VIAVI TestCenter: How to ARP stream blocks whose endpoints are on the same subnet?
Knowledge Base - FAQ
VIAVI TestCenter: How to ARP stream blocks whose endpoints are on the same subnet?
• Disable the "Use Gateway as ARP / ND Target" which can be found in Settings under the ARP/ND tab.
• Destination MAC Address of a stream with destination IP that is on the same subnet as the source should automatically be used in the traffic.
• Eth/IP - automatic
• Eth/VLAN/IP - not automatic (need to ARP) - the ARP will send to the Destination IP
• Eth/Vlan1/Vlan2/IP - not automatic (need to ARP) - the ARP will send to the Destination IP