース
データシート
パンフレット
ポスター
ホワイトペーパーおよび書籍
- Achieving IEC Standards Compliance for Fiber Optic Connector Quality
- Enhancements and Implications of IEC 61300-3-35 Edition 3 for Fiber Optic Connector Inspection
- Test Guide to DAA Planning Deployment & Maintenance
- Testing 5G: Tools and Techniques for Successful Implementation, Maintenance and Monetization
- When a speck of dust looms as large as an iceberg
- Winning with MPO Testing
マニュアルおよびユーザーガイド
選択ガイド
- Corning OptiTip MT Connector Inspection with FBPT-COD-MTx Kit
- Fiber Inspection Guides for MIL-PRF-28876 Connectors
- Fiber Inspection Tips and Adapters (Interactive Selection Guide)
- Fiber, Transport, and Business Services Test Solutions for HFC Networks
- Inspecting FTTH Terminals
- Inspection, Cleaning and Test Solutions for CS, SN, and MDC Fiber Connectors
- ODC Connector Inspection Solutions
- Test and Certification Solutions for Contractors
- Test and Maintenance Solutions for Enterprise and Data Center Operators
- Test and Monitoring Solutions for Fiber to the Antenna (FTTA)
- Test Solutions for HetNets
- フィールド向け端面検査用チップ 2026 年 3 月
Care Support Plans
| Product Group | Recommended Plan | Bronze | Silver | Maxcare | |
|---|---|---|---|---|---|
| FiberChek Probe Microscope | Bronze-5 | Does the product require calibration? Common questions or issues |
-
VIAVI Care Support for Existing Equipment
FleetCare plans can be customized to include any service entitlements on your fleet of existing equipment. Please fill out a Service Contracts form for a quote.
- Any collection instruments with a single coterminous renewal date
- Each contract is customized with any number of annual terms required by the customer
- Onsite Calibration, Training, Field Application Engineer days can be added
-
Repair and Calibration
Our products live in rugged environments for more than 10 years with 1000s of test connect/disconnect cycles. We will be there to support you to ensure components that require maintenance like connectors, batteries, and software updates are ready to test accurately for years to come. We apply factory procedures fast, automated calibration and functional verification, maintenance using OEM parts, and the application of all engineering change orders and software updates. Services are available through contract Care plans, FleetCare or per incident as requested.
Top 4 Reasons to Choose VIAVI for Your Repair and Calibration Needs:
- Minimize business disruption
- Budget
- Measurement Accuracy and Product Reliability
- Measurement Compliance, TL9000 certification and OEM Standards
Training Courses
Self-Paced Online Training
Course Number
- Global
- English
- Other languages available upon request
- Self-Paced Online Training
Course Number
This course presents an overview of performing an OTDR test using the FTTH-SLM mode on the SmartOTDR tester. Learn how to set up an OTDR test for a 1x8 configuration, run the test, and locate, review and save test results.
- Global
- English
- Other languages available upon request
- Self-Paced Online Training
Course Number
This course presents an overview of the recommended Inspect Before You Connect (IBYC) process. Learn how to properly inspect, clean, and test fiber end-faces before making connections.
- Global
- English
- Other languages available upon request
- Self-Paced Online Training
Course Number
This course presents a solid foundation of understanding for Fiber Optic technology and concepts. Learn about fiber safety and standards, light propagation, network components and architecture, connectors and cable types, and fiber losses and attenuation process.
- Global
- English
- Other languages available upon request
- Self-Paced Online Training
Course Number
This course presents a solid foundation of understanding for Fiber Optic testing concepts. Learn about the importance of embracing the proper fiber inspection, cleaning, and basic fiber testing process and techniques, and the basic fiber tests and the tools needed to perform.
- Global
- English
- Other languages available upon request
- Self-Paced Online Training
Course Number
This course presents an overview of the key concepts for performing testing operations in Fiber-to-the-X (FTTX) networks and Passive Optical Networks (PONs). Learn about testing methods for FTTX and PON circuits, and how to test the Optical Signal-to-Noise Ratio (OSNR) in Reconfigurable Optical Add Drop Multiplexer (ROADM) networks.
- Global
- English
- Other languages available upon request
- Self-Paced Online Training
Course Number
This course presents an overview of IP Routing concepts and the operation of Multi Protocol Label Switching networks. Learn about the routing equipment and protocols, and how data flows through the network.
- Global
- English
- Other languages available upon request
- Self-Paced Online Training
Course Number
This course presents an overview of the key concepts for Internet Protocol (IP; ISO Layer 3) technology. Learn about the topology, protocol-oriented network problems and real-world issues that impact quality of service, how to perform testing and isolate faults.
- Global
- English
- Other languages available upon request
- Self-Paced Online Training
Course Number
This course presents an overview of the key concepts for IPTV networks and technology. Learn about IPTV protocols and basic MPEG fundamentals, requirements for proper operation, and IPTV testing methods.
- Global
- English
- Other languages available upon request
- Self-Paced Online Training
Course Number
This course presents an overview of performing an OTDR test using the FTTH-SLM mode on the SmartOTDR tester. Learn how to set up an OTDR test for a 1x8 configuration, run the test, and locate, review and save test results.
- Global
- English
- Other languages available upon request
- Self-Paced Online Training
Course Number
This course presents an overview of the various xDSL technologies and networks. Learn about the xDSL variations and rates, copper line characteristics, network components and topologies, and the testing process.
- Global
- English
- Other languages available upon request
- Self-Paced Online Training
Course Number
This course presents the technical foundation necessary to gain a basic understanding of the Optical Time Domain Reflectometer (OTDR) test. Learn the best practices for performing OTDR tests and how to understand the OTDR trace results.
- Global
- English
- Other languages available upon request
- Self-Paced Online Training
Course Number
This course presents a detailed overview of the technology fundamentals including the topology, network problems and fault isolation, and real-world issues that impact quality of service as well as fiber inspection techniques and connectivity/continuity tests. Learn the recommended approach for how to test and evaluate the performance of DWDM networks using OTDR and PMD tests. Understand how to confidently troubleshoot network faults and locate problems in DWDM networks.
- Understand light propagation, DWDM network components and architecture, connectors and cable types, fiber losses and attenuation process, and the recommended fiber inspection and cleaning techniques
- Describe the multiplexing process
- Define PMD and why it needs to be measured
- Understand the operation of an OTDR test and what conditions impact the accuracy of it
- Describe the recommended approach to DWDM and PMD testing and for troubleshooting
- Global
- English
- Other languages available upon request
Course Number
This course presents a detailed overview of technology fundamentals including the topology, protocol-oriented network problems, fault isolation, and real-world issues that impact quality of service. Learn the recommended layered/structured approach for testing and troubleshooting techniques to test and certify Ethernet circuits, including proper fiber inspection techniques.
- Understand the fundamental operation of Ethernet/IP networks including the network components and architecture, connectors and cable types, errors and alarms
- Comprehend the purpose and need for auto-negotiation, Ethernet switching, flow control, and prioritization functions
- Detail the structured approach to test and troubleshoot Ethernet/IP networks including VLANs
- Describe the the characteristics of the TCP/IP protocol suite and how to perform protocol analysis on an IP network
- Become familiar with how to employ the RFC 2544 and Y.1564 automated testing scripts
- Global
- English
- Other languages available upon request
Course Number
This course presents a detailed overview of the basic technology fundamentals including the topology, network problems and fault isolation, and real-world issues that impact quality of service as well as fiber inspection techniques and connectivity/continuity tests. Learn the recommended approach for how to characterize and certify fiber using three key fiber tests, fiber inspection, connectivity/continuity and OTDR for FTTx, FTTP, and FTTA. Understand how to confidently troubleshoot network faults and locate problems in xWDM and PON networks.
- Understand light propagation, network components and architecture, connectors and cable types, fiber losses and attenuation process
- Describe the causes of loss in fiber networks
- Understand the recommended fiber inspection and cleaning techniques and describe the proper process to perform fiber optic connectivity/continuity and OTDR tests
- Global
- English
- Other languages available upon request
Course Number
This course presents a detailed overview of the technology fundamentals and Passive Optical Networks (PONs) including the topology, network problems and fault isolation, and real-world issues that impact quality of service as well as fiber inspection techniques and connectivity/continuity tests. Learn the recommended approach for how to characterize and certify fiber using three key fiber tests, fiber inspection, connectivity/continuity and OTDR for FTTx, FTTP, and FTTA. Understand how to confidently troubleshoot network faults and locate problems in FTTx and PON networks.
- Understand light propagation, network components and architecture, connectors and cable types, fiber losses and attenuation process
- Describe the causes of loss in fiber networks
- Understand the recommended fiber inspection and cleaning techniques
- Describe the proper process to perform fiber optic connectivity/continuity tests
- Understand the fundamental operation of an OTDR test
- Describe what conditions impact the accuracy of the OTDR test
- Detail the steps involved in the process to perform an OTDR test including event analysis
- United States
- English
- Other languages available upon request