VIAVI TestCenter: Port level DHCP and DHCPv6 request rates seem to get mixed up where the DHCPv6 subscribers get a total of the DHCP + DHCPv6 request rate
Knowledge Base - FAQ
• DHCP port level request rate set to 100 sessions/second
• DHCPv6 port level request rate set to 100 sessions/second
• Observed that DHCPv6 request rate was 200 sessions/second
• this rate was determined by observing the DHCP and DHCPv6PD "Currently Attempting" counter
• DHCP showed 0 "Currently Attempting"
• DHCPv6PD showed 200 "Currently Attempting"
•
• Expected either:
• DHCP at 50 sessions/second and DHCPv6 at 50 sessions/second or
• DHCP at 100 sessions/second and DHCPv6 at 100 sessions/second
N/A