How to: MTS- 4000 Firmware recovery procedure
Knowledge Base - How To
How to: MTS- 4000 Firmware recovery procedure
MTS4000 recovery mode Step-by-step procedure:
- Install the latest MTS-4000 FW from your PC on a USB pen drive formatted in FAT32: http://4k.updatemyunit.net
- Power off the MTS-4000
- Plug the charger on the unit an be sure that you are at least 80% charged befor starting the upgrade
- Connect the Pen Drive to the USB port on the MTS-4000
- Press at the same time “shift” + “Setup” keys and while holding this keys pressed, press ON
- This will start the recovery SW mode on the unit