OneAdvisor 800 Wireless Platform

A NITRO Wireless Product

All-in-One Cell Site Installation and Maintenance Test Platform

OneAdvisor-800

The VIAVI OneAdvisor 800 has been elegantly designed to verify and troubleshoot radio access networks of all types, from private 5G networks, to land mobile radio networks, to legacy networks still providing great service. The OneAdvisor 800 leverages multi-functional architecture, covering different test applications, scaling, and adapting to many different user groups, including:

Radio Construction: All test aspects of the transmission lines of any cell site are quickly tested with OneAdvisor 800: validate coaxial cable, antennas, as well as fiber characterization and inspection

Radio Operation: Easily verify a radio’s transmission according to 3GPP standards, maintain a radio’s power level and coverage, as well as the ability to identify and locate multiple types of signal interference.

OneAdvisor 800 Interference Finder

Highlights

  • Easy PIM Detection.  All bands with one device, non-customer impacting test, and all from the safety of the ground.  
  • Over-The-Air Sync and Timing. Remove the hassle of connecting to a network port to take network timing measurements. The OneAdvisor 800 is the first field-test device to perform fast OTA timing and sync analysis of 5G cell sites.
  • Easy Interference Analysis. With value-added features like TDD Automatic Gated Sweep (TAGS), the OneAdvisor 800 enables non-experts to confidently use a spectrum analyzer.  For example, TAGS automatically identifies the correct uplink time-slot format, then isolates the interfering signal.
  • Blind Scanner. Allows an engineer to step into an unknown RF environment and quickly identify the active channels in use whether LTE, DSS, or 5G, drastically cutting time at the site.  
  • Fiber Test. Critical elements in today’s mobile network, OneAdvisor 800 tests the cleanliness of fiber end-point connections as well as the integrity of a fiber cable with one of multiple VIAVI OTDRs that pair with it. 
  • X-Haul. With the same device, a technician can also test the transmission effectiveness of the wired network, whether fronthaul, mid-haul, or the high-capacity backhaul.

Accessories

Home Leakage Test Kit

Tighten up the home coaxial network with this kit, finding leaks using the technician's (DSP or ONX) signal level meter.

View Product


Featured Resources

Brochures

Application Notes

Brochures

Case Studies

Data Sheets

Offers

Posters

Quick References

Selection Guides

Software & Firmware Releases

White Papers & Books

Software Downloads

Instrument Care Support Plans

Save up the 50% of standard service prices and obtain priority service when you buy a bundled plan at the same time the instrument is purchased. Care Support Plans offer the best way to purchase extended warranty, premium technical support, self-paced training, and critical maintenance services like calibration services that include software and engineering change order update services to ensure your product is maintained with current software and a calibration certificate. These discounted plans are 2-5 years long when purchased upfront with your VIAVI instruments.


VIAVI Care Support

* 5-year plans only; if applicable

View Support Plans On New Equipment

Factory Repair

VIAVI Solutions is a single-source supplier for all of your factory and on-site test equipment repair, maintenance, and calibration service needs.

We offer return-to-factory, fixed-rate repair services for all VIAVI test equipment. Fixed-rate repair provides the best turnaround time, streamlining the overall repair process and creating a very predictable and reliable repair experience at the best pricing.

Our technicians ensure that your equipment is functioning properly by completing any maintenance and install enhancements,  including engineering change notice updates.

Find out more about our Factory Repair Services

Factory Calibration

Keeping your equipment in top-running shape with factory or onsite calibration services helps ensure your network will continue to operate at peak performance. A variety of options allow you to manage the logistics of calibrating your equipment, while maximizing your maintenance investment. Performing regular calibration of equipment ensures the accuracy of its measurements. Improper calibration, however can compromise a network and impact services.  

Keep your equipment in top-running shape with VIAVI On-site Services that help to ensure your network continues to operate at peak performance. It's the most cost-efficient and effective way to maintain equipment on a timetable that meets your requirements.

Find out more about our Calibration Services

Self-Paced Training

VIAVI offers self-paced technical and product training as a flexible, efficient, and cost-effective training delivery option. Self-paced training offers a flexible training option for small groups of employees or those located remotely or in multiple locations. It’s an ideal training solution for instructing technicians who work in the field and cannot attend on-site classes.

Find out more about our Training Services

Priority Service

VIAVI Care Plan Priority Services and Technical Expert Application Center (TAC) Service Levels for Field Portable Instruments used to test fiber, cable TV, xDSL, metro and wireless networks

All customers enjoy Standard Plus support during the product warranty period and can upgrade to Premium TAC by purchasing a VIAVI Care Support Plan.

The hallmark of our test platforms is evolving, modular test features to allow customers to keep pace with advancing communications technologies. The learning process is not just “one and done,” and field teams often have high rates of turnover.

Find out more about our Priority Services

Battery / Bag Replacement Coverage
Batteries and bags wear out with daily use and charge cycles. To ensure these items don't slow you down, our 5 year plans include a replacement over the life of your 5 year plan.

VIAVI will provide a one-time replacement of bad battery and worn soft bag/glove within the duration of a 5-year SilverCare or MaxCare Support Plan. Replacement will only be replaced when the instrument is returned to VIAVI for repair or calibration service. Hard cases are excluded, and coverage is not applicable for instruments sold without bag/battery.

This coverage is Included in 5 year Silver and MaxCare Plans

Technical Assistance
The VIAVI Technical Support team can assist you in using/configuring products or address issues regarding product performance.

Visit our Technical Assistance section for more information.

MaxCare Accessory Replacement Coverage
Instrument products come with accessory cables and connector tips. To ensure reliable, accurate testing we will cover the replacement of one accessory annually, to ensure good test results.

When an accessory has been determined to be defective or faulty, VIAVI will, at no charge to customer, either repair the accessory or exchange at VIAVI’s discretion. Exchanged accessories may be new or refurbished. All returned accessories become property of VIAVI. The following limitations apply: no more than one accessory may be exchanged per 12 month period; applicable accessories include only those accessories that are considered essential to the operation of the instrument and were shipped with the original purchased product. The Customer is responsible for shipping faulty accessory back to VIAVI when there is a concern or during a calibration or repair service event.

Express Loaner
Now you can schedule calibrations or repairs with no downtime. The Express Loaner Service provides you with a similarly configured piece of equipment before sending yours in for calibration or for that unexpected repair that you need immediately.


Care Support Plan - OneAdvisor 800

ProductRecommended Plan (Part Number)BronzeCare
BronzeCare
SilverCare
SilverCare
MaxCare
MaxCare
Why calibrate?
OneAdvisor 800 (ONA-800)MaxCare-5

Why calibrate this product?
What are the common issues?


VIAVI Care Support for Existing Equipment

FleetCare
FleetCare

FleetCare plans can be customized to include any service entitlements on your fleet of existing equipment. Please fill out a Service Contracts form for a quote.

  • Any collection instruments with a single coterminous renewal date
  • Each contract is customized with any number of annual terms required by the customer
  • Onsite Calibration, Training, Field Application Engineer days can be added

View Support Plans For Existing Equipment


Repair and Calibration

Our products live in rugged environments for over 10 years with 1000s of test connect/disconnect cycles.  We will be there to support you to ensure components that require maintenance like connectors, batteries, and software updates to ensure you are ready to test accurately for years to come. We apply factory procedures that use fast, automated calibration and functional verification, maintenance using OEM parts and the application of all engineering change orders and software updates. Services are available through contract Care plans, FleetCare or per incident as requests. 

Top 4 Reasons to Choose VIAVI for Your Repair and Calibration Needs:

  • Minimize business disruption
  • Budget
  • Measurement Accuracy and Product Reliability
  • Measurement Compliance, TL9000 certification and OEM Standards

Explore More


Refurbished Equipment

Save on the test equipment you trust and purchase VIAVI pre-owned test equipment with confidence.

Top reasons for buying used test equipment un the VIAVI Encore program

  • Cost saving: Round out your test instrument set at a discount.
  • Accelerated delivery time: The product is ready to ship as soon as it is announced.
  • 1 year warranty, calibration and OEM approved parts are included in the refurbishment
  • Environmentally friendly reuse reduces e-waste and pollution
  • Maintaining consistent procedures across your team is easy when everyone is using the same tool

Is Instrument Trade-In to Trade up available?

Yes! You can often trade in products you have owned for a few years and upgrade to the latest and greatest fleet for your team through the VIAVI trade in program.  Please work with your sales representative to obtain a trade-in to trade-up quotation.

Explore More


Product Training Options

Self-Paced Online Training and Certification

Learn to use the functionality and features of VIAVI Solutions' products online, 24 hours a day, 7 days a week followed by a certification test upon completion of all modules.

 Self-Paced Online Training and Certification

Virtual Classroom and Certification

Instructor led Coursework: Learn from an expert Instructor from the convenience of your desk. Build your skill sets using VIAVI Solutions products to test various technologies with test and certification upon completion.

On-Site Classroom and Live Lab Workshops with Certifications

On-Site Classroom and Live Lab Workshops with Certifications

Instructor led Coursework: Build expertise using your VIAVI products in live lab exercises with test and certification upon completion. Utilize optional workshop days for field test on your network with your instructor.

Mentorship Consulting & System Admin Training

Instruments: Mentorship Test Procedure Consultation: Application Engineer Days. One of our test experts will come to your site and conduct testing with your team to troubleshoot stubborn problems or write up test procedures.

Explore More


How to Get Started

Interested in a product demonstration? Contact us for more info, receive a price quote, or find out how to buy.