VIAVI TestCenter: 5.01 - Select RX port under Detailed Stream Results view not showing ONLY streams under that specific port.

When using "Select Tx Ports" and "Select Rx Ports" filters under Streams > Detailed Stream Results, the view displays ALL streamblocks on the configuration that has "Tx Port" as the one selected on the "Select Tx Ports", however, the filtered view is also showing some other streamblocks that has the expected "Tx Port" but no the expected "RX Ports" (As specified on "Select Rx Ports") On the configuration below, filters are as follows: "Select Tx Ports" -> Port //7/9"Select Rx Pors" -> Port //7/10 The only Streamblock that has Tx Port = Port //7/9 and Rx Port = Port //7/10 is the one called "Port9_to_Port10". But we can see the Detailed Streams Results (after the filter) is also listing Streamblocks "Port9_to_Port12" and "Port9_to_Port11", showing Rx Port Names as NA, those 2 additional streamblock has "Tx Port" = Port //7/9 but any of them have RX Port = Port //7/10 (Actually as the streamblock name states, one is intended to Rx Port 12, and the other one to Rx Port 11)    

N/A