VIAVI TestCenter : Validation error in DHCP test during an address release "Invalid address for Interface Ipv4If on Device xx. Broadcast address is not supported"

Knowledge Base - FAQ

Thursday, October 16, 2025

Question:

Test aborts with below validation errors while running DHCP test with /30 as prefix length. • Error: Invalid address for Interface Ipv4If on Device Device X. Broadcast address is not supported. • Error DHCPv4: Release Sessions XX failed with error: There were 1 validation error(s); aborting apply. Interface IPv4 4 on Device Device X has invalid Network Stack.

Answer:

N/A

Back to Knowledge Base