VIAVI TestCenter: How to test with dynamic PAT where each connection requires a separate port translation because the source port at the public side differs for each connection?

VIAVI TestCenter: How to test with dynamic PAT where each connection requires a separate port translation because the source port at the public side differs for each connection?

• Use the napt wizard, drop it in the scriptwizards directory and run from custom tools to create a command sequence that will reconfigure the dynamic side once the NAT table has been seeded. Creates a stream per streamblock, so cannot really scale test with this, but it is a great script. VIAVI TestCenter NAPT Test - this points to TRN10389 which I can't seem to find in the KB but I do see it in Spark.- since the above link doesn't work at times, I also attached the contents from there to this KB article. You will need to download ActiveState Tcl Be sure to after install you see the iWidgets folder in the "C:\ActiveTcl\lib" folder.If you do not see the iWidgets folder, please try downloading a different version. • Example: • Previously I downloaded 8.6.13 and for some reason it did not have the iWidgets. • Later I downloaded 8.6.9 and this did have the iWidgets and this worked with the NAPT Test.