VIAVI TestCenter: Do we support latency values in Latency-Jitter Mode for Detailed Streams results view?

VIAVI TestCenter: Do we support latency values in Latency-Jitter Mode for Detailed Streams results view?

• On the older modules like CV-10G-S and MX-10G-S we have the original Latency-Jitter Mode.  For these modules we supported latency, jitter and dropped frame count in this mode.   • The new counter mode: Latency with RFC 5481 Jitter Mode was introduced in 4.81 release that allows latency and jitter to be collected concurrently per stream ONLY for VIAVI FX3/MX3, 400G Appliance and 400G Modules • Since the newer modules FX3/FX2 and MX3/MX2 were designed for higher stream counts. The trade-off was a smaller number of counters for each counter mode, that was the initial reason the first counter (Latency-Jitter mode) isn't showing Lattency and Jitter on the same view) • Please refer to KB: SOL11740 -VIAVI TestCenter: How to find the supported result counters for a specific Module? • So you can validate the supported counters by each test module