VIAVI TestCenter: How to obtain debug logs on VIAVI TestCenter Application?
Knowledge Base - FAQ
VIAVI TestCenter: How to obtain debug logs on VIAVI TestCenter Application?
• Open VIAVI TestCenter Application, connect to the chassis and reserve some ports.
• Configure the test you will run.
• Click on the Apply button at the top menu.
• On VIAVI TestCenter go to Tools > Equipment Information > Port Group.
• Right-click on the port group at which you will enable debug logs, select Enable Logging and then click on the debug logs you will allow.
• After running your test, open again Tools > Equipment Information > Port Group.
• Right-click on the port and select Upload Port Group Logs.