VIAVI TestCenter: LCD shows -Not Set- with Appliance C100-S3 and C50

• Currently we have issues with the C100-S3 and C50 the LCD display is showing -Not Set- after IP address is changed but the IP address is set correctly in the system and this is just cosmetic issue. • • The affecting FW are 5.47, 5.48, 5.49, and 5.50.  • The reason we did not detect this issue until now is because we ship the chassis with the default IP address and not aware of the issue until the IP address is changed. • This issue was found when we changed the IP address from the default. • This is happing every time the IP address is changed and rebooted.

N/A