VIAVI TestCenter: The Application is getting unresponsive after some time of running an OSPF test.

• The VIAVI application is getting stuck and not responding for some time. • After some minutes it gets back to normal • This issue is seen while performing the following actions: • Starting devices • Resolving ARP • Starting Traffic Streams on the STC application. • The issue is reproducible even after enabling the Optimize Configuration for Long Term Test... option on STC. • When the VIAVI TestCenter Application gets to an unresponsive state, the ports become unavailable. • The issue is reproducible even after rebooting the test module. Below are some of the messages obtained from the logs. INFO  4360     - fmwk.bll.core.equip  - [PhyMessengerImpl::ProcessLostConnection] Lost connection to chassis 10.137.14.103 with ports currently reserved by user INFO  2780     - fmwk.bll.core.equip  - [PhyMessengerImpl::ProcessLostConnection] Lost connection to chassis 10.137.14.107 with ports currently reserved by user ERROR - [PeerSocket::ReadData] ACE recv_n() failed on slot = -1, ccpu = -1 with error 10054, Unknown error. ERROR - [PeerSocket::ReadData] ACE recv_n() failed on slot = 11, ccpu = 6 with error 10054, Unknown error. ERROR - [PeerSocket::ReadData] ACE recv_n() failed on slot = -1, ccpu = -1 with error 10054, Unknown error. ERROR - [PeerSocket::ReadData] ACE recv_n() failed on slot = 7, ccpu = 8 with error 10054, Unknown error. WARN  Session  - fmwk.ui.ses        - S57097: ProcessMessages is slow. 4128.3886 ms, msg count in event:1, msgs in queue:1097

N/A