VIAVI TestCenter: How to configure BGP LU on VIAVI TestCenter?
Knowledge Base - FAQ
VIAVI TestCenter: How to configure BGP LU on VIAVI TestCenter?
• Open VIAVI TestCenter Application.
• Connect to a chassis and reserve the ports.
• Configure your devices and enable BGP.
• Make sure that the BGP session gets established between your devices.
• Add some BGP routes to your configuration.
• On VIAVI TestCenter Application select All Devices at the left tree menu and Select the BGP tab and hit the Edit Routes button.
• At the IPv4 Routes tab set the SubAFI as Labeled IP, enable the MPLS Label and add the labels at the Custom MPLS Labels fields.
• Now you can configure stream blocks using the generated routes as source/destination.
• If you start a capture and after that the traffic, you will see the MPLS labels you configured.