OTDR Testing

A Look at the Latest OTDR Testing Procedures and Equipment

Certify, maintain, and troubleshoot your fiber optic systems better with industry-leading OTDR test equipment and procedures.

OTDR Testing

With the rapid advancements in fiber optic technology and new fiber network deployments, OTDR testing methods have become indispensable for building, certifying, maintaining, and troubleshooting fiber optic systems.

An Optical Time Domain Reflectometer (OTDR) is an instrument used to create a virtual “picture” of a fiber optic cable route. The analyzed data can provide information on the condition and performance of the fibers, as well as any passive optical components along the cable path like connectors, splices, splitters and multiplexers.

Once this information has been captured, analyzed, and stored, it can be recalled as needed to evaluate the same cable over time.

Troubleshoot Fiber Optic Cable Failures with OTDRs

The OTDR is also the only fiber testing tool capable of troubleshooting fiber optic cable failures by locating the distance to the fault and identifying the type and cause of the fault, including breaks, bends, bad connectors, and any excessive insertion loss “events”. Rayleigh OTDR measurements are used for this technique, and while single-ended (uni-directional) tests can be performed, dual-ended bi-directional OTDR testing improves test accuracy. 

OTDR Form Factors

An OTDR instrument can be portable or rack-mounted for permanent placement and monitoring of a network with alarms triggered automatically if the fiber is compromised. 

Predictive OTDR Measurements

Along with the Rayleigh scattering method used to characterize fiber links, Raman and Brillouin OTDR technologies can also be used to predict breaks, monitor fiber health, and prevent service outages through temperature and strain measurements. These three techniques form a powerful combination for managing fiber cabling networks or utilizing the fiber for Distributed Fiber Optic Sensing.

Although originally intended for long haul fiber optic applications, newer generation OTDR tools can also be used to diagnose much shorter cables, such as internal aircraft and enterprise facility cabling such as structured cabling. Multiple-pulse acquisition OTDR techniques have also been developed to test more complicated configurations, including PON networks and fiber to the home (FTTH) deployments.

Contact sales to learn more about VIAVI OTDR Testing Equipment today, or use the OTDR selector tool to find the recommended tool and request an OTDR price quote.

 

  • Discover a new experience in fiber testing

    Find out how fiber certification is simpler than ever before

    Watch the promo video  Learn more
    Register your interest

  • Introducing the VIAVI Fiber Command Team!

    Learn how to get the job done right the first time!

  • OTDR Selector Tool

    Find the right OTDR test solution for your needs.

  • Poster

    Optical Time Domain Reflectometry (OTDR) Poster

    Learn what OTDR measures and how to configure OTDR settings. The poster also serves as a guide to OTDR trace analysis and Smart Link Mapper icon-based fiber link views.

  • Webinar

    Creating Meaningful Reports with T-BERD/MTS OTDRs

    Learn best practices for generating reports with OTDR test results.

  • Video

    Bidirectional Testing: How to use Loopback feature on VIAVI OTDR

  • Important Factors for Choosing an Optical Time Domain Reflectometer (OTDR)

    Learn how to select an OTDR that is appropriate for your fiber optic testing needs.

How Does an OTDR Work?

The OTDR sends a pulse of light energy (optical power), generated by a laser diode, into one end of an optical fiber. A photodiode measures the returning light energy or optical power (reflected and scattered back) over time and converts it into an electrical value that is sampled, amplified, and graphically displayed on a screen.

The location of each event and the overall cable length are calculated based on the round-trip time of the light pulse traveling through the fiber core. The insertion loss is calculated from the proportional amplitude change of the backscattered light.

Many modern OTDR tools automatically select the optimal acquisition parameters for a particular fiber by sending out test pulses in a process known as auto-configuration, auto setup, or auto test. Despite advanced technology that now allows many OTDR test systems to automatically determine the best settings for your test process, it is still important to understand what the underlying settings are and how they may impact your results

OTDR Testing Analogy

There are obvious comparisons between OTDR and the copper wire signal testing it has gradually replaced, as the communication networks have shifted to fiber optics. Another useful analogy can be found with Ultrasound technology. 

In medical imaging applications, high frequency (≥20KHz) inaudible sound waves are produced by the vibrating elements of an ultrasound transducer and reflected back to the source to create accurate images of bodily features. In much the same way, the reflected or scattered light waves from the OTDR allow the overall condition of the fiber core to be “seen”.

OTDR Test Terminology

Understanding the science behind OTDR begins with a few basic concepts that are important to the OTDR testing process.

  • Attenuation

    The reduction in optical power of the light signal as it is transmitted. Fiber attenuation is expressed in decibels per kilometer (dB/km). The degradation in signal may be due to bending, splices, connectors/connections, or the absorption and scattering properties of the fiber itself. See VIAVI attenuators.

  • Backscatter

    A term used to describe the dispersed reflection of light waves back in the direction from which they originated. The amount of backscatter is one indicator of total fiber attenuation, since light traveling back to the source represents a loss in downstream signal intensity. In OTDR testing, the amount of backscattered light is only about one-millionth of the test pulse.

  • Reflectance

    A measure of the proportion of light hitting a surface which is reflected off of it. Unlike backscattered light, reflected light is returned more directly to the light source. Connectors/connections and splices will reflect light back to the source, allowing the OTDR to determine the position, condition, and signal loss from these components.

  • Refraction

    Refraction is the bending of light waves as they pass from one transparent material type to another. The amount of light reflected is determined by the differences in the index of refraction of two fibers joined through splicing, impurities in the glass fiber, and material changes within a connector or along the fiber run.

OTDR Testing Process

Performing an OTDR test requires some basic setup, programming, test execution, and reporting processes to be followed.

  • Power on the OTDR and verify the battery is charged and the test display is functioning.
  • Clean and inspect the ends of all fibers under test, launch cables, connectors, and adapters.
  • Carefully connect the launch cable to the output port of the OTDR at one end and the fiber under test at the opposite end.
  • Select a pre-programmed test routine, based on the network type and test conditions, or set/adjust the test parameters appropriately. Manual OTDR test parameter settings typically include the following:
    • Range: Sets appropriate range (distance) based on the overall fiber length
    • Pulse Width: Sets the duration of each laser pulse emitted
    • Acquisition Time: Sets the time duration for averaging the measurements of reflected light
    • Refractive Index: Matches the index of the cable material being tested
    • Loss threshold settings for the system and individual elements or “events”
  • Run the OTDR for the necessary time to acquire the test results and “trace”
  • Store and/or upload test results as necessary
  • Carefully disconnect all cables, connectors, and adapters

OTDR Best Practices

Before reference cables and the fiber under test are connected for measurement, fiber cleaning and inspection practices are of the upmost importance. Learn more about the VIAVI Inspect Before You Connect methodology on our Fiber Inspection page.

Mating connectors between launch cables, fiber under test, and OTDR must be compatible to minimize reflectance. Imagine a hose bib with a loose or crooked connection to the hose itself, causing water to leak and spray backwards from the junction. This is similar to the impact of an incorrect OTDR connection, when air gaps allow too much light to be reflected back and overload the photodiode.

The use of a receive cable at the far end of the fiber cabling run is another recommended best practice. These cables provide a “monument” that can help to accurately measure overall cable length and loss at the final connector of the run. Learn more about fiber characterization.

The best handheld OTDR test systems include features for one touch operation and interfaces tailored for different skill levels. The VIAVI SmartOTDR Handheld Fiber Tester delivers improved productivity with automated pass/fail test results.

Interpreting the OTDR Test Results

Once the OTDR test is completed, the system will display the OTDR results in both numeric and graphical formats. The graph, also called trace, will show where each connector/connection, splice, or break is located, along with the signal loss (in dB) and reflection characteristics of each element.

Advanced VIAVI OTDR test equipment with features like Smart Link Mapper (SLM) also translate this trace data into an iconic linear view where each element and event is represented as an easy-to-read icon, with pass/fail information visible immediately, and the name of each component/event clearly shown. This feature also provides customized workflows and icons for applications like FTTH, PON networks, or Fiber to the Antenna (FTTA).

The overall fiber length and link loss are displayed once a test run is completed. If loss thresholds were initially set, Pass or Fail will be indicated for each element of the cable run.

Types of OTDR Test Equipment

Although feature sets, size, and cost vary significantly, there are three main categories of OTDR test equipment available on the market today. 

  • Benchtop
    This term typically describes the OTDR test equipment used in laboratories and production facilities. Benchtop devices can be placed on a laboratory workbench or in a production test bay, and usually have a larger display, more available expansion ports for applications like MPO testing, and a direct AC (outlet) power source. Benchtop OTDR test equipment may be used when a high level of accuracy, sensitivity or long-range measurement (with its inherent high power pulse intensity) is required.
  • Hand-held OTDR
    As the name implies, hand-held OTDR test equipment is lightweight (less than 1kg), portable, typically battery-powered, and optimized for use in the field. The user interface is usually simple and straightforward so that technicians can be easily trained to operate the OTDR. Hand-held OTDR meters can also integrate additional tools needed for fiber certification and troubleshooting, such as Visual Fault Locators (VFL), Optical Power Meters (OPM), and compact fiber inspection microscopes. Connectivity options including Wi-Fi or Bluetooth can be used to communicate test results and work orders quickly.
  • Embedded or Rack-Mounted OTDR
    Embedded OTDRs are designed and manufactured similar to many high-volume electronic products, with a small form factor that can be integrated easily within network monitoring equipment. Rack-mounted OTDRs are combined with an optical switch to automatically rotate across many fibers. A programmed test routine can prioritize critical fibers and important customers. These fiber monitoring applications can be used for either in-service or dark fiber monitoring.

OTDR Specifications

OTDR specifications are important to understand so one can choose the right OTDR for a dedicated application.

  • Dynamic range
    Expressed in decibels (db), the dynamic range is defined as the difference between the initial power level reflected from the fiber when set to maximum pulse width and the upper level of the noise floor of the detector. The dynamic range determines the maximum observable length of a fiber.
  • Event dead zone
    The event dead zone (EDZ) is the minimum distance that the OTDR can detect between two reflective events (typically two connections). In the case where the reflective events are more closely spaced than the EDZ, the OTDR will show them as one event.
  • Attenuation dead zone
    The attenuation dead zone (ADZ) defined in the IEC 61745 standard is the minimum distance after a reflective (e.g. connector) or attenuation (e.g. splice) event, where a non-reflective event (splice) can be measured. Much like the EDZ, the ADZ is dependent on the pulse width.
  • Wavelengths
    An OTDR sends a pulse of light based on to the wavelength(s) used for transmission when the fiber link is operational. The typical wavelengths are 850 nm and 1300 nm for multimode fiber and 1310 nm, 1550 nm and 1625 nm for single-mode fiber. Filtered 1625 nm or 1650 nm can be used for maintenance to avoid interference with the live traffic wavelength.

OTDR Manufacturers

By supporting the fastest-growing segment of the fiber testing market, OTDR equipment manufacturers have experienced ongoing expansion worldwide in all product categories, and this trend is expected to continue. 5G adoption is bringing new opportunities and challenges, with fiber monitoring, installation, and manufacturing operations all reacting to the ongoing demand. As an industry leading OTDR manufacturer, VIAVI is addressing the unprecedented customer requirements for OTDR safety, efficiency, and test product quality.

Calibrating OTDR Test Equipment

For all measurement equipment, periodic calibration is necessary to measure and correct equipment bias and reset functions based on reference standards. In industries where the accuracy of OTDR test results is essential, the IEC 61746 standard for calibration, as well as the TIA/EIA-455-226 standard (adopted from the IEC standard) are recognized.

The IEC standard includes specific practices for calibrating point-to-point accuracy, linearity, attenuation, power output and delay. Given the complexity, OTDR calibration is best left to OTDR equipment manufacturers or certified calibration labs.

The Future of OTDR Testing

Providing more functionality, accuracy, and resolution at a lower price point is an ongoing challenge. Improvement in OTDR auto test algorithms is continuing to lower the barrier of entry for technicians and increase acceptance. Improvements related to reflectance overload issues with short cable runs may help to expand the use of OTDR technology into new arenas.

Without technology such as OTDR testing, advanced application of fiber optics would not be feasible. The ability to “see” inside thousands of miles of optical fiber no thicker than a human hair has become both an incredible accomplishment and a practical necessity.

Over the next decade, new 5G networks carrying massive data loads, smart cities connected through communication networks, and the ongoing deployment of FTTH services will ratchet the industry demand for efficient, versatile, OTDR testing. With breakthrough OTDR innovations like Smart Link Mapper and Smart Acquisition making testing easier, more accurate, and more powerful, VIAVI is addressing the fiber installation and maintenance needs of the future.


OTDR Testing Blogs


Find additional resources by visiting: Fiber Testing, Passive Optical Networks (PON), XGS-PON

Products

Let Us Help

Contact us for more information, receive a price quote, or watch product demonstration videos. We’re here to help you get ahead.